A compilation of field surveys on gaseous elemental mercury (GEM) from contrasting environmental settings in Europe,South America,South Africa and China: separating fads from facts

Mercury is transported globally in the atmosphere mostly in gaseous elemental form (GEM, \( {\text{Hg}}_{\text{gas}}^{0} \) ), but still few worldwide studies taking into account different and contrasted environmental settings are available in a single publication. This work presents and discusses data from Argentina, Bolivia, Bosnia and Herzegovina, Brazil, Chile, China, Croatia, Finland, Italy, Russia, South Africa, Spain, Slovenia and Venezuela. We classified the information in four groups: (1) mining districts where this contaminant poses or has posed a risk for human populations and/or ecosystems; (2) cities, where the concentration of atmospheric mercury could be higher than normal due to the burning of fossil fuels and industrial activities; (3) areas with natural emissions from volcanoes; and (4) pristine areas where no anthropogenic influence was apparent. All the surveys were performed using portable LUMEX RA-915 series atomic absorption spectrometers. The results for cities fall within a low GEM concentration range that rarely exceeds 30 ng m^?3, that is, 6.6 times lower than the restrictive ATSDR threshold (200 ng m^?3) for chronic exposure to this pollutant. We also observed this behavior in the former mercury mining districts, where few data were above 200 ng m^?3. We noted that high concentrations of GEM are localized phenomena that fade away in short distances. However, this does not imply that they do not pose a risk for those working in close proximity to the source. This is the case of the artisanal gold miners that heat the Au–Hg amalgam to vaporize mercury. In this respect, while GEM can be truly regarded as a hazard, because of possible physical–chemical transformations into other species, it is only under these localized conditions, implying exposure to high GEM concentrations, which it becomes a direct risk for humans.     

Arsenic partitioning among particle-size fractions of mine wastes and stream sediments from cinnabar mining districts

Tailings from abandoned mercury mines represent an important pollution source by metals and metalloids. Mercury mining in Asturias (north-western Spain) has been carried out since Roman times until the 1970s. Specific and non-specific arsenic minerals are present in the paragenesis of the Hg ore deposit. As a result of intensive mining operations, waste materials contain high concentrations of As, which can be geochemically dispersed throughout surrounding areas. Arsenic accumulation, mobility and availability in soils and sediments are strongly affected by the association of As with solid phases and granular size composition. The objective of this study was to examine phase associations of As in the fine grain size subsamples of mine wastes (La Soterraña mine site) and stream sediments heavily affected by acid mine drainage (Los Rueldos mine site). An arsenic-selective sequential procedure, which categorizes As content into seven phase associations, was applied. In spite of a higher As accumulation in the finest particle-size subsamples, As fractionation did not seem to depend on grain size since similar distribution profiles were obtained for the studied granulometric fractions. The presence of As was relatively low in the most mobile forms in both sites. As was predominantly linked to short-range ordered Fe oxyhydroxides, coprecipitated with Fe and partially with Al oxyhydroxides and associated with structural material in mine waste samples. As incorporated into short-range ordered Fe oxyhydroxides was the predominant fraction at sediment samples, representing more than 80 % of total As.     

Influence of construction and demolition waste management on the environmental impact of buildings

The purpose of this study is to quantify comparable environmental impacts within a Life Cycle Analysis (LCA) perspective, for buildings in which the first (Materials) and last (End of Life) life cycle stages are adjusted to several waste/material management options. Unlike most LCAs, the approach is “top-down” rather than “bottom-up”, which usually involves large amounts of data and the use of specific software applications. This approach is considered appropriate for a limited but expedient LCA designed to compare the environmental impacts of different life cycle options.Present results, based on real buildings measurements and demolition contractor activities, show that shallow, superficial, selective demolition may not result in reduced environmental impacts. Calculations actually show an increase (generally less than 5%) in most impact categories for the Materials and End of Life stages because of extra transportation needs. However, core material separation in demolition operations and its recycling and/or reuse does bring environmental benefits. A reduction of around 77% has been estimated in the climate change impact category, 57% in acidification potential and 81% in the summer smog impact (for the life cycle stages referred).     

