Hazard property classification of waste according to the recent propositions of the EC using different methods

Hazard classification of waste is a necessity, but the hazard properties (named “H” and soon “HP”) are still not all defined in a practical and operational manner at EU level. Following discussion of subsequent draft proposals from the Commission there is still no final decision. Methods to implement the proposals have recently been proposed: tests methods for physical risks, test batteries for aquatic and terrestrial ecotoxicity, an analytical package for exhaustive determination of organic substances and mineral elements, surrogate methods for the speciation of mineral elements in mineral substances in waste, and calculation methods for human toxicity and ecotoxicity with M factors.In this paper the different proposed methods have been applied to a large assortment of solid and liquid wastes (>1 0 0).Data for 45 wastes – documented with extensive chemical analysis and flammability test – were assessed in terms of the different HP criteria and results were compared to LoW for lack of an independent classification. For most waste streams the classification matches with the designation provided in the LoW. This indicates that the criteria used by LoW are similar to the HP limit values.This data set showed HP 14 ‘Ecotoxic chronic’ is the most discriminating HP. All wastes classified as acute ecotoxic are also chronic ecotoxic and the assessment of acute ecotoxicity separately is therefore not needed. The high number of HP 14 classified wastes is due to the very low limit values when stringent M factors are applied to total concentrations (worst case method). With M factor set to 1 the classification method is not sufficiently discriminating between hazardous and non-hazardous materials. The second most frequent hazard is HP 7 ‘Carcinogenic’. The third most frequent hazard is HP 10 ‘Toxic for reproduction’ and the fourth most frequent hazard is HP 4 “Irritant – skin irritation and eye damage”. In a stepwise approach, it seems relevant to assess HP 14 first, then, if the waste is not classified as hazardous, to assess subsequently HP 7, HP 10 and HP 4, and then if still not classified as hazardous, to assess the remaining properties.The elements triggering the HP 14 classification in order of importance are Zn, Cu, Pb, Cr, Cd and Hg. Progress in the speciation of Zn and Cu is essential for HP 14. Organics were quantified by the proposed method (AFNOR XP X30-489) and need no speciation. Organics can contribute significantly to intrinsic toxicity in many waste materials, but they are only of minor importance for the assessment of HP 14 as the metal concentrations are the main HP 14 classifiers. Organic compounds are however responsible for other toxicological characteristics (hormone disturbance, genotoxicity, reprotoxicity…) and shall be taken into account when the waste is not HP 14 classified.     

Toward a new understanding of the links between poverty and illegal wildlife hunting

Conservation organizations have increasingly raised concerns about escalating rates of illegal hunting and trade in wildlife. Previous studies have concluded that people hunt illegally because they are financially poor or lack alternative livelihood strategies. However, there has been little attempt to develop a richer understanding of the motivations behind contemporary illegal wildlife hunting. As a first step, we reviewed the academic and policy literatures on poaching and illegal wildlife use and considered the meanings of poverty and the relative importance of structure and individual agency. We placed motivations for illegal wildlife hunting within the context of the complex history of how wildlife laws were initially designed and enforced to indicate how hunting practices by specific communities were criminalized. We also considered the nature of poverty and the reasons for economic deprivation in particular communities to indicate how particular understandings of poverty as material deprivation ultimately shape approaches to illegal wildlife hunting. We found there is a need for a much better understanding of what poverty is and what motivates people to hunt illegally.     

Phytopumping for hydraulic control of an arsenic plume

Phytoremediation, the use of plants for in situ contaminant cleanup, is gaining new appreciation as an aesthetically pleasing, sustainable method that naturally makes use of solar power. Hybrid poplars are widely used because they grow rapidly and have high transpiration rates, making them advantageous for hydraulic control of groundwater. However, the tendency for trees and other vegetation to uptake metals may be a disadvantage in some settings due to potential redistribution of metals from groundwater to the ground surface. Therefore, a pilot test in the upper midwestern United States was implemented to evaluate the applicability of poplars to groundwater withdrawal and metals transport. © 2009 Wiley Periodicals, Inc.     

