Trialling a web-based spatial information management tool with Land Managers in Victoria,Australia

A prototype web-based spatial information management tool (called eFarmer) was tested for its useability and usefulness by 46 Land Managers and 5 extension staff in Victoria, Australia. Participants had a range of enterprises (dairy, beef/sheep grazing, cropping, lifestyle land use), property sizes and computer ownership and expertise. A follow up study was conducted with 12 dairy farmers, where features regarding assessment of nutrient losses from paddocks (Farm Nutrient Loss Index, FNLI) were added to eFarmer. Over 27,000 maps (including 11,000 with aerial photography) were accessed by Land Managers during a 5-month trial period. Despite limited training and support, 1350 people are registered users, and approximately 700 have actively used the tool. Reasons for the success include providing improved access to spatial information, enabling measurement of farm features and creation of farm maps, providing a basis for decision-making about farm inputs, support for better farm and landscape scale action planning and production and Land Managers being able to seek management advice from the extension staff who facilitated eFarmer testing programs. For dairy farmers in the FNLI trial, awareness of off-site impacts increased and most changed management practices. Provision of on-going training and support will be at least as important as further development of the tool itself. Web-based spatial information tools have potential to improve the awareness of Land Managers about their environmental impacts and influence their decision-making. Access to spatial information has potential to reduce information asymmetry between Land Managers, extension staff and catchment planners in a constructive way. It will also change the role of extension staff away from being an expert with answers, to a facilitator enabling learning. Results have applicability in countries where there is a high level of farm computer ownership, relevant spatial information is available in GIS format, where governments are happy to make spatial information available to the public and there is pressure for increased environmental awareness and improved decision making by Land Managers.     

Nitrogen oxides emissions from the MILD combustion with the conditions of recirculation gas

The nitrogen oxides (NO_x) reduction technology by combustion modification which has economic benefits as a method of controlling NO_x emitted in the combustion process, has recently been receiving a lot of attention. Especially, the moderate or intense low oxygen dilution (MILD) combustion which applied high temperature flue gas recirculation has been confirmed for its effectiveness with regard to solid fuel as well. MILD combustion is affected by the flue gas recirculation ratio and the composition of recirculation gas, so its NO_x reduction efficiency is determined by them. In order to investigate the influence of factors which determine the reduction efficiency of NO_x in MILD coal combustion, this study changed the flow rate and concentration of nitrogen (N₂), carbon dioxide (CO₂) and steam (H₂O) which simulate the recirculation gas during the MILD coal combustion using our lab-scale drop tube furnace and performed the combustion experiment. As a result, its influence by the composition of recirculation gas was insignificant and it was shown that flue gas recirculation ratio influences the change of NO_x concentration greatly. Implications: We investigated the influence of factors determining the nitrogen oxides (NO_x) reduction efficiency in MILD coal combustion, which applied high-temperature flue gas recirculation. Using a lab-scale drop tube furnace and simulated recirculation gas, we conducted combustion testing changing the recirculation gas conditions. We found that the flue gas recirculation ratio influences the reduction of NO_x emissions the most.     

Oyster shell as substitute for aggregate in mortar.

Enormous amounts of oyster shell waste have been illegally disposed of at oyster farm sites along the southern coast of Korea. In this study to evaluate the possibility of recycling this waste for use as a construction material, the mechanical characteristics of pulverized oyster shell were investigated in terms of its potential utilization as a substitute for the aggregates used in mortar. The unconfined compressive strengths of various soil mortar specimens, with varying blending ratios of cement, water and oyster shell, were evaluated by performing unconfined compression tests, and the results were compared with the strengths of normal cement mortar made with sand. In addition, the effect of organic chemicals on the hardening of concrete was evaluated by preparing ethyl-benzene-mixed mortar specimens. The long-term strength improvement resulting from the addition of fly ash was also examined by performing unconfined compression tests on specimens with fly-ash content. There was no significant reduction in the compressive strength of the mortars containing small oyster shell particles instead of sand. From these test data, the possible application of oyster shells in construction materials could be verified, and the change in the strength parameters according to the presence of organic compounds was also evaluated.     

Assessment of Future Climate Change Impact on Water Quality of Chungju Lake,South Korea,Using WASP Coupled with SWAT

This study is to evaluate the future potential impact of climate change on the water quality of Chungju Lake using the Water Quality Analysis Simulation Program (WASP). The lake has a storage capacity of 2.75 Gm³, maximum water surface of 65.7 km², and forest‐dominant watershed of 6,642 km². The impact on the lake from the watershed was evaluated by the Soil and Water Assessment Tool (SWAT). The WASP and SWAT were calibrated and validated using the monthly water temperatures from 1998 to 2003, lake water quality data (dissolved oxygen, total nitrogen [T‐N], total phosphorus [T‐P], and chlorophyll‐a [chl‐a]) and daily dam inflow, and monthly stream water quality (sediment, T‐N, and T‐P) data. For the future climate change scenario, the MIROC3.2 HiRes A1B was downscaled for 2020s, 2050s, and 2080s using the Change Factor statistical method. The 2080s temperature and precipitation showed an increase of +4.8°C and +34.4%, respectively, based on a 2000 baseline. For the 2080s watershed T‐N and T‐P loads of up to +87.3 and +19.6%, the 2080s lake T‐N and T‐P concentrations were projected to be 4.00 and 0.030 mg/l from 2.60 and 0.016 mg/l in 2000, respectively. The 2080s chl‐a concentration in the epilimnion and the maximum were 13.97 and 52.45 μg/l compared to 8.64 and 33.48 μg/l in 2000, respectively. The results show that the Chungju Lake will change from its mesotrophic state of 2000 to a eutrophic state by T‐P in the 2020s and by chl‐a in the 2080s. Editor's note: This paper is part of a featured series on Korean Hydrology. The series addresses the need for a new paradigm of river and watershed management for Korea due to climate and land use changes.     

