Relationships between pesticides and organic carbon fractions in sediments of the Danshui River estuary and adjacent coastal areas of Taiwan

In order to understand the fate of pesticides in marine environments, concentrations of pesticides and different carbonaceous fractions were determined for surface sediments in the Danshui River and nearby coastal areas of Taiwan. The major compounds detected were tetrachlorobenzene, HCHs, chlordane, aldrin, DDDs, DDEs and DDTs. Total concentrations of pesticides in the sediments ranged from not detectable to 23 ng g(-1), with the maximum value detected near the discharge point of the marine outfall from the Pali sewage treatment plant. These results confirm that pesticides persist in estuarine and nearby coastal environments of the Danshui River well after their ban. Concentrations of total pesticides significantly correlate with concentrations of total organic carbon and black carbon in these sediments, suggesting that total organic carbon and black carbon regulate the distribution of trace organic pollutants in fluvial and coastal marine sediments.     

Detection of veterinary drug residues in surface waters collected nearby farming areas in Galicia,North of Spain

The occurrence of pharmaceuticals in the aquatic environment has become a matter of concern in the last decade due to potential risks posed to non-target organisms and the potential for unintended human exposure via food chain. This concern has been driven by a high detection frequency for drugs in environmental samples; these substances are produced in large quantities and are used in both veterinary and human medicine, leading to deposition and potential effects in the environment. However, few studies have focused on the presence of pharmaceuticals in rural areas associated with farming activities in comparison to urban areas. The aim of this study is to investigate the occurrence of pharmaceutically active compounds in surface waters collected from urban and rural areas in northwestern Spain. A monitoring study was conducted with 312 river water samples analysed by high-performance liquid chromatography coupled to tandem mass spectrometry. Positive detection of pharmaceuticals was made for 51 % of the samples. Decoquinate, sulfamethazine, sulfamethoxypyridazine and trimethoprim were the drugs most frequently detected, being present in more than 10 % of the samples. The sampling sites located downstream of the discharge points for wastewater treatment plants yielded the highest number of positive samples, 13 % of the positive samples were detected in these sites and 38 % of the samples collected near the collection point of a drinking water treatment plant were positive.     

Changes of turbidity during the phenol oxidation by photo-Fenton treatment

Turbidity presented by phenol solutions oxidized with Fenton reagent shows the tendency of a first order intermediate kinetics. Thus, turbidity can be considered a representative parameter of the presence of intermediate oxidation species, which are generated along the decomposition of toxic and reluctant contaminants, such as phenol. Moreover, that parameter presents a linear dependence with the catalyst dosage, but is also determined by the initial contaminant load. When analyzing the oxidation mechanism of phenol, it is found that the maximum turbidity occurs when the treatment is carried out at oxidant to phenol molar ratios R?=?4.0. These oxidation conditions correspond to the presence of a reaction mixture mainly composed of dihydroxylated rings, precursors of the muconic acid formation. The oxidation via “para” comprises the formation reactions of charge transfer complexes (quinhydrone), between the para-dihydroxylated intermediates (hydroquinone) and the para-substituted quinones (p-benzoquinone), which are quite unstable and reactive species, quickly decomposed into hydroxyhydroquinones. Working with oxidant ratios up to R?=?6.0, the maximum observed value of turbidity in the oxidized solutions is kept almost constant. It is found that, in these conditions, the pyrogallol formation is maximal, what is generated through the degradation of ortho-species (catechol and ortho-benzoquinone) and meta-substituted (resorcinol). Operating with ratios over R?=?6.0, these intermediates are decomposed into biodegradable acids, generating lower turbidity in the solution. Then, the residual turbidity is a function of the molar ratio of the ferrous ions vs. moles of oxidant utilized in the essays, that lets to estimate the stoichiometric dosage of catalyst as 20 mg/L at pH?=?3.0, whereas operating in stoichiometric conditions, R?=?14.0, the residual turbidity of water results almost null.     

