Spatial and temporal variability in urban fine particulate matter concentrations

Identification of hot spots for urban fine particulate matter (PM(2.5)) concentrations is complicated by the significant contributions from regional atmospheric transport and the dependence of spatial and temporal variability on averaging time. We focus on PM(2.5) patterns in New York City, which includes significant local sources, street canyons, and upwind contributions to concentrations. A literature synthesis demonstrates that long-term (e.g., one-year) average PM(2.5) concentrations at a small number of widely-distributed monitoring sites would not show substantial variability, whereas short-term (e.g., 1-h) average measurements with high spatial density would show significant variability. Statistical analyses of ambient monitoring data as a function of wind speed and direction reinforce the significance of regional transport but show evidence of local contributions. We conclude that current monitor siting may not adequately capture PM(2.5) variability in an urban area, especially in a mega-city, reinforcing the necessity of dispersion modeling and methods for analyzing high-resolution monitoring observations.     

Assessing nitrogen and phosphorus removal potential of five plant species in floating treatment wetlands receiving simulated nursery runoff

The feasibility of using floating treatment wetlands (FTWs) to treat runoff typical of commercial nurseries was investigated using two 8-week trials with replicated mesocosms. Plants were supported by Beemat rafts. Five monoculture treatments of Agrostis alba (red top), Canna × generalis ‘Firebird’ (canna lily), Carex stricta (tussock sedge), Iris ensata ‘Rising Sun’ (Japanese water iris), Panicum virgatum (switchgrass), two mixed species treatments, and an unplanted control were assessed. These plant species are used for ornamental, wetland, and biofuel purposes. Nitrogen (N) and phosphorus (P) removals were evaluated after a 7-day hydraulic retention time (HRT). N removal (sum of ammonium-N, nitrate-N, and nitrite-N) from FTW treatments ranged from 0.255 to 0.738 g·m^?2·d^?1 (38.9 to 82.4% removal) and 0.147 to 0.656 g·m^?2·d^?1 (12.9 to 59.6% removal) for trials 1 and 2, respectively. P removal (phosphate-P) ranged from 0.052 to 0.128 g·m^?2·d^?1 (26.1 to 64.7% removal) for trial 1, and 0.074 to 0.194 g·m^?2·d^?1 (26.8 to 63.2% removal) for trial 2. Panicum virgatum removed more N and P than any other FTW treatment and the control in both trials. Results show that species selection and timing of FTW harvest impact the rate and mass of nutrient remediation. FTWs can effectively remove N and P from runoff from commercial nurseries.

     

Debunking myths about sustainable remediation

Sustainable remediation concepts have evolved during the decade 2007–2017. From the establishment of the first Sustainable Remediation forum (SURF) in 2007, to publication of ASTM and ISO standards by 2017. Guidance has been developed around the world to reflect local regulatory systems, and much has been learned in applying sustainability assessment to contaminated site management projects. In the best examples, significant improvements in project sustainability have been delivered, including concurrent reduction of the environmental footprint of the remediation program, improved social performance, and cost savings and/or value creation. The initial advocates for the concept of sustainable remediation were quickly supported by early adopters who saw its potential to improve the remediation industry's performance, but they also had to overcome some inertia and scepticism from other parties. During the debates and discussions that occurred at numerous international conferences and SURF workshops around the world, various opinions were formed and positions stated. Some proved to be correct, others not so. With the recent publication of ISO Standard 18504 and the benefit of a decade's‐worth of hindsight on sustainable remediation programs implementation and project delivery, this paper summarizes a number of myths and misunderstandings that have been stated regarding sustainable remediation and seeks to debunk them. Sustainable remediation assessment shows us how to manage unacceptable risks to human health and the environment in the best, that is to say the most sustainable, way. It provides the contaminated land management industry a framework to incorporate sustainable development principles into remediation projects and deliver significant value for affected parties and society more broadly. In dispelling some myths about sustainable remediation set out in this paper, it is hoped that consistent application of ISO18504/SuRF‐UK (or equivalently robust guidance) will facilitate even wider use of sustainable remediation around the world.     

