Evaluation of an acid ammonium oxalate extraction to determine fluoride resident concentrations in soils

Fluoride depositions near aluminum smelters and other fluoride-emitting plants can lead to fluoride accumulation in soils, which constitutes a risk for ground water contamination. This study was conducted to investigate the capacity of a 0.2 M acid ammonium oxalate solution to selectively and quantitatively extract fluoride accumulated in soils. The recovery of fluoride added to three soils was evaluated following 7- to 28-d incubations. Oxalate extraction was also compared with a total fluoride extraction method, using oxalate-extractable fluoride (Fox) and total fluoride (Ftot) accumulation profiles derived from column percolation experiments. To determine low-level fluoride concentrations without interference from high Al and Fe concentrations, an adapted ion chromatography method was used. Following soil incubations, oxalate extracted 42 to 86% of added fluoride. Recovery varied between soils and, in one soil, increased with added fluoride concentration. Recovery was unaffected by incubation time. Maximum recovery was obtained in a soil high in amorphous Fe and Al, low in clay, and free of carbonate. Lower recoveries were obtained in soils with higher clay or carbonate contents. Only 4 to 8% of Ftot was extracted in untreated samples using Fox, which suggests a high selectivity of this method for added fluoride. In percolation experiments, the use of Fox reduced considerably the background noise associated with Ftot for the evaluation of fluoride accumulation profiles. Because of its high selectivity and despite incomplete fluoride recovery, the use of Fox to determine fluoride resident concentrations in soils may improve environmental monitoring of fluoride accumulation and movement in contaminated soils.     

137Cs in marine samples from the Brazilian southeastern coastal region

The present work presents the results of ¹³⁷Cs concentration in seawater, fish and sediments samples collect in 11 sampling points, crossing the Brazilian Southeastern coastal region, from Vitória (ES) to Santos (SP), on a routine basis from 1997 to 2002. This monitoring program was carried out by the Instituto de Radioproteção e Dosimetria (IRD/CNEN/MCT), in cooperation with the Instituto de Estudos do Mar Almirante Paulo Moreira (IEAPM/Brazilian Navy), aiming at determining artificial radionuclides in marine samples. Additionally to the ¹³⁷Cs results, ⁹⁰Sr concentrations in fish samples from 1998 to 2002 are also reported.The ¹³⁷Cs in seawater follows a lognormal distribution, with a geometric mean of 1.8 Bq m^-3 and a geometric standard deviation of 1.4 (n=54), decay corrected to June/2002. For ¹³⁷Cs levels in fish samples a geometric mean of 0.19 Bq kg⁻¹ and a geometric standard deviation of 2.9 (n=39), decay corrected to June/2002, with a range of 0.03 to 1.7 Bq kg⁻¹, were obtained. Based on the ¹³⁷Cs mean concentration in fish as well as in seawater, a transfer factor of 1 × 10² was calculated, which is quite in agreement with the recommended value found in the Safety Report Serie 19.     

A technicoeconomic approach for the selection of a site remediation strategy--part A: theory

A technicoeconomic model is developed to select an optimal strategy for the remediation of a contaminated site and to determine the value of this remediation strategy. The model is an extension of actual cost-benefit analysis, with consideration of "irreversible" remediation technology choices, technology effectiveness, and uncertainty on the site's level of contamination. The model considers the possibility of reducing uncertainty by both acquiring more and better information on the level of contamination and by offering the decision-maker the opportunity to reevaluate his decision and switch to a more appropriate technology. It is believed that this model will help decision-makers in the selection of a remediation strategy by presenting all potentially feasible strategies, and how uncertainty on the site's level of contamination affects these strategies.     

Tobacco Plants Detect a Decrease of Environmental Genotoxicity in Toulouse (France)

Tobacco plants, heterozygous for two independent loci involved in the chlorophyll parenchyma differentiation, allow the genotoxic effects of the atmosphere of the industrial estate South of Toulouse to be estimated. Somatic spots of green cellular colonies on yellow-green background, were counted to calculate the cellular rates of reversion. Two experiments were carried out in 1981, and in 1997. A general decrease of genotoxic effects was observed. These observations were interpreted as being due to a general decrease of the air pollution evaluated by the development of the concentrations of three toxic gases before and after the implementation of cleanup devices. The results obtained demonstrate the efficiency of this bio-indicator, which is easy to use and capable of integrating, in situ, genotoxic variations throughout the duration of plants' growth.     

A framework for assessment and monitoring of small mammals in a lowland tropical forest

Development projects in tropical forests can impact biodiversity.Assessment and monitoring programs based on the principles of adaptive management assist managers to identify and reduce suchimpacts. The small mammal community is one important component ofa forest ecosystem that may be impacted by development projects. In 1996, a natural gas exploration project was initiated in a Peruvian rainforest. The Smithsonian Institution's Monitoring andAssessment of Biodiversity program cooperated with Shell Prospecting and Development Peru to establish an adaptive management program to protect the region's biodiversity. In thisarticle, we discuss the role of assessing and monitoring small mammals in relation to the natural gas project. We outline theconceptual issues involved in establishing an assessment andmonitoring program, including setting objectives, evaluating the results and making appropriate decisions. We also summarizethe steps taken to implement the small mammal assessment, provideresults from the assessment and discuss protocols to identifyappropriate species for monitoring.     

