Solid State Reactions of Potato Starch with Urea and Biuret

Reaction of granular potato starch with urea and biuret resulted in the formation of products, which were soluble neither in cold nor boiling water. The net reaction was a monosubstitution of the hydrogen atom in one hydroxyl group in each D-glucose unit of starch with the either CO–NH₂ or CO–NH–CO–NH₂ moiety, respectively. Properties of the products, particularly these with urea, depended on the mode of reaction. Reactions were carried out in the microwave oven as well as with convection heating. The products retained the granular form of starch but a vast majority of granules were damaged. -Amylolysis of those materials revealed that their susceptibility to the enzyme increasing in the order: starch-amylolysis with simultaneous insolubility in water make these products suitable as ruminant fodder and, eventually, biodegradable material.     

Atmospheric BTEX-concentrations in an area with intensive street traffic

The major threat to clean air in developed and industrializing countries is now posed by traffic emissions. The effects of traffic road modifications on the air quality are, however, rarely reported in the literature. The aim of this study was to determine the influence of the modernization and renovation of a traffic artery in the region of Mortsel (Antwerp, Belgium) on the concentration of volatile organic compounds such as: benzene, toluene, ethylbenzene and m-, p-, o-xylenes (BTEX). The original goal of the reconstruction works was to reduce the traffic lanes of one of the busiest streets in Antwerp, in order to discourage the road traffic and in consequence also to improve the air quality in this region. The average concentrations of BTEX before these works in 2003 were: 1.6, 7.0, 0.9, 2.3, and 0.9 μg/m³, for benzene, toluene, ethylbenzene, m + p xylenes, and o-xylene, respectively. However, after the completion of the works, in 2005, they were slightly higher: 2.5, 9.5, 1.6, 3.4, and 1.3 μg/m³, respectively. The scatter plots of benzene against toluene, ethylbenzene and xylenes in 2003 and 2005 showed very good correlations. This fact indicated that all of the measured compounds originated from the same source, namely the road traffic. Moreover, the data obtained from an air-monitoring station at less than 6 km distance from the sampling site (operated by the Flemish Environment Agency, and located in Borgerhout, Antwerp), confirmed the lack of influence of background concentrations of BTEX. The obtained results led to the conclusion that the reduction of the number of traffic lanes had apparently increased the traffic jams and also increased the emission from cars. Therefore, these modernization works had even a negative impact on the local concentration of traffic-related pollutants as BTEX.     

Bacterial contamination of dental unit waterlines

Safety of patients and dental personnel requires the appropriate microbiological water quality in dental units. During treatment, patients and dental workers are exposed both to direct contact with bacteria-contaminated water in the form of splatter and with contaminated water aerosol emitted during work by unit handpieces, including rotating and ultrasonic instruments. The aim of the study was to determine the qualitative and quantitative contamination of water in dental unit reservoirs with aerobic and facultative anaerobic bacteria. The study material included water sampled from 107 dental unit reservoirs located in dental surgeries of public health centres. Conventional microbiological methods were used to identify microorganisms. The study shows that the contamination of water in dental unit reservoirs with aerobic and facultative anaerobic bacteria is commonplace. The mean concentration of mesophile bacteria in dental unit reservoir water exceeded 1.1?×?10⁵ cfu/ml. The prevailing species were Gram-negative bacteria of the families Burkholderiaceae, Pseudomonadaceae, Ralstoniaceae and Sphingomonadaceae. The most numerous bacteria were Ralstonia pickettii, constituting 49.33 % of all the identified aerobic and facultative anaerobic bacteria. Among Gram-positive rods, the most numerous were bacteria of the genus Brevibacterium (5.83 %), while the highest percentage shares (13.25 %) of all Gram-positive microorganisms were found for Actinomyces spp. The study confirms the necessity of regular monitoring of microbial contamination of dental unit waterlines (DUWL) and use of various water treatment procedures available to disinfect DWUL.     