Untreated abandoned mercury mining works in a scenic area of Asturias (Spain)

Mercury mining was a large and thriving industry during the last century in Asturias (NW Spain). At Bra?alamosa, mining activity introduced significant quantities of wastes in spoil heaps located close to the mining operations. In these mining wastes, in addition to mercury, high concentrations of other potentially dangerous elements like As have been found. As a consequence, pollution and dereliction of the local environment occurred. This paper focuses on the environmental impact of these old mining operations and describes a preliminary assessment of the extent of contamination. This includes analytical data from systematic sampling of soils, stream sediments, wastes from spoil heaps, water and herbaceous plants in areas affected by mining activities. The potential risk that spoil materials imply for human health and the environment is documented on the basis of the application of EPA Risk Assessment methodology.     

Vegetation dynamics in impounded marshes along the Indian River Lagoon,Florida, USA

Data are presented on the vegetation dynamics of two impounded marshes along the Indian River Lagoon, in east-central Florida, USA. Vegetation in one of the marshes (IRC 12) was totally eliminated by overflooding and by hypersaline conditions (salinities over 100 ppt) that developed there in 1979 after the culvert connecting the marsh with the lagoon was closed. Over 20% recovery of the herbaceous halophytesSalicornia virginica, S. bigelovii, andBatis maritima was observed at that site after the culvert was reopened in 1982, but total cover in the marsh remains well below the original 75%. No recovery of mangroves was observed at this site. The second site (SLC 24), while remaining isolated from the lagoon during much of the study, did not suffer the complete elimination of vegetation experienced at the first site. At this location, mangroves increased in cover and frequency with a concomitant decrease in herbaceous halophytes. Considerable damage to the vegetation was evident at IRC 12 when the impoundment was closed and flooded for mosquito control in 1986. Although the damage was temporary, its occurrence emphasizes the need of planning and constant monitoring and adjustment of management details as conditions within particular marshes change. Storms and hurricanes may be important in promoting a replacement of black mangroves by red mangroves in closed impoundments because the former cannot tolerate pneumatophore submergence for long periods of time. University of Florida-IFAS Journal Series R-00521.     

Trace metal concentrations in hairs of three bat species from an urbanized area in Germany

Metal-contaminated soils and sediments are widespread in urbanized areas due to atmospheric deposition close to emission sources. These metals are bio-available for organisms, e.g., insects, and accumulate in food chains of insectivorous mammals. Especially bats, which live in urban regions and ingest large amounts of food relative to their body mass, are at risk of being poisoned due to the accumulation of trace metals. To determine species-specific trace metal contents in bats from urban environments, hair samples were analyzed by ICP-OES. Observed trace metal concentrations were related to species-specific foraging habitat, prey spectrum and degree of synanthropy. The species studied were Pipistrellus pipistrellus, Myotis daubentonii and Nyctalus noctula. P. pipistrellus showed the highest concentrations of lead and zinc and slightly higher concentrations of cadmium than the other two species, which was related to its high degree of synanthropy with foraging habitat mostly located in cities. In contrast, N. noctula displayed the highest contents of manganese and copper. The reason might be found in its prey spectrum, as N. noctula feeds mainly on beetles that are caught in cultured areas. Trace metal concentrations determined in hair samples of M. daubentonii ranged between the values of P. pipistrellus and N. noctula, probably reflecting an intermediate level of synanthropy. Positive correlations were observed between the concentrations of cadmium and lead and those of manganese and copper. Hair samples from bats are suitable monitoring tools to study trace metal exposure and can be used to determine differences in trace metal levels between species.     

Removal of emerging pollutants in aqueous phase by heterogeneous Fenton and photo-Fenton with Fe2O3-TiO2-clay heterostructures

Environmental Science and Pollution Research - Fe2O3-TiO2-clay heterostructures have been prepared using an organo-bentonite as support, which organophilic character favored the fixation of TiO2....     

