Effect of design parameters in horizontal flow constructed wetland on the behaviour of volatile fatty acids and volatile alkylsulfides

A pilot-scale horizontal flow constructed wetland (HFCW) system planted with common reed (Phragmites sp.) was constructed to study how hydraulic loading rate (HLR), aspect ratio, water depth, and granular medium affect to the fate of several organic matter degradation intermediates namely, acetic acid (HAc), isovaleric acid (Isