Surface ozone measurements in the southwest of the Iberian Peninsula (Huelva,Spain)

Introduction  

Photochemical ozone pollution of the lower troposphere (LT) is a very complex process involving meteorological, topographic emissions and chemical parameters. Ozone is considered the most important air pollutant in rural, suburban and industrial areas of many sites in the world since it strongly affects human health, vegetation and forest ecosystems, and its increase during the last decades has been significant. In addition, ozone is a greenhouse gas that contributes to climate change. For these reasons, it is necessary to carry out investigations that determine the behaviour of ozone at different locations. The aim of this work is to understand the levels and temporal variations of surface ozone in an industrial-urban region of the Southwest Iberian Peninsula.     

Demystifying the challenges and barriers to manage,develop, and transfer clean and green technologies in Brazilian academic research groups: Some empirical evidence

This work presents empirical evidence of the main challenges in managing/leading academic research groups on clean and green technologies in Brazilian universities. We also present evidence about the main barriers to the effective creation of innovation and technology transfer of these clean and green technologies. Empirical evidence come from PhD researchers/academics who lead/manage official research groups on clean (environmental, green) technologies. Results show the following: (a) The main challenges of managing research groups are the lack of an innovative culture, the lack of partnership with an industrial sector, and the necessity of keeping laboratories updated; (b) the main barriers to innovation and technology transfer are difficulties in not having enough researchers and staff members, assessments of academic performance that do not consider innovation, and an uncertain national legislation on clean technology. Based on these and others’ findings, we suggest that policymakers working on clean and green technologies pay attention to act and develop initiatives focusing on the following: providing direct financial support for laboratory improvement, linking academics and practitioners from the industrial sector, and providing training and development programs on clean and green technologies’ legislation and financial issues, such as the payoff of clean and green technologies and opportunities from green investors.     

Environmental PCBs in Guánica Bay,Puerto Rico: implications for community health

Guánica Bay, located in southwestern Puerto Rico, has suffered oil spills and other pollution discharges since the 1960s. Previous research showed elevated concentrations of polychlorinated biphenyls (PCBs) in coral reef and sediment. This research examined PCB concentrations in sediment and fish. Sediment and fish sampling in the bay was facilitated by community members. This study identified the second highest reported PCB level (129,300 ng/g) in sediment in the USA. Fish samples also showed elevated concentrations (1623 to 3768 ng/g), which were higher than the thresholds of safe levels of PCBs in fish for human consumption. The alarmingly high concentration of PCBs calls for proactive community engagement to bring awareness about contamination of the bay and more extensive sampling to test for the concentration of PCBs in seafood and the people of Guánica. This study also underscores the value of the involvement of local communities during sampling design aimed at identifying hot spots of contaminants.     

Spiking solvent, humidity and their impact on 2,4-D and 2,4-DCP extractability from high humic matter content soils

The 2,4-dichlorophenoxyacetic acid (2,4-D) is a hormone-like herbicide widely used in agriculture. Although its half life in soil is approximately two weeks, the thousands of tons introduced in the environment every year represent a risk for human health and the environment. Considering the toxic properties of this compound and its degradation products, it is important to assess and monitor the 2,4-D residues in agricultural soils. Furthermore, experiments of phyto/bioremediation are carried out to find economic and environmental friendly tools to restore the polluted soils. Accordingly, it is essential to accurately measure the amount of 2,4-D and its metabolites in soils. There is evidence that 2,4-D extraction from soil samples seriously depends on the physical and chemical properties of the soil, especially in those soils with high content of humic acids. The aim of this work was to assess the variables that influence the recovery and subsequent analysis of 2,4-D and its main metabolite (2,4-dichlorophenol) from those soils samples. The results showed that the recovery efficiency depends on the solvent and method used for the extraction, the amount and kind of solvent used for dissolving the herbicide and the soil water content at the moment of spiking. An optimized protocol for the extraction and quantification of 2,4-D and its main metabolite from soil samples is presented.     

An inhibitor of urease activity effectively reduces ammonia emissions from soil treated with urea under Mediterranean conditions

Urea is an important source of ammonia (NH₃) emissions to the atmosphere from agricultural soils. Abatement strategies are necessary in order to achieve NH₃ emission targets by reducing those emissions. In this context, a field experiment was carried out on a sunflower crop in spring 2006 with the aim of evaluating the effect of the N-(n-butyl) thiophosphoric triamide (NBPT) in the mitigation of volatilized NH₃ from a urea-fertilised soil. Ammonia emission was quantified, using the integrated horizontal flux (IHF) method, following application of urea with and without the urease inhibitor NBPT. Urea and a mixture of urea and NBPT (0.14%, w/w) were surface-applied at a rate of 170 kg N ha⁻¹ to circular plots (diameter 40 m). The soil was irrigated with 10 mm of water just after the application of urea to dissolve and incorporate it into the upper layer of soil. Over the duration of the measurement period (36 days) three peaks of NH₃ were observed. The first peak was associated with hydrolysis of urea after irrigation and the others with the increase of ammonia in soil solution after changes in atmospheric variables such as wind speed and rainfall. The total NH₃ emission during the whole experiment was 17.3 ± 0.5 kg NH₃–N ha⁻¹ in the case of urea treated soils and 10.0 ± 2.2 kg NH₃–N ha⁻¹ where NBPT was included with the urea (10.1 and 5.9%, respectively, of the applied urea–N). The lower NH₃ emissions from plots fertilised with urea + NBPT, compared with urea alone, were associated with a reduction in urease activity during the first 9 days after inhibitor application. This reduction in enzymatic activity promoted a decrease in the exchangeable NH₄⁺ pool.     

