Comparison of different methods for extraction of polycyclic aromatic hydrocarbons (PAHs) from Sicilian (Italy) coastal area sediments

This paper describes a work aimed at improving the conditions of an extraction method, coupling GC-MS determination, for the analysis without cleanup phase, of polycyclic aromatic hydrocarbons (PAHs) from sediment samples. The automatic Soxhlet extraction in warm mode (using Extraction System B-811 Standard, Büchi) has demonstrated advantages for automation, reduced extraction time, and lower solvent use than for conventional Soxhlet extraction. Under these conditions, the recoveries are very good as they resulted greater than 85 % and, in most of the cases, near 100 %. The repeatability is also satisfactory (relative standard deviation less than 15 %). The detection limits are also acceptable and ranged from 0.001 to0.01 μg/kg dry weight. Fifty-four sediment samples were collected. The total concentration of the 17 compounds investigated, in samples of sediments collected from three Sicilian coastal areas, expressed as the sum of concentrations, varies from 99 to 11,557 μg/kg of dry matrix; concentrations of total PAHs in the sediments of Cala are two to three times higher than the other stations.     

Noninvasive prenatal diagnosis in a family at risk for Fraser syndrome

The front cover image is based on the Research Letter Noninvasive prenatal diagnosis in a family at risk for Fraser syndrome by Aldesia Provenzano et al., https://doi.org/10.1002/pd.5700 .

     

The new challenges of end-of-life tyres management systems: A Spanish case study

Directive 2008/98/EC released by the European Union represents a significant step forward in all relevant aspects of waste management. Under the already established, extended produced responsibility (EPR) principle, new policies have been enunciated to continuously achieve better overall environmental performance of key products throughout their life phases. This paper discusses how the directive is being articulated in Spain by the main integrated management system (IMS) for end-of-life (EOL) tyres since its creation in 2006. Focusing on the IMS technological, economic and legal aspects, the study provides a global perspective and evaluation of how the IMS is facing the current issues to resolve, the new challenges that have appeared and the management vision for the coming years.     

Environmental analysis of a construction and demolition waste recycling plant in Portugal – Part II: Environmental sensitivity analysis

Part I of this study deals with the primary energy consumption and CO₂eq emissions of a 350 tonnes/h construction and demolition waste (CDW) recycling facility, taking into account incorporated, operation and transportation impacts. It concludes that the generated impacts are mostly concentrated in operation and transportation, and that the impacts prevented through material recycling can be up to one order of magnitude greater than those generated.However, the conditions considered for the plant’s operation and related transportation system may, and very likely will, vary in the near future, which will affect its environmental performance. This performance is particularly affected by the plant’s installed capacity, transportation fuel and input CDW mass. In spite of the variations in overall primary energy and CO₂eq balances, the prevented impacts are always higher than the generated impacts, at least by a factor of three and maybe even as high as 16 times in particular conditions. The analysis indicates environmental performance for variations in single parameters, except for the plant’s capacity, which was considered to vary simultaneously with all the others. Extreme best and worst scenarios were also generated to fit the results into extreme limits.     

Two methods to assess vulnerability to climate change in the Mexican agricultural sector

We applied two methods to assess vulnerability to climate change in Mexico’s agricultural sector. The first one was a principal component analysis (PCA) that weighted each variable separately. For the second one, we integrated the variables in a linear array in which all variables were weighted equally, and then, we used the arithmetic sum of the sub-indices of exposure and sensitivity minus the adaptive capacity to obtain the vulnerability index. We discuss the similarities and differences between two methods with respect to municipal-level maps as the outputs. The application of the method for the agricultural sector in Mexico gave us the spatial distribution of the high- and very-high vulnerability categories, which we propose as a tool for policy. The methods agreed that the very-high vulnerability category is present in 39 municipalities. Also we found that 16 % of the total population in the country is located in high-exposure areas. In addition, 41 % lives in municipalities identified as highly-sensitive. In terms of adaptive capacity, 20 % of the population lives in 1273 municipalities with low-adaptive capacity. Finally, we discuss the need for information regarding vulnerability at the national level to guide policies aimed at reducing exposure and sensitivity and increasing adaptive capacity.     

OPTIMAL MANAGEMENT AND DESIGN OF HYDRAULIC SYSTEMS1

ABSTRACT: A possible methodology is developed to deal with the problem of designing complex pipeline systems, when they are subject to different rates of demand, and when a hypothesis of the flow distribution in different branches is not allowed. The mathematical algorithm used in linear programming. The problem, which is not linear, is dealt with by means of an iterative method; that is, by starting with a possible solution and inserting at each iteration the solution found in the preceding iteration. By taking as variables of the problem the piezometric heads of the ends for each branch of the network, the piezometric gradients and flows, and by thus considering the diameter as a derived variable, it is possible to isolate the nonlinearity in the cost function of the network. The latter is linearized each time close to the solution found in the preceding iteration.     

The Management of a Large Mediterranean Reservoir: Storage Regimens of the Yesa Reservoir,Upper Aragon River Basin,Central Spanish Pyrenees

Agriculture in Mediterranean countries is mainly based upon the irrigation of productive areas in the lowlands. For this reason, it is necessary to store large volumes of water in reservoirs located in mountain headwaters. These reservoirs have a relatively simple regimen of storage, increasing the water stored during the wet season (from October until May) and reaching the maximum volume shortly before the beginning of the hot, very dry season, when the water is released. This paper considers the storage regimen (inflow and outflow) of the Yesa Reservoir in the Spanish Pyrenees as an example of management of a large reservoir in a mountain Mediterranean environment, subject to a strong interannual variability. On average, the highest water storage level is achieved by retaining the high flows of the Aragón River in autumn and spring. Nevertheless, the irregularity of rainfalls and the existence of changes in the hydrological regimen lead to changes in the patterns of reservoir filling. Two patterns were identified in the Yesa Reservoir: (1) a quick increase of the stored volume in autumn, a stabilization in winter, and a new increase in spring; and (2) a continuous increase from October until May. These patterns are distributed in time over different periods since the construction of the reservoir in 1959, demonstrating the adjustment of the reservoir management to changes in the hydrological regimen.