Halton iterative partitioning: spatially balanced sampling via partitioning

A new spatially balanced sampling design for environmental surveys is introduced, called Halton iterative partitioning (HIP). The design draws sample locations that are well spread over the study area. Spatially balanced designs are known to be efficient when surveying natural resources because nearby locations tend to be similar. The HIP design uses structural properties of the Halton sequence to partition a resource into nested boxes. Sample locations are then drawn from specific boxes in the partition to ensure spatial diversity. The method is conceptually simple and computationally efficient, draws spatially balanced samples in two or more dimensions and uses standard design-based estimators. Furthermore, HIP samples have an implicit ordering that can be used to define spatially balanced over-samples. This feature is particularly useful when sampling natural resources because we can dynamically add spatially balanced units from the over-sample to the sample as non-target or inaccessible units are discovered. We use several populations to show that HIP sampling draws spatially balanced samples and gives precise estimates of population totals.     

Business recovery: an assessment framework

This paper presents a Business Recovery Assessment Framework (BRAF) to help researchers and practitioners design robust, repeatable, and comparable studies of business recovery in various post‐disruption contexts. Studies assessing business recovery without adequately considering the research aims, recovery definitions, and indicators can produce misleading findings. The BRAF is composed of a series of steps that guide the decisions that researchers need to make to ensure: (i) that recovery is indeed being measured; (ii) that the indicators of recovery that are selected align with the objectives of the study and the definition of recovery; and, where necessary, (iii) that appropriate comparative control variables are in place. The paper draws on a large dataset of business surveys collected following the earthquakes in Canterbury, New Zealand, on 4 September 2010 and 22 February 2011 to demonstrate the varied conclusions that different recovery indicators can produce and to justify the need for a systematic approach to business recovery assessments.     

Offspring sex ratios reflect lack of repayment by auxiliary males in a cooperatively breeding passerine

The repayment hypothesis posits that primary sex ratios in cooperative species should be biased towards the helping sex because these offspring “repay” a portion of their cost through helping behavior and therefore are less expensive to produce. However, many cooperatively breeding birds and mammals do not show the predicted bias in the primary sex ratio. Recent theoretical work has suggested that the repayment hypothesis should only hold when females gain a large fitness advantage from the presence of auxiliary adults in the group. When auxiliaries provide little or no fitness advantage, competition between relatives should lead to sex ratios biased towards the dispersing (non-helping) sex. We examined the benefits auxiliaries provide to females and corresponding offspring sex ratios in the red-backed fairy-wren (Malurus melanocephalus), a cooperatively breeding Australian bird with male auxiliary helpers. We found that auxiliaries provide little or no benefit to female reproductive success or survival. As predicted, the population primary sex ratio was biased towards daughters, the dispersing sex, and females with auxiliaries produced female-biased broods whereas females without auxiliaries produced unbiased broods. Moreover, offspring sex ratios were more strongly biased toward females in years when auxiliaries were more common in the population. These results suggest that offspring sex ratios are associated with competition among the non-dispersing sex in this species, and also that females may use cues to assess local breeding opportunities for their offspring.     

Tasmanian landowner preferences for conservation incentive programs: a latent class approach

An empirical model of landowners' conservation incentive program choice is developed in which information about landowners' socio-economic and property characteristics and their attitudes, is combined with incentive program attributes. In a Choice survey landowners were presented with the choice of two incentive programs modelled as 'bundles of attributes' mimicking a voluntary choice scenario. Landowner behaviour and decision and the type of conditions and regulations they preferred were analyzed. Based on choice survey data, landowner heterogeneity was accounted for using a latent class approach to estimate the preference parameters. Three latent classes of landowners with different attitudes to the role and outcome of establishing conservation reserves on private land were identified: multi-objective owners; environment owners; and production owners. Only a small proportion of landowners, mostly environment owners, would voluntarily join a program. Although compensation funding contributed to voluntary program choice for multi-objective owners and environment owners, welfare losses were around 4000 AUD per hectare, which is less than the average agricultural land value in Tasmania. Landowners for whom compensation funding contributed to voluntary program choice were also most likely to set aside land for conservation without payment. This raises the possibility that the government's compensation expenditure could potentially be either reduced or re-allocated to landowners who will not voluntarily take conservation action. Increasing participation in conservation incentive programs and minimizing the welfare losses associated with meeting conservation targets may be best achieved by offering programs that allow flexibility in terms of legal arrangements and other program attributes.     