Emergy evaluation perspectives of a multipurpose dam proposal in Korea

The 'emergy' concept was used to evaluate the economy of Korea and the contributions of a multipurpose dam proposal to the real wealth of the Korean economy. Emergy is defined as the available energy of one kind previously used up directly and indirectly to make a product or service. The indices for Korea calculated from the emergy evaluation were close to those of developed countries. Even though its monetary balance of payments was negative in 1997, the economy of Korea showed positive balance in trade when exports and imports were expressed in emergy. The emergy evaluation showed that the Korean economy places a large stress on its environment. Water supply and generation of electricity were the most important contributions of the proposed dam in terms of emergy; 46.5 and 45.1% of the total benefit, respectively. Flood control contributed 8.4% of the total benefit. Major costs associated with the proposed dam were from sediments (33.2% of the total cost), construction services (22.8%), and social disruption of the region (21.6%). In terms of emergy, the ratio of benefits to costs of the proposed dam was 2.78 if sediments are not included, and 1.86 if sediments are included, which result in more benefits than costs in both cases. The benefit to cost ratio of the dam was larger than that of the current system (1.42) without the dam whether sediments are included in the total cost or not. The environmental stress of the proposed dam was considerably lower than that of the Korean economy, but the dam might increase stress on local environment.     

Trisomy 20 mosaicism confirmed in a phenotypically normal liveborn

Prenatal diagnosis of trisomy 20 mosaicism in this case was based on cytogenetic analysis of cultured amniotic fluid cells (23/52 cells were trisomy 20 representing cells from each of four primary cultures). The pregnancy continued to term and the mosaicism was confirmed in the phenotypically normal male neonate by analysis of cultured foreskin fibroblasts (7/49 cells + 20) and placental cells 20/20 cells + 20) whereas the peripheral lymphocytes were cytogenetically normal (20/20 cells were 46,XY). This represents the first confirmation of trisomy 20 mosaicism in a phenotypically normal full-term neonate.     

Pesticide decontamination from fabric by laundering and simulated weathering

This laboratory study investigated the effectiveness of selected detergents and the phenomenon of simulated environmental conditions (weathering) on the removal of a commercial-grade mixture of parathion and methyl parathion from a three-layer laminated fabric. The weathering treatment consisted of exposure and non-exposure to simulated environmental conditions of heat, light, and humidity. Contaminated fabric samples were laundered in one of three detergents containing an anionic, a nonionic, and a combined anionic and nonionic surfactant. The test fabric, a three-layer fabric containing an impermeable microporous film laminated between two layers of nylon, was pipette-contaminated with 400 microliters of field strength pesticide solution and allowed to dry. Half of the contaminated samples were weathered in an Atlas Fade-Ometer. All of the contaminated samples were subsequently laundered in a Launder-Ometer. Percent of pesticide residue was determined by gas chromatography. Weathering did significantly reduce both parathion and methyl parathion residues remaining in the test fabric. No statistically significant difference was found among the three detergents. High amounts of both parathion and methyl parathion remained in the test fabric after weathering and laundry treatments. Before the test fabric can be recommended for use in protective garments further research is needed to develop more effective decontamination procedures.     

Corrosion behavior of glass and glass-ceramics made of municipal solid waste incinerator fly ash

Glasses and glass-ceramics were prepared by melting municipal solid waste (MSW) incinerator fly ash and their corrosion properties were evaluated. Corrosion of both materials proceeded in two different steps. At the initial stage, the corrosion process is a diffusion-controlled process. After approximately 10 h at the initial stage, weight losses increased linearly with time due to the total dissolution of glasses or glass-ceramics. Leaching of heavy metals from glasses and glass-ceramics were well within international environmental regulations. Corrosion proceeded uniformly in fly ash glass while Na2CaSiO4 crystalline phase was preferentially dissolved in the glass-ceramics.     

Operational Atmospheric Modeling System CARIS for Effective Emergency Response Associated with Hazardous Chemical Releases in Korea

The Chemical Accidents Response Information System (CARIS) was developed at the Center for Chemical Safety Management in South Korea in order to track and predict the dispersion of hazardous chemicals in the case of an accident or terrorist attack involving chemical companies. The main objective of CARIS is to facilitate an efficient emergency response to hazardous chemical accidents by rapidly providing key information in the decision-making process. In particular, the atmospheric modeling system implemented in CARIS, which is composed of a real-time numerical weather forecasting model and an air pollution dispersion model, can be used as a tool to forecast concentrations and to provide a wide range of assessments associated with various hazardous chemicals in real time.This article introduces the components of CARIS and describes its operational modeling system. Some examples of the operational modeling system and its use for emergency preparedness are presented and discussed. Finally, this article evaluates the current numerical weather prediction model for Korea.Published online