Sulfadimethoxine and sulfaguanidine: their sorption potential on natural soils

Sulfonamides (SAs) are one of the oldest groups of veterinary chemotherapeutic agents. As these compounds are not completely metabolized in animals, a high proportion of the native form is excreted in feces and urine. They are therefore released either directly to the environment in aquacultures and by grazing animals, or indirectly during the application of manure or slurry. Once released into the environment, SAs become distributed among various environmental compartments and may be transported to surface or ground waters. The physicochemical properties of SAs, dosage and nature of the matrix are the factors mainly responsible for their distribution in the natural environment. Although these rather polar compounds have been in use for over half a century, knowledge of their fate and behavior in soil ecosystems is still limited. Therefore, in this work we have determined the sorption potential of sulfadimethoxine and sulfaguanidine on various natural soils. The influence on sorption of external factors, such as ionic strength and pH, were also determined. The sorption coefficients (K_d) obtained for the sulfonamides investigated were quite low (from 0.20 to 381.17 mL g⁻¹ for sulfadimethoxine and from 0.39 to 35.09 mL g⁻¹ for sulfaguanidine), which indicated that these substances are highly mobile and have the potential to run off into surface waters and/or infiltrate ground water. Moreover, the sorption of these pharmaceuticals was found to be influenced by OC, soil solution pH and ionic strength, with higher K_d values for soils of higher OC and lower K_d values with increasing pH and ionic strength.     

The trophic status of Suwałki Landscape Park lakes based on selected parameters (NE Poland)

This study describes changes in the trophic status of 12 lakes within Suwa?ki Landscape Park (SLP). All of the trophic classifications of the lakes were based on the trophic continuum division. Trophic status was determined by means of multiparameter indices using several diverse criteria. In this study, the assessment of the trophic status of lakes included water quality; abundance and biomass of bacterioplankton, phytoplankton, and zooplankton; and primary production of phytoplankton. The Carlson trophic state index (TSI) describes the level of water fertility and indicated the dominance of moderately eutrophic waters. Lakes Perty, Jeglówek, and Hańcza have a trophic status that indicates mesotrophy (TSI <50). The trophic status of the studied lakes was determined based on the bacterial abundance and clearly showed a lack of oligotrophic lakes in SLP. Based on the number of bacteria, only Lake Szurpi?y can be classified as β-mesotrophic, whereas Lake Linówek can be characterized as hypertrophic with some features typical for humic waters. The greatest value of gross primary production was observed in Lake Linówek (126.4 mg C/m³/h). The phytoplankton trophy index varied from 1.59 to 2.28, and its highest value, which indicated eutrophy, was determined for Lake Udziejek. In the case of Lakes Hańcza, Szurpi?y, Perty, Jeglówek, and Kojle, the index ranged from 1.25 to 1.74, which indicated mesotrophy. The majority of the lakes were classified as mesoeutrophic (1.75–2.24). The highest trophic status was assessed for lakes with a marked dominance of cyanobacteria (Lake Przechodnie, Lake Krajwelek, Lake Udziejek, and Lake Pogorza?ek), which is commonly recognized as an indicator of high trophic status. Considering all of the indices of trophic status, the analysis of rotifer community structure indicates that the studied group of lakes is mesoeutrophic or eutrophic. The values of crustacean zooplankton indices indicated that the trophic status of the studied lakes was close to that determined using a TSI. The parameters of zooplankton abundance and species structure allowed for the observance of changes in the tropic levels of lakes, which are difficult to detect by a chemical assay alone.     

Cytotoxicity of resorcinol under short- and long-term exposure in vitro.

Cytotoxicity of resorcinol to 3T3 fibroblast in short- (3 hrs) and long-term (72 hrs or 6 weeks) exposure was investigated. The effects of resorcinol on cell viability (neutral red uptake, NRU assay), mitochondrial function (MTT assay) and total cell protein (Kenacid Blue assay) were estimated. As a model for long-term exposure an INTEGRA CL 6-WELL bioreactor was used. The concentrations of resorcinol producing 20, 50 and 80% inhibition of cell growth in the NRU test were lower than in the MTT test after 3 hrs of exposure. The use of an INTEGRA CL 6-WELL bioreactor allows continuous culturing and exposure to test chemical of cells for several weeks, but the strong adhesiveness of fibroblast and forming aggregates make it difficult to remove them from chambers. Resorcinol in concentration of 1 microg/cm(3) did not decrease the viability of cells to 50% of control in long-term exposure in the bioreactor.     