Analysis of Temporal and Spatial Dichotomous PM Air Samples in the El Paso-Cd. Juarez Air Quality Basin

ABSTRACT

This paper presents and discusses the results obtained from the gravimetric and chemical analyses of the 24-hr average dichotomous samples collected from five sites in the El Paso-Cd. Juarez air quality basin between August 1999 and March 2000. Gravimetric analysis was performed to determine the temporal and spatial variations of PM_2.5 (particulate matter less than 2.5 um in diameter) and PM2.5-10 (particulate matter less than 10 μm but greater than 2.5 μm in diameter) mass concentrations. The results indicate that ~25% of the PM10 (i.e., PM2.5 + PM2.5-10) concentration is composed of PM2.5. Concurrent measurements of hourly PM concentrations and wind speed showed strong diurnal patterns of the regional PM pollution. Results of X-ray fluorescence (XRF) elemental analyses were compared to similar but limited studies performed by the Texas Natural Resource Conservation Commission (TNRCC) in 1990 and 1997. Major elements from geologic sources—Al, Si, Ca, Na, K, Fe, and Ti—accounted for 35% of the total mass concentrations in the PM2.5-10 fraction, indicating that geologic sources in the area are the dominant PM sources. Levels of toxic trace elements, mainly considered as products of anthropogenic activities, have decreased significantly from those observed in 1990 and 1997.     

Comparison of batch leaching tests and influence of pH on the release of metals from construction and demolition wastes

Construction and demolition wastes are suitable for use in road construction. However, leaching characterization of recycled materials is required to determine their pollutant potential and the consequence of their application in different scenarios. The motivation of this paper is derived from the increasing use of different leaching test methods. In Europe, the confusion resulting from the wide variety of tests used to evaluate environmental properties of construction materials implies that an evaluation of the current practices and the attempt to consolidate the approaches are required.Two equilibrium-based leaching tests (the Dutch test and the European standard) were conducted to assess the environmental impact of four recycled aggregates. Three natural limestone aggregates were used as controls. Both tests measure the potential release of hazardous elements under extreme conditions using different leaching parameters (L/S ratio, pH value and contact time). The results proved that pH is the most relevant factor on the assessment of the differences between leaching methods due to its strong control on the pollutant release.To classify the materials according to their environmental effects, the concentration limit values of the metals imposed by Council Decision 2003/33/EC were used as a reference. The comparison allowed the classification of the recycled aggregates as inert wastes, with the exception of the MR-2 aggregate, which was classified as non-hazardous material.     

Local sustainability processes worldwide: a systematic review of the literature and research agenda

This article presents a systematic literature review of 109 articles (1992–2015) dealing with Local Agenda 21 processes worldwide. It analyzes two essential elements of Local Agenda 21: (1) the holistic approach of the sustainable development concept and (2) the main driving forces behind such processes. It shows that, although at the beginning, sustainability was seen as a natural extension of environmental policy work, it has been perceived over recent years as a guiding principle applied to issues of environment, economic development, and social welfare, and Local Agenda 21 is perceived as a coherent approach to sustainability planning. In addition, Local Government Strategy is the main typology followed, although it suffers from important limitations. Future studies could focus on local sustainability process outcomes. Further quantitative studies would be welcome, given the qualitative case study dominance in the field. We conclude with a research agenda to tackle theoretical, methodological, and empirical lacunae.     

Kinetic and morphology study of alginate-vineyard pruning waste biocomposite vs. non modified vineyard pruning waste for dye removal

In this work a comparative bioadsorption study between a biocomposite consisting of hydrolysed vineyard pruning waste entrapped in calcium alginate spheres and non entrapped vineyard residue was carried out.Results have demonstrated that the biocomposite based on lignocellulose-calcium alginate spheres removed 77.3% of dyes,while non entrapped lignocellulose eliminated only removed 27.8% of colour compounds.The experimental data were fitted to several kinetic models(pseudo-first order,pseudo-second order,Chien–Clayton model,intraparticle diffusion model and Bangham model); being pseudo-second order the kinetic model that better described the adsorption of dyes onto both bioadsorbents.In addition,a morphological study(roughness and shape) of alginate-vineyard biocomposite was established under extreme conditions,observing significant differences between hydrated and dehydrated alginate-vineyard biocomposite.The techniques used to carry out this morphological study consisted of scanning electron microscopy(SEM),perfilometry and 3D surface analysis.