ANALYSIS OF WIND- AND SHIP-INDUCED SEDIMENT RESUSPENSION IN DULUTH-SUPERIOR HARBOR1

ABSTRACT: Suspended solids and ammonium concentration profiles measured at five locations in Duluth-Superior Harbor during July-October 1985 were analyzed to quantify wind and ship effects on sediment resuspension and resulting harbor water quality. Wind components from the SE quadrant correlated strongly with depth-averaged suspended solids concentrations that were unaffected by ship passage or thermal stratification. Winds from that quadrant have the largest fetch in the harbor. The highest correlation (r²= 0.93) was with the 6-hour average of the ESE wind velocity component. Multiple linear regression analysis of data from post-ship passage concentration profiles yielded numerical estimates of settling velocities of 0.08 to 0.25 cm s^?1, typical of ship-resuspended sediments, and vertical eddy diffusivities of 4 to 13 cm² s¹. The results suggest that ambient vertical eddy diffusivities in the harbor are less than 4 cm² s^?1 in the absence of ship passages and with winds less than 5 m s^?1 (10 knots).     

DISTRIBUTION AND GRAIN-SIZE PARTITIONING OF METALS IN BOVFOM SEDIMENTS OF AN EXPERIMENTALLY ACIDIFIED WISCONSIN LAKE1

ABSTRACT: A study of concentrations and distribution of major and trace elements in surficial bottom sediments of Little Rock Lake in northern Wisconsin included examination of spatial variation and grain-size effects. No significant differences with respect to metal distribution in sediments were observed between the two basins of the lake, despite the experimental acidification of one of the basins from pH 6.1 to 4.6. The concentrations of most elements in the lake sediments were generally similar to soil concentrations in the area and were well below sediment quality criteria. Two exceptions were lead and zinc, whose concentrations in July 1990 exceeded the criteria of 50 μg/g and 100 μg/g, respectively, in both littoral and pelagic sediments. Concentrations of some elements, particularly Cu, Pb, and Zn, increased along transects from nearshore to midlake, following a similar gradient of sedimentary organic carbon. In contrast, Mn, Fe, and alkali/alkaline-earth elements were at maximum concentrations in nearshore sediments. These elements are less likely to partition to organic particles, and their distribution is more dependent on mineralogical composition, grain size, and other factors. Element concentrations varied among different sediment grain-size fractions, although a simple inverse relation to grain size was not observed. Fe, Mn, Pb, and Zn were more concentrated in a grain-size range 20–60 tm than in either the very fine or the coarse fractions, possibly because of the aggregation of smaller particles cemented together by organic and Fe/Mn hydrous-oxide coatings.     

ATRAZINE IN SPRING RUNOFF AS RELATED TO ENVIRONMENTAL SETTING EBRASKA, 19921

ABSTRACT: A synoptic sampling of five surface-water sites in central Nebraska was conducted by the U.S. Geological Survey as part of its National Water-Quality Assessment Program during storm runoff in May 1992 to relate transport, yields, and concentrations of atrazine to environmental setting. Atrazine was the most extensively applied pesticide in the study unit. Atrazine transport was related to the size of contributing drainage area, quantity of atrazine applied, amount of precipitation, and volume of stream-flow. Estimated yields and mean concentrations of atrazine were related to the percentage of cropland in a drainage area. The largest estimated yields and mean concentrations of atrazine in surface water were associated from drainage areas with the highest percentage of cropland, and the smallest was associated with the smallest amount of cropland. Atrazine concentrations increased as streamflow increased but decreased at or near the time of peak streamflows, perhaps due to dilution. Atrazine concentrations then increased and remained elevated far into the stream recession. Atrazine is a regulated contaminant in finished public-water supplies. Large concentrations of atrazine could affect the management of public-water supplies because atrazine remains in solution in contrast to many other pesticides that are more easily removed.     

Environmental site assessments and audits: Building inspection requirements

Environmental site assessment criteria were originally developed by organizations that focused, almost exclusively, on surface, subsurface, and pollution source contamination. Many of the hazards associated with indoor environments and building structures were traditionally not considered when evaluating sources and entities of environmental pollution. Since a large number of building materials are potentially hazardous, careful evaluation is necessary. Until recently, little information on building inspection requirements of environmental problems has been published. Traditionally, asbestos has been the main component of concern. The ever-changing environmental standards have dramatically expanded the scope of building surveys. Indoor environmental concerns, for example, currently include formaldehyde, lead-based paint, polychlorinated biphenyls, radon, and indoor air pollution. Environmental regulations are being expanded and developed that specifically include building structures. These regulatory standards are being triggered by an increased awareness of health effects from indoor exposure, fires, spills, and other accidents that have resulted in injury, death, and financial loss. This article discusses various aspects of assessments for building structures.     

Woodlot scale: A method for rapid assessment of woodlot values

A method is described for the rapid survey and determination of the ecological value of woodlots. The three dominant tree species in a stand are given a visual ranking that is converted to awoodlot index through the use of species adaptation values. The woodlot index is scaled by presettlement vegetation type to yield awoodlot scale. The ecologically most valuable woodlots in a region are identified by using the woodlot scale and data on woodlot area, human disturbance, and tree density. The woodlot index corresponds closely to results from conventional methods of woodlot surveys. This method should be valuable to land-use planners for environmental impact assessment and regional planning.     