A review of emerging technologies for remediation of PFASs

The need for remediation of poly‐ and perfluoroalkyl substances (PFASs) is growing as a result of more regulatory attention to this new class of contaminants with diminishing water quality standards being promulgated, commonly in the parts per trillion range. PFASs comprise >3,000 individual compounds, but the focus of analyses and regulations has generally been PFASs termed perfluoroalkyl acids (PFAAs), which are all extremely persistent, can be highly mobile, and are increasingly being reported to bioaccumulate, with understanding of their toxicology evolving. However, there are thousands of polyfluorinated “PFAA precursors”, which can transform in the environment and in higher organisms to create PFAAs as persistent daughter products. Some PFASs can travel miles from their point of release, as they are mobile and persistent, potentially creating large plumes. The use of a conceptual site model (CSM) to define risks posed by specific PFASs to potential receptors is considered essential. Granular activated carbon (GAC) is commonly used as part of interim remedial measures to treat PFASs present in water. Many alternative treatment technologies are being adapted for PFASs or ingenious solutions developed. The diversity of PFASs commonly associated with use of multiple PFASs in commercial products is not commonly assessed. Remedial technologies, which are adsorptive or destructive, are considered for both soils and waters with challenges to their commercial application outlined. Biological approaches to treat PFASs report biotransformation which creates persistent PFAAs, no PFASs can biodegrade. Water treatment technologies applied ex situ could be used in a treatment train approach, for example, to concentrate PFASs and then destroy them on‐site. Dynamic groundwater recirculation can greatly enhance contaminant mass removal via groundwater pumping. This review of technologies for remediation of PFASs describes that:

• GAC may be effective for removal of long‐chain PFAAs, but does not perform well on short‐chain PFAAs and its use for removal of precursors is reported to be less effective;
• Anion‐exchange resins can remove a wider array of long‐ and short‐chain PFAAs, but struggle to treat the shortest chain PFAAs and removal of most PFAA precursors has not been evaluated;
• Ozofractionation has been applied for PFASs at full scale and shown to be effective for removal of total PFASs;
• Chemical oxidation has been demonstrated to be potentially applicable for some PFAAs, but when applied in situ there is concern over the formation of shorter chain PFAAs and ongoing rebound from sorbed precursors;
• Electrochemical oxidation is evolving as a destructive technology for many PFASs, but can create undesirable by‐products such as perchlorate and bromate;
• Sonolysis has been demonstrated as a potential destructive technology in the laboratory but there are significant challenges when considering scale up;
• Soils stabilization approaches are evolving and have been used at full scale but performance need to be assessed using appropriate testing regimes;
• Thermal technologies to treat PFAS‐impacted soils show promise but elevated temperatures (potentially >500 °C) may be required for treatment.

There are a plethora of technologies evolving to manage PFASs but development is in its early stage, so there are opportunities for much ingenuity.     

Does ‘Manna from Heaven’ help? The role of cash transfers in disaster recovery—lessons from Fiji after Tropical Cyclone Winston

This paper contributes to the evidence on the effectiveness of shock-responsive social protection systems in helping affected households recover from the negative consequences of disasters. It evaluates the influence of the top-up cash transfers provided by the Government of Fiji to poor households in the wake of Tropical Cyclone Winston, which struck the Pacific Island country on 20 February 2016. The impact evaluation strategy incorporates a sharp regression discontinuity design to define treatment and control groups, based on the eligibility threshold of the poverty benefit scheme. The results indicate that treatment households—that is, those that received cash transfers—are significantly more likely to report quicker recovery from various shocks. Female-headed households are more likely to recover from the ramifications, whereas households with older heads are less likely to do so. The presence of a functioning market appears to be a major factor aiding the speed of recovery. Finally, the evidence points towards strong district effects on recovery.     

Spatial and temporal variability of outdoor coarse particulate matter mass concentrations measured with a new coarse particle sampler during the Detroit Exposure and Aerosol Research Study

The Detroit Exposure and Aerosol Research Study (DEARS) provided data to compare outdoor residential coarse particulate matter (PM_10–2.5) concentrations in six different areas of Detroit with data from a central monitoring site. Daily and seasonal influences on the spatial distribution of PM_10–2.5 during Summer 2006 and Winter 2007 were investigated using data collected with the newly developed coarse particle exposure monitor (CPEM). These data allowed the representativeness of the community monitoring site to be assessed for the greater Detroit metro area. Multiple CPEMs collocated with a dichotomous sampler determined the precision and accuracy of the CPEM PM_10–2.5 and PM_2.5 data.CPEM PM_2.5 concentrations agreed well with the dichotomous sampler data. The slope was 0.97 and the R² was 0.91. CPEM concentrations had an average 23% negative bias and R² of 0.81. The directional nature of the CPEM sampling efficiency due to bluff body effects probably caused the negative CPEM concentration bias.PM_10–2.5 was observed to vary spatially and temporally across Detroit, reflecting the seasonal impact of local sources. Summer PM_10–2.5 was 5 μg m^?3 higher in the two industrial areas near downtown than the average concentrations in other areas of Detroit. An area impacted by vehicular traffic had concentrations 8 μg m^?3 higher than the average concentrations in other parts of Detroit in the winter due to the suspected suspension of road salt. PM_10–2.5 Pearson Correlation Coefficients between monitoring locations varied from 0.03 to 0.76. All summer PM_10–2.5 correlations were greater than 0.28 and statistically significant (p-value < 0.05). Winter PM_10–2.5 correlations greater than 0.33 were statistically significant (p-value < 0.05). The PM_10–2.5 correlations found to be insignificant were associated with the area impacted by mobile sources during the winter. The suspected suspension of road salt from the Southfield Freeway, combined with a very stable atmosphere, caused concentrations to be greater in this area compared to other areas of Detroit. These findings indicated that PM_10–2.5, although correlated in some instances, varies sufficiently across a complex urban airshed that that a central monitoring site may not adequately represent the population's exposure to PM_10–2.5.     