Toxicity and biodegradability of sulfonamides and products of their photocatalytic degradation in aqueous solutions

The photocatalytic degradation of sulfacetamide, sulfathiazole, sulfamethoxazole and sulfadiazine in water solutions during their illumination of UV radiation (lambda(max) 366 nm) with TiO2 catalyst was examined. The growth-inhibition effect of sulfonamides and intermediate products theirs photodegradation was investigated in aqueous solution with the green alga Chlorella vulgaris. The biodegradability of the investigated compounds was determined in the illuminated solutions and is expressed as Biochemical Oxygen Demand. It was found that all of the investigated sulfonamides in the initial solutions were resistant to biodegradation and were toxic relative to C. vulgaris. The toxicity (EC50 values) relative to C. vulgaris increased in the following order sulfacetamide, sulfathiazole, sulfamethoxazole, sulfadiazine. All of the investigated sulfonamides undergo photocatalytic degradation. The toxicity of intermediate products of the sulfonamides degradation was significantly lower than the toxicity of sulfonamides in the initial solutions and was dependent on illumination time and degradation rate. The intermediate products of photocatalysis in contrast to the initial sulfonamides, might be mineralized using biological methods.     

The Cytotoxicity of Some Organic Solvents on Isolated Hepatocytes in Monolayer Culture

The cytotoxic effects of volatile and water-insoluble organic solvents (ethylbenzene, tetrachloroethylene, n-hexane) were tested on isolated hepatocytes in monolayer culture by using the 3-(4,5 dimethylthiazol-2-yl)-2,5 diphenyltetrazolium bromide (MTT) reduction assay. All of the tested compounds inhibited metabolic activity of hepatocytes and this effect depended on the concentration of solvents in the incubatory medium. The presence of fetal calf serum in the medium did not change the cytotoxicity of xenobiotics. IC₅₀ values calculated on the basis of the MTT assay indicated that ethylbenzene was more cytotoxic than tetrachloroethylene and n-hexane. Using hepatocyte monolayer culture and the MTT assay to assess cytotoxicity of organic solvents causes many technical problems. It seems that it cannot be used as a rapid, cheap, and credible method.     

Exposure to impulse noise at an explosives company: a case study

Impulse noise encountered in workplaces is a threat to hearing. The aim of this study was to assess the occupational exposure to impulse noise produced by detonation of dynamite on the premises of an explosives company. Test points were located on the blast test area (inside and outside the bunker) and in work buildings across the site. Noise propagation measurement was performed during 130 blast tests at nine measurement points. At every point, at least 10 separate measurements of A-weighted equivalent sound pressure level (L_Aeq), maximum A-weighted sound pressure level (L_Amax) and C-weighted peak sound pressure level (L_Cpeak) were made. Noise recorded in the blast test area exceeded occupational exposure limits (OELs). Noise levels measured in buildings did not exceed OELs. Results of the survey showed that for 62% of respondents, impulse noise causes difficulties in performing work. The most commonly reported symptoms include headaches, nervousness and irritability.     

Vitrification as an alternative to landfilling of tannery sewage sludge

Due to high content of heavy metals such as chromium, tannery sewage sludge is a material which is difficult to be biologically treated as it is in the case of organic waste. Consequently, a common practice in managing tannery sewage sludge is landfilling. This poses a potential threat to both soil and water environments and it additionally generates costs of construction of landfills that meet specific environment protection requirements. Vitrification of this kind of sewage sludge with the addition of mineral wastes can represent an alternative to landfilling.The aim of this study was to investigate the possibility of obtaining an environmentally safe product by means of vitrification of tannery sewage sludge from a flotation wastewater treatment process and chemical precipitation in order to address the upcoming issue of dealing with sewage sludge from the tannery industry which will be prohibited to be landfilled in Poland after 2016. The focus was set on determining mixtures of tannery sewage sludge with additives which would result in the lowest possible heavy metal leaching levels and highest hardness rating of the products obtained from their vitrification.The plasma vitrification process was carried out for mixtures with various amounts of additives depending on the type of sewage sludge used. Only the materials of waste character were used as additives.One finding of the study was an optimum content of mineral additives in vitrified mixture of 30% v/v waste molding sands with 20% v/v carbonate flotation waste from the zinc and lead industry for the formulations with flotation sewage sludge, and 45% v/v and 5% v/v, respectively, for precipitation sewage sludge. These combinations allowed for obtaining products with negligible heavy metal leaching levels and hardness similar to commercial glass, which suggests they could be potentially used as construction aggregate substitutes. Incineration of sewage sludge before the vitrification process lead to increased hardness of the vitrificates and reduced leaching of some heavy metals.