Indices for assessment and monitoring of large mammals within an adaptive management framework

Many development projects intended to exploit natural resourcesare occurring in fragile ecosystems, and therefore the need forsound biodiversity assessment and monitoring programs is growing.Large mammals are important components of these fragile ecosystems, yet there are few strategies that attempt to assess and monitor entire large mammal communities in relation to development projects. We propose the use of two indices applied within a framework of adaptive management. An occurrence indexassesses the composition and distribution of large mammals at a site, and an abundance index monitors the abundance of large mammals over time in relation to development. We discuss the design, applicability and effectiveness of these indices based onour experience with a natural gas development project in the Amazon forests of southeastern Peru.     

Sources of lead and zinc associated with metal smelting activities in the Trail area,British Columbia,Canada

The spatial distribution and deposition of lead and zinc emitted from the Trail smelter, British Columbia, Canada, was studied by strategically locating moss bags in the area surrounding the smelter and monitoring the deposition of elements every three months. A combined diffusion/distribution model was applied to estimate the relative contribution of stack-emitted material and material emitted from the secondary sources (e.g., wind-blown dust from ore/slag storage piles, uncovered transportation/trucking of ore, and historical dust). The results indicate that secondary sources are the major contributor of lead and zinc deposited within a short distance from the smelter. Gradually, the stack emissions become the main source of Pb and Zn at greater distances from the smelter. Typical material originating from each source was characterized by SEM/EDX, which indicated a marked difference in their morphology and chemical composition.     

Dichloromethane Marine Risk Assessment with Special Reference to the Osparcom Region: North Sea

This risk assessment on dichloromethane was carried out specifically for the marine environment, following methodology given in the EU risk assessment Regulation (1488/94) and Guidance Document of the EU New and Existing Substances Regulation (TGD, 1997). The study consists of collection and evaluation of data on effects and environmental concentrations from analytical monitoring programs in large rivers and estuaries in the North Sea area. The risk is indicated by the ratio of 'predicted environmental concentrations' (PEC) to 'predicted no-effect concentrations' (PNEC) for the marine aquatic environment. In total, 23 studies for fish, 17 studies for invertebrates and 6 studies for algae were evaluated. Both acute and chronic toxicity studies were taken into account and appropriate assessment factors used to define a PNEC value of 830 microg/l. Most of the available monitoring data apply to rivers and estuaries and were used to calculate PECs. The most recent data (1983--1995) support a typical PEC for dichloromethane lower than 0.2 microg/l and a worst case PEC of 13.6 microg/l. Dichloromethane is not a 'toxic, persistent and liable to bioaccumulate' substance sensu the Oslo and Paris Conventions for the Prevention of Marine Pollution (OSPAR-DYNAMEC). The calculated PEC/PNEC ratios give margins of 60 to 4000 between the PNEC and PEC, dilution within the sea would further increase these margins. It can be concluded that the present use of dichloromethane does not present a risk to the marine aquatic environment.     

Microbial response to heavy metal-polluted soils: community analysis from phospholipid-linked fatty acids and ester-linked fatty acids extracts

Heavy metal pollution of soil is of concern for human health and ecosystem function. The soil microbial community should be a sensitive indicator of metal contamination effects on bioavailability and biogeochemical processes. Simple methods are needed to determine the degree of in situ pollution and effectiveness of remediating metal-contaminated soils. Currently, phospholipid-linked fatty acids (PLFAs) are preferred for microbial profiling but this method is time consuming, whereas direct soil extraction and transesterification of total ester-linked fatty acids (ELFAs) is attractive because of its simplicity. The 1998 mining acid-metal spill of >4000 ha in the Guadiamar watershed (southwestern Spain) provided a unique opportunity to study these two microbial lipid profiling methods. Replicated treatments were set up as nonpolluted, heavy metal polluted and reclaimed, and polluted soils. Inferences from whole community-diversity analysis and correlations of individual fatty acids with metals suggested Cu, Cd, and Zn were the most important in affecting microbial community structure, along with pH. The microbial stress marker, monounsaturated fatty acids, was significantly lower for reclaimed and polluted soil over nonpolluted soils for both PLFA and ELFA extraction. Another stress marker, the monounsaturated to saturated fatty acids ratio, only showed this for the PLFA. The general fungal marker (18:2omega6c), the arbuscule mycorrhizae marker (16:1omega5c), and iso- and anteiso-branched PLFAs (gram positive bacteria) were suppressed with increasing pollution whereas 17:0cy (gram negative bacteria) increased with metal pollution. For both extraction methods, richness and diversity were greater in nonpolluted soils and lowest in polluted soils. The ELFA method was sensitive for reflecting metal pollution on microbial communities and could be suitable for routine use in ecological monitoring and risk assessment programs because of its simplicity and reproducibility.