Evolution of a stream ecosystem in recently deglaciated terrain

Climate change and associated glacial recession create new stream habitat that leads to the assembly of new riverine communities through primary succession. However, there are still very few studies of the patterns and processes of community assembly during primary succession for stream ecosystems. We illustrate the rapidity with which biotic communities can colonize and establish in recently formed streams by examining Stonefly Creek in Glacier Bay, Alaska (USA), which began to emerge from a remnant glacial ice mass between 1976 and 1979. By 2002, 57 macroinvertebrate and 27 microcrustacea species had become established. Within 10 years of the stream's formation, pink salmon and Dolly Varden charr colonized, followed by other fish species, including juvenile red and silver salmon, Coast Range sculpin, and sticklebacks. Stable-isotope analyses indicate that marine-derived nitrogen from the decay of salmon carcasses was substantially assimilated within the aquatic food web by 2004. The findings from Stonefly Creek are compared with those from a long-term study of a similarly formed but older stream (12 km to the northeast) to examine possible similarities in macroinvertebrate community and biological trait composition between streams at similar stages of development. Macroinvertebrate community assembly appears to have been initially strongly deterministic owing to low water temperature associated with remnant ice masses. In contrast, microcrustacean community assembly appears to have been more stochastic. However, as stream age and water temperature increased, macroinvertebrate colonization was also more stochastic, and taxonomic similarity between Stonefly Creek and a stream at the same stage of development was <50%. However the most abundant taxa were similar, and functional diversity of the two communities was almost identical. Tolerance is suggested as the major mechanism of community assembly. The rapidity with which salmonids and invertebrate communities have become established across an entire watershed has implications for the conservation of biodiversity in freshwater habitats.     

Knowledge gain and behavioral change in citizen-science programs

Citizen-science programs are often touted as useful for advancing conservation literacy, scientific knowledge, and increasing scientific-reasoning skills among the public. Guidelines for collaboration among scientists and the public are lacking and the extent to which these citizen-science initiatives change behavior is relatively unstudied. Over two years, we studied 82 participants in a three-day program that included education about non-native invasive plants and collection of data on the occurrence of those plants. Volunteers were given background knowledge about invasive plant ecology and trained on a specific protocol for collecting invasive plant data. They then collected data and later gathered as a group to analyze data and discuss responsible environmental behavior with respect to invasive plants. We tested whether participants without experience in plant identification and with little knowledge of invasive plants increased their knowledge of invasive species ecology, participation increased knowledge of scientific methods, and participation affected behavior. Knowledge of invasive plants increased on average 24%, but participation was insufficient to increase understanding of how scientific research is conducted. Participants reported increased ability to recognize invasive plants and increased awareness of effects of invasive plants on the environment, but this translated into little change in behavior regarding invasive plants. Potential conflicts between scientific goals, educational goals, and the motivation of participants must be considered during program design.     

Monitoring and adaptive management: resolving social and organisational issues to improve information sharing in natural resource management

Adaptive, or 'learning by doing', approaches are often advocated as a means of providing increased understanding within natural resource management. However, a number of organisational and social issues need to be resolved if these approaches are to be used successfully. A case study in the South Island high country of New Zealand is used to review what is needed to support an ongoing community-based monitoring and adaptive management programme. First, the case study is described, paying attention to the social context of the resource management problem. The results of a workshop that explored this problem are then outlined, along with a proposed information flow suggested by participants. Requirements for future steps to resolve these problems (such as information protocols and a multi-stakeholder information system) are discussed. Finally, some broad lessons are drawn from this exercise that could help others developing similar approaches.     

Protection Against Dust by Respirators

This article is a brief review of the mechanism of action of fibrous filters and of the performance of respirators; it neglects many of the complications discussed in longer and more detailed articles. An expression is given for the pressure drop across a filter in terms of fibre diameter and filtration velocity. The particle capture mechanisms of interception and diffusional deposition are introduced and the way in which filtration efficiency varies with particle size is discussed. Filters with fibres of small diameter are shown to be the most efficient, but their use can cause problems. Electrically charged materials are widely used in respirators because of their high efficiency and low pressure drop. Types of material, their means of charging, and their method of action are described. An account is given of respirator leakage, the protection factor, and of the way that these may vary in a period of use. The leakage of air and particles through face seal leaks and leaky valves is discussed. The frequent discrepancy in the protection given by respirators in the workplace, on the one hand, and that suggested by laboratory measurements, on the other, is reviewed, and the article ends with an account of the combined effect of aerosol penetration through a filter and through a leak.     

Experimental investigation of hydrogen–air deflagrations and detonations in semi-confined flat layers

This paper presents results of an experimental investigation on the deflagration and deflagration-to-detonation transition (DDT) in an obstructed (blockage ratio BR = 50%), semi-confined flat layer filled with uniform hydrogen–air mixtures. The effect of mixture reactivity depending on flat layer thickness and its width is studied to evaluate the critical conditions for sonic flame propagation and the possibility for detonation onset. The experiments were performed in a transparent, rectangular channel with a length of 2.5 m. The flat layer thickness was varied from 0.06 to 0.24 m and the experiments were performed for different channel widths of 0.3, 0.6 and 0.9 m. The experimental results show flame velocity vs. hydrogen concentration for different thicknesses and widths of the semi-confined flat layer. Three different flame propagation regimes were observed: slow subsonic flame (M << 1), sonic deflagration (M ～ 1) and detonation (M >> 1). It is shown that flame acceleration (FA) to sonic speed is independent of the width of the flat layer. The critical expansion ratio for effective flame acceleration to sonic speed was found to be linearly dependent on the reciprocal layer thickness.