The effects of partial mortality on the fecundity of three common Caribbean corals

The recent intensification of human disturbances in the Caribbean has increased the prevalence of partial mortality on coral colonies. Partial mortality can change colony size by directly shrinking colonies or by splitting colonies into fragments. A reduction in colony size can also adversely affect fecundity and fitness as internal resources shift away from reproduction toward colony maintenance. This study aimed to determine whether three Caribbean coral species, Siderastrea siderea, Montastraea faveolata, and Diploria strigosa, along the reef tract in Puerto Morelos, Mexico (20^o52′N, 86^o51′W), continued to dedicate resources to reproduction when colonies were fragmented to pre-maturation size. Contrary to expectations, eggs were found in colonies that were smaller than the maturation size and had been subjected to partial mortality. The continued dedication of resources toward reproduction, even in the smallest colonies, suggests that resource trade-offs away from reproduction are not as rigid as previously suggested in stressed corals.     

Estimation of Ambient PM2.5 Concentrations in Maryland and Verification by Measured Values

Abstract

In 1997, Maryland had no available ambient Federal Reference Method data on particulate matter less than 2.5 μm in aerodynamic diameter (PM_2.5), but did have annual ambient data for PM smaller than 10 μm (PM₁₀) at 24 sites. The PM₁₀ data were analyzed in conjunction with local annual and seasonal zip-code-level emission inventories and with speciated PM_2.5 data from four nearby monitors in the IMPROVE network (located in the national parks, wildlife refuges, and wilderness areas) in an effort to estimate annual average and seasonal high PM_2.5 concentrations at the 24 PM₁₀ monitor sites operating from 1992 to 1996. All seasonal high concentrations were estimated to be below the 24-hr PM_2.5 National Ambient Air Quality Standards (NAAQS) at the sites operating in Maryland between 1992 and 1996. The estimates also indicated that 12 monitor sites might exceed the 3-year annual average PM_2.5 NAAQS of 15 ug/m³, but Maryland’s air quality shows signs that it has been improving since 1992. The estimates also were compared with actual measurements after the PM_2.5 monitor network was installed. The estimates were adequate for describing the chemical composition of the PM_2.5, forecasting compliance status with the 24-hr and annual standards, and determining the spatial variations in PM_2.5 across central Maryland.     

Derivation of synthetic fuel from waste plastic: investigation of engine operating characteristics on DI diesel engine

The utilization of plastic in day to day life is ever-increasing and has generated a large amount of plastic garbage that needs proper disposal to save the environment from harmful pollution. The plastic waste management becomes a pressing concern in the present scenario in developing countries like India. This research article evaluates the potential of synthetic fuel (SF) derived from waste plastics collected from the local shops. In this current investigation, the SF blends are tested in a direct injection diesel engine to analyze the performance and emission characteristics of the engine. Three different blends were made namely SF20, SF40, and SF60 on a volumetric basis and the tests were carried out. From the experimental results, it was found that brake thermal efficiency (BTE) of the fuel blends was reduced as compared with neat diesel operation regardless of loads whereas SF20 showed a similar trend as that of diesel operation. The analysis of the emission characteristics revealed that the SF20 blends reduced dangerous smoke and carbon monoxide emission as compared with other test fuels. From the overall results, SF20 showed superior performance and emission aspects as compared with other SF blends whereas the engine operated smoothly up to 60% of SF blending at all loading conditions.

     

Hepatotoxicity of graphene oxide in Wistar rats

Environmental Science and Pollution Research - Graphene oxide (GO) has a multitude of applications in areas of nanomedicine, electronics, textile, water purification, and catalysis among others. GO...     

Proteomic insights into Lysinibacillus sp.-mediated biosolubilization of manganese

Environmental Science and Pollution Research - There has been alarming depletion of manganese (Mn) reserves owing to the ongoing extensive mining operations for catering the massive industrial...