Improving the Rheological and Mechanical Properties of Recycled PET Modified by Macromolecular Chain Extenders Synthesized by Controlled Radical Polymerization

In this work, a series of reactive copolymers of glycidyl methacrylate (G), styrene (S) and acrylonitrile (AN), were synthesized through reversible addition-fragmentation chain transfer polymerization and evaluated as macromolecular chain extenders in reactive extrusion of recycled poly(ethylene terephthalate) (rPET). The results obtained indicate that the addition of the reactive copolymers as chain extenders modifies the chain conformation in rPET causing low crystallization rate and low crystallinity. The physical and rheological properties (melt flow and intrinsic viscosity) of chain-extended rPET improved, rendering better processability. rPET modified with polymeric chain extenders shows improved rheological properties (complex viscosity, storage and loss modulus) and also displays higher elongation at break and impact properties as the GMA content in the chain extenders increase.     

Potential of carbon accumulation in no-till soils with intensive use and cover crops in southern Brazil

The area under no-till (NT) in Brazil reached 22 million ha in 2004-2005, of which approximately 45% was located in the southern states. From the 1970s to the mid-1980s, this region was a source of carbon dioxide to the atmosphere due to decrease of soil carbon (C) stocks and high consumption of fuel by intensive tillage. Since then, NT has partially restored the soil C lost and reduced the consumption of fossil fuels. To assess the potential of C accumulation in NT soils, four long-term experiments (7-19 yr) in subtropical soils (Paleudult, Paleudalf, and Hapludox) varying in soil texture (87-760 g kg(-1) of clay) in agroecologic southern Brazil zones (central region, northwest basaltic plateau in Rio Grande Sul, and west basaltic plateau in Santa Catarina) and with different cropping systems (soybean and maize) were investigated. The lability of soil organic matter (SOM) was calculated as the ratio of total organic carbon (TOC) to particulate organic carbon (POC), and the role of physical protection on stability of SOM was evaluated. In general, TOC and POC stocks in native grass correlated closely with clay content. Conversely, there was no clear effect of soil texture on C accumulation rates in NT soils, which ranged from 0.12 to 0.59 Mg ha(-1) yr(-1). The C accumulation was higher in NT than in conventional-till (CT) soils. The legume cover crops pigeon pea [Cajanus cajan (L.) Millsp] and velvet beans (Stizolobium cinereum Piper & Tracy) in NT maize cropping systems had the highest C accumulation rates (0.38-0.59 Mg ha(-1) yr(-1)). The intensive cropping systems also were effective in increasing the C accumulation rates in NT soils (0.25-0.34 Mg ha(-1) yr(-1)) when compared to the double-crop system used by farmers. These results stress the role of N fixation in improving the tropical and subtropical cropping systems. The physical protection of SOM within soil aggregates was an important mechanism of C accumulation in the sandy clay loam Paleudult under NT. The cropping system and NT effects on C stocks were attributed to an increase in the lability of SOM, as evidenced by the higher POC to TOC ratio, which is very important to C and energy flux through the soil.     

Presence, distribution, and origins of polycyclic aromatic hydrocarbons (PAHs) in sediments from Bahía Blanca estuary, Argentina

This paper is the first comprehensive survey of polycyclic aromatic hydrocarbons (PAHs) in coastal sediments in Bahia Blanca, Argentina, and provides useful information on their levels of concentration, composition, and sources of these pollutants. The total concentrations of PAHs ranged from 15 to 10,260 ng g^???1. The highest contents (mean 3,315 ng g^???1) of total PAHs in marine sediments were found in the inner channels of the estuary, while the lower ones (204 ng g^???1) belong to samples collected far away from contamination sources. The global average recorded in this study (1,500 ng g^???1) indicates that the studied area lies within the referenced category of industrialized coastal zones under chronic pollution. The diagenetic PAH contribution was found to be negligible at all sampled locations; however, the calculation of molecular ratios determined an overimposition of pyrolitic PAHs over the petrogenic input. Further, the use of principal components analysis (PCA) clearly separated ring group compounds and enabled the determination of pyrolitic/combustion PAHs dominancy.