Characteristics of carbonized sludge for co-combustion in pulverized coal power plants

Co-combustion of sewage sludge can destabilize its combustion profile due to high volatility, which results in unstable flame. We carried out fuel reforming for sewage sludge by way of carbonization at pyrolysis temperature of 300-500 °C. Fuel characteristics of carbonized sludge at each temperature were analyzed. As carbonization temperature increased, fuel ratio increased, volatile content reduced, and atomic ratio relation of H/C and O/C was similar to that of lignite. The analysis result of FT-IR showed the decrease of aliphatic C-H bond and O-C bond in carbonization. In the analysis result of TG-DTG, the thermogravimetry reduction temperature of carbonized sludge (CS400) was proven to be higher than that of dried sludge, but lower than that of sub-bituminous coal. Hardgrove grindability index increased in proportion to fuel ratio increase, where the carbonized sludge value of 43-110 was similar or higher than the coal value of 49-63. As for ash deposits, slagging and fouling index were higher than that of coal. When carbonized sludge (CS400) and coal were co-combusted in 1-10% according to calorific value, slagging tendency was low in all conditions, and fouling tendency was medium or high according to the compositions of coal.     

Indoor air quality differences between urban and rural preschools in Korea

Background, aims, and scope

Preschool indoor air quality (IAQ) is believed to be different from elementary school or higher school IAQ and preschool is the first place for social activity. Younger children are more susceptible than higher-grade children and spend more time indoors. The purpose of this study was to compare the indoor air quality by investigating the concentrations of airborne particulates and gaseous materials at preschools in urban and rural locations in Korea.

Methods

We investigated the concentrations of airborne particulates and gaseous materials in 71 classrooms at 17 Korean preschools. For comparison, outdoor air was sampled simultaneously with indoor air samples. Airborne concentrations of total suspended particulates, respirable particulates, lead, asbestos, total volatile organic compounds and components, formaldehyde, and CO₂ were measured with National Institute for Occupational Safety and Health and/or Environmental Protection Agency analytical methods.

Results

The concentration profiles of the investigated pollutants in indoor and urban settings were higher than those in outdoor and rural areas, respectively. The ratios of indoor/outdoor concentrations (I/O) of particulates and gaseous pollutants were characterized in urban and rural preschools. Total dust concentration was highest in urban indoor settings followed by urban outdoor, rural indoor, and rural outdoor locations with an I/O ratio of 1.37 in urban and 1.35 in rural areas. Although I/O ratios of lead were close to 1, lead concentrations were much higher in urban than in rural areas. The I/O ratio of total VOCs was 2.29 in urban and 2.52 in rural areas, with the highest level in urban indoor settings. The I/O ratio of formaldehyde concentrations was higher in rural than in urban areas because the outdoor rural level was much lower than the urban concentration. Since an I/O ratio higher than 1 implies the presence of indoor sources, we concluded that there are many indoor sources in preschools.

Conclusions

We confirmed that pollutants in indoor and urban settings were higher than those in outdoor and rural areas, respectively. Preschool children are expected to spend more time inside preschool facilities and therefore to be more exposed to pollutants. As far as we know, preschool IAQ is different from elementary school or higher school IAQ. Also, they are more vulnerable than higher-grade children. We found that the indoor and urban concentration profiles of the studied pollutants in preschools were higher than those in outdoor and rural areas. We believe that our findings may be useful for understanding the potential health effects of exposure and intervention studies in preschools.     