Heavy metal pollution exerts reduction/adaptation in the diversity and enzyme expression profile of heterotrophic bacteria in Cochin estuary, India

Over the past three decades heavy metal pollution has increased substantially in Cochin estuary, south west coast of India. Here we studied the distribution, diversity and enzyme expression profile of culturable microbial population along a pollution gradient. The distribution of resistance against 5 mM concentration of Zn, Co, Ni and Cu was observed among 90-100% of bacterial isolates retrieved from highly polluted Eloor, whereas it was less than 40% in Vypin and Munambam. Similarly, there was a difference in the distribution and diversity of bacterial phyla with predominance of Proteobacteria in Eloor and Firmicutes in Munambam and Vypin. We observed that 75-100% of the organisms retrieved from Eloor had low levels of expression for hydrolytic enzyme. In conclusion, the heavy metal pollution in Cochin estuary brought in reduction/adaptation in the distribution, diversity and enzyme expression profile of bacteria, which may impart adverse impacts on ecosystem functioning.     

Heavy metal concentrations in particle size fractions from street dust of Murcia (Spain) as the basis for risk assessment

Street dust has been sampled from six different types of land use of the city of Murcia (Spain). The samples were fractionated into eleven particle size fractions (<2, 2-10, 10-20, 20-50, 50-75, 75-106, 106-150, 150-180, 180-425, 425-850 μm and 850-2000 μm) and analyzed for Pb, Cu, Zn and Cd. The concentrations of these four potentially toxic metals were assessed, as well as the effect of particle size on their distribution. A severe enrichment of all metals was observed for all land-uses (industrial, suburban, urban and highways), with the concentration of all metals affected by the type of land-use. Coarse and fine particles in all cases showed concentrations of metals higher than those found in undisturbed areas. However, the results indicated a preferential partitioning of metals in fine particle size fractions in all cases, following a logarithmic distribution. The accumulation in the fine fractions was higher when the metals had an anthropogenic origin. The strong overrepresentation of metals in particles <10 μm indicates that if the finest fractions are removed by a vacuum-assisted dry sweeper or a regenerative-air sweeper the risk of metal dispersion and its consequent risk for humans will be highly reduced. Therefore, we recommend that risk assessment programs include monitoring of metal concentrations in dust where each land-use is separately evaluated. The finest particle fractions should be examined explicitly in order to apply the most efficient measures for reducing the risk of inhalation and ingestion of dust for humans and risk for the environment.     

Diclofenac photodegradation with the Perovskites BaFeyTi1-yO3 as catalysts

Environmental Science and Pollution Research - Perovskite oxides BaFeyTi1-yO3, with y = 0, 0.6, 0.8 and 1, were prepared by ceramic (CM) and complex polymerization methods (CPM) and utilized in...     

New trends in land tenure and environmental regularisation laws in the Brazilian Amazon

Regional Environmental Change - The main challenge on Brazil’s environmental agenda today is illegal deforestation in the Amazon, which to a large extent is a result of the state being unable...     

Factors influencing lead sorption-desorption at variable added metal concentrations in Rhodoxeralfs

The response of ten soils of the lithic Rhodoxeralf type to the supply of lead at concentrations of 500, 1000, 2000, 3000, 4000, 5000 and 6000 mg kg-1 was examined in batch sorption-desorption tests. Lead availability in the soils was found to depend on its partitioning between the soil solution and the solid phase as reflected in adsorption isotherms. The isotherms, of the H type, were consistent with a high affinity of the sorbent for the metal, with which it forms stable inner-sphere complexes on the soil surface. Sorption-desorption tests revealed that some properties of the soils such as their pH (mean=8) and high contents in clays (particularly in kaolinite) and crystalline iron oxides significantly influence Pb sorption, the effect being especially marked at high added metal concentrations. Added lead is largely retained by crystalline iron oxides and the soil clay fraction; the pH of the soil favours the release of variably-charged sites from both. The extent of Pb desorption was small, particularly at the lowest added levels (500 and 1000 mg kg-1). Desorption increased with increasing added Pb concentration and exceeded 50% at 5000 and 6000 mg kg-1; this suggests that Pb is present not only as inner-sphere complexes, but also as outer-sphere complexes and, partly, as precipitates. The desorption isotherms consist of three segments that exhibit significant differences depending on the added Pb concentration, namely: 500-1000, 2000-4000 and 5000-6000 mg kg-1.