Study of factors associated with risk of work-related stairway falls

This report describes a study of stairway risk factors based on video tape recordings of workers using 31 flights of stairs selected from among the industries with the highest frequency and severity rates for stair-related injuries. The video tapes were reviewed to identify all incidents, i.e., falls, trips, slips, missteps, and moments of temporary instability. The characteristics of the 98 stair users who were involved in an incident were compared to the characteristics of a matched group of stair users who did not have incidents. The factors that best discriminated between the incident group and the nonincident group were: (a) The incident group tended to be those whose movement was impeded by others and who were older; and (b) The nonincident group tended to be those who were wearing glasses and those who were very large or heavy individuals. The influence of stairway physical features on the risk of injury was examined using correlation analysis. The measure of risk was the incidence rate (observed incidents per number of observed uses) for each flight as well as for each tread. Among the several variables significantly correlated with higher incidence rate are: (a) higher effective riser height and less effective tread depth; the safest stairs have an effective riser height not greater than 7 in. (18 cm) and an effective tread depth no less than 11 in. (27 cm); and (b) for descent only (92% of the injuries), the size of the nosing projection; it appears that nosing projections that exceed $\text{11}\text{16}$ in. (1.8 cm) are associated with higher incidence rates.     

Title 16 united states code §55 and its implications for management of concession facilities in Yosemite National Park

Yosemite National Park is one of the nation's most scenic and ecologically/geologically important parks. Unfortunately, the park is subject to extensive development of concession facilities and associated high levels of visitor use. Those concerned with preservation of the park's resources have attempted to limit the types and extent of such facilities to reduce adverse impacts. Strictly speaking, resolution of the preservation versus use controversy must be based on whether the National Park Service is adhering to its legislative mandate to regulate development and use in the parks. The common interpretation of legislative mandates for national parks, including Yosemite, is that they call for a difficult balancing between the conflicting goals of preservation and use. Accordingly, although concession developments cause significant impacts, they usually have been interpreted to be within the legal discretion allowed the secretary of the interior. However, the usual interpretations of the meanings of legislative mandates for Yosemite National Park have not considered Title 16 United States Code §55, which is a very restrictive statute limiting concession facilities. Many of the limitations imposed on concession facilities by the plain language of the statute have been exceeded. If it can be shown that 16 United States Code §55 is a valid statute, the policy implications for park management in Yosemite National Park would be considerable — namely, that significant reductions in concession facilities could be required. This article examines whether the statute can reasonably be thought to be valid and encourages others to conduct further examination of this question.     

Determining regional water quality patterns and their ecological relationships

A multivariate statistical method for analyzing spatial patterns of water quality in Georgia and Kansas was tested using data in the US Environmental Protection Agency's STORET data system. Water quality data for Georgia and Kansas were organized by watersheds. We evaluated three questions: (a) can distinctive regional water quality patterns be detected and predicted using only a few water quality variables, (b) are regional water quality patterns correlated with terrestrial biotic regions, and (c) are regional water quality patterns correlated with fish distributions? Using existing data, this method can distinguish regions with water quality very different from the average conditions (as in Georgia), but it does not discriminate well between regions that do not have diverse water quality conditions (as in Kansas). Data that are spatially and temporally adequate for representing large regions and for multivariate statistical analysis are available for only a few common water quality parameters. Regional climate, lithology, and biotic regimes all have the potential to affect water quality, and terrestrial biotic regions and fish distributions do compare with regional water quality patterns, especially in a state like Georgia, where watershed characteristics are diverse. Thus, identifiable relationships between watershed characteristics and water quality should allow the development of an integrated landaquatic classification system that would be a valuable tool for resource management. Because geographical distributions of species may be limited by Zoogeographic and environmental factors, the recognition of patterns in fish distributions that correlate with regional water quality patterns could influence management strategies and aid regional assessments.     

FACTORS INFLUENCING ACUTE TOXICfrY OF COAL ASH TO RAINBOW TROUT (SALMO GAIRDNERI) AND BLUEGILL SUNFISH (LEPOMIS MACROCHIRUS)1

ABSTRACT: The potentially toxic components in coal ash (ash particles, heavy metals) were evaluated in laboratory static, acute (96 hr) bioassays, both separately and in various combinations with extreme pH (5.0 and 8.5), using rainbow trout (Salmo gairdneri) and bluegifi sunfish (Lepomis macrochirus). Ash particle morphology and metal distribution anlaysis, using electron microscopy and surface-subsurface analysis by ion microscopy, showed that metals could be either clumped or evenly distributed on the surface of fly ash. Surface enrichment on fly ash particles from electrostatic precipitators, as measured by ion microscopy, was found for cadmium, copper, chromium, nickel, lead, mercury, titanium, arsenic, and selenium. Bottom (heavy) ash was not acutely toxic to either fish species at concentrations of up to 1500 mg/l total suspended solids (TSS) at pH 5.0, 7.5, or 8.5. Fly ash particles were not acutely toxic to blue-gill at levels up to 1360 mg/l TSS. Rainbow trout were highly sensitive to fly ash (25 to 60 percent mortality) at concentrations of 4.3 to 20.5 mg/I TSS when dissolved metal availability was high but were not sensitive at higher particulate concentrations (58 to 638 mg/I TSS) when dissolved metals were low. When metals were acid-leached from fly ash prior to testing, no rainbow trout mortality occurred at TSS concentrations of up to 2,350 mg/l TSS. When the percent of dissolved metal was high (e.g., 50–90 percent of the total), fish mortality was increased. Rainbow trout were nearly two orders of magnitude more sensitive than bluegill when subjected to a blend of cadmium, chromium, copper, nickel, lead, and zinc. The two species were similar in their acute sensitivity to acidic pH at levels at or below 4.0 and alkaline pH of 9.1. If the pH of coal ash effluent is contained within the range 6.0 to 9.0, acute toxicity to fish can be attributed to trace element availability from fly ash but not heavy ash. Control of holding pond and effluent pH and maximizing pond residence time are important strategies for minimizing effects of ash pond discharges on fish.