Asian dust events observed by a 20-m monitoring tower in Mongolia during 2009

A 20-m Asian dust monitoring tower was installed at Erdene in Dornogobi, Mongolia in later 2008, which is one of the high Asian dust source regions in the Asian domain, to investigate meteorological conditions for the dust events. The tower was equipped with meteorological sensors (temperature, humidity and wind speed at four levels, precipitation and pressure near the surface), radiation sensors (solar radiation, net radiation) and soil measurement sensors (soil moisture and soil temperature at three levels and soil heat flux at one level) and turbulent measurement (sonic anemometer) at the 8 m height and PM₁₀ concentration measurement (beta guage) at the 3 m height. Measurement was made for a full year of 2009. The observed data indicated that dust events occur all year round with the maximum hourly mean maximum concentration of 4107 μg m^?3 in the early May to a minimum of 92 μg m^?3 in later August. It was found that the dust concentration at this site is directly related to the wind speed exceeding the threshold wind speed (likewise the corresponding friction velocity) during the winter to early spring. However, the observed dust concentration is not only related to the wind speed exceeding the threshold wind speed but also to the Normalized Difference Vegetation Index (NDVI) during the late spring to the late autumn due to the growth of vegetation. It was also found that the surface soil moisture content does not affect the dust concentration due to the relatively short residence time of the soil moisture in the surface soil. The presently monitored data can be used to verify parameters used in the Asian Dust Aerosol Model (ADAM) that is the operational forecasting dust model in the Korea Meteorological Administration (KMA).     

ESTIMATION OF POTENTIAL REDUCTIONS IN RECREATIONAL BENEFITS DUE TO SEDIMENTATION1

ABSTRACT: A travel cost model is developed to estimate the potential reductions in recreational benefits from sedimentation in Reelfoot Lake in northwestern Tennessee. In addition to the consumer surplus estimates generated by the model, three other aspects of the study were significant. First, the study applied a relatively untested methodology for deriving the opportunity cost of travel time. The study resulted in a value that is less than one-half of the Water Resource Council's “one-third of the wage rate” rule-of-thumb. Second, water quality perceptions were unsuccessfully incorporated into the model as a demand shifter. This raised questions as to the appropriate manner in which perceptions could be included in a travel cost model. Finally, a simple methodology was outlined by which estimates of the recreational value of Reelfoot Lake could be used to suggest how much cost could be justified for soil erosion control on agricultural land surrounding the lake.     

Estimation of the shadow prices of pollutants with production/environment inefficiency taken into account: a nonparametric directional distance function approach

This paper deals with the estimation of the shadow prices of pollutants with a nonparametric directional distance function approach, where the inefficiency involved in the production process is taken into account unlike the previous studies. The directional vector, which is critical to the estimation and subject to the criterion for an appropriate efficiency rule proposed here, is calculated by using the annual plans of power plants in terms of production and environment. In the empirical study for Korea's electric power industry during the period of 1990-1995, we find that the average shadow prices of sulfur oxides (SOx), nitrogen oxides (NOx), and total suspended particulates (TSP) are approximately 10% lower than those calculated under the assumption of full efficiency. The methodology we propose and the findings obtained in the empirical study allow us to undertake better decision-making over a broad range of environmental policy issues.     

APPLICATION OF GREY MODEL AND ARTIFICIAL NEURAL NETWORKS TO FLOOD FORECASTING1

The main focus of this study was to compare the Grey model and several artificial neural network (ANN) models for real time flood forecasting, including a comparison of the models for various lead times (ranging from one to six hours). For hydrological applications, the Grey model has the advantage that it can easily be used in forecasting without assuming that forecast storm events exhibit the same stochastic characteristics as the storm events themselves. The major advantage of an ANN in rainfall‐runoff modeling is that there is no requirement for any prior assumptions regarding the processes involved. The Grey model and three ANN models were applied to a 2,509 km² watershed in the Republic of Korea to compare the results for real time flood forecasting with from one to six hours of lead time. The fifth‐order Grey model and the ANN models with the optimal network architectures, represented by ANN1004 (34 input nodes, 21 hidden nodes, and 1 output node), ANN1010 (40 input nodes, 25 hidden nodes, and 1 output node), and ANN1004T (14 input nodes, 21 hidden nodes, and 1 output node), were adopted to evaluate the effects of time lags and differences between area mean and point rainfall. The Grey model and the ANN models, which provided reliable forecasts with one to six hours of lead time, were calibrated and their datasets validated. The results showed that the Grey model and the ANN1010 model achieved the highest level of performance in forecasting runoff for one to six lead hours. The ANN model architectures (ANN1004 and ANN1010) that used point rainfall data performed better than the model that used mean rainfall data (ANN1004T) in the real time forecasting. The selected models thus appear to be a useful tool for flood forecasting in Korea.