Investigations on the effect of chlorine in lubricating oil and the presence of a diesel oxidation catalyst on PCDD/F releases from an internal combustion engine

This paper reports on an intensive study into releases of polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated furans (PCDF) and polychlorinated biphenyls (PCB) from a diesel engine and the analysis of PCDD/F and PCB in crankcase lubricating oil. Experimental conditions were set and carefully controlled in order to maximize the possible impact of, and our ability to measure the effect of, changes in the levels of chlorine in the lubricant. Emissions to air were measured using modified EPA methods following the principles of the European EN 1948 standards. A series of 40 experimental runs were completed using three reference lubricants formulated to have three levels of chlorine present as a residual component (at levels of 12, 131 and 259 mg kg(-1) or ppm). The engine was run with and without the diesel oxidation catalyst. All lubricants were realistic oils and the use of unrealistic additives or doping of components - particularly chlorine - in the fuel and lubricant was carefully avoided. Analysis of fuel and lubricant (before and after testing) samples required strenuous attention to achieve acceptable recoveries and showed non-detectable levels of PCB and PCDD/F at a detection limit of around 1.5 ng I-TEQ kg(-1) (ppt), indistinguishable from the laboratory blank. The testing demonstrated the need for extreme care to be taken in developing measurement methods that are sufficiently sensitive for measuring chlorine content of fluids and PCDD/F in oils, the latter being particularly challenging. Mean emissions of PCDD/F with the diesel oxidation catalyst in place were 23 pg I-TEQ l(-1) of fuel and with the diesel oxidation catalyst removed 97 pg I-TEQ l(-1) of fuel. The results of this testing showed that the emissions of PCDD/F were greatly reduced by the presence of a diesel oxidation catalyst in the exhaust, a finding that has not been explicitly tested in previous work. They also show that emissions from the engine were not controlled by the level of chlorine in the lubricant and that emissions did not change in response to a much greater step change in the total chlorine entering the combustion chamber due to a change in the level of chlorine in the fuel. Emissions when the engine was configured with a diesel oxidation catalyst showed a consistent pattern that appears to be unique in the experience of the authors.     

Evaluation of the in-situ aerobic cometabolism of chlorinated ethenes by toluene-utilizing microorganisms using push-pull tests

A series of transport, biostimulation, and activity push-pull tests were performed under induced and natural gradient conditions in a trichloroethene (TCE) and cis-dichloroethene (c-DCE) contaminated aquifer. Transport tests demonstrated the feasibility of injecting and recovering complex solute mixtures from the aquifer. During the biostimulation tests, decreases in toluene concentration and the production of o-cresol as an intermediate oxidation product indicated the presence of toluene-utilizing microorganisms. Activity tests demonstrated that the stimulated microbial community had the ability to transform injected c-DCE and trans-dichloroethene (t-DCE) at similar zero-order rates. Injected isobutene was oxidized to isobutene oxide, which indicated that a toluene ortho-monooxygenase enzyme system was likely responsible for the observed c-DCE and t-DCE transformations. c-DCE zero-order transformation rates in drift push-pull tests were similar to those obtained from traditional push-pull tests (about 0.1 microM/h). Analysis of drift test data using first-order kinetic analysis resulted in similar conclusions as those obtained using zero-order kinetic analyses. When 1-butyne, an inhibitor of toluene ortho-monooxygenase, was added to injected test solutions, the oxidation of toluene, and the transformation of isobutene, c-DCE, and t-DCE were inhibited. The results illustrate how a series of push-pull tests can be used in combination to detect, quantify and confirm in-situ cometabolic microbial transformations.     

Halogenated organic contaminants and mercury in northern fulmars (Fulmarus glacialis): levels, relationships to dietary descriptors and blood to liver comparison

The northern fulmar (Fulmarus glacialis) is an interesting candidate for the study of patterns and levels of halogenated organic contaminants (HOCs) since they accumulate high levels of certain HOCs. In the present study we characterized a suite of established and novel HOCs in northern fulmars breeding on Bj?rn?ya in the Norwegian Arctic. A comparison between blood and liver HOC levels was made, and the levels were related to the ratios of heavier to lighter stable isotopes of nitrogen (15)N/(14)N (delta(15)N) and carbon (13)C/(12)C (delta(13)C) in muscle. A significant difference in congener patterns between blood and liver was found. The delta(13)C was not related to HOCs, neither in liver nor in blood. Weak correlations were found between delta(15)N and liver HOC levels. The 2,3,7,8-tetrachlorodibenzo-p-dioxin toxic equivalents (TEQs) in northern fulmars were well above thresholds for reproductive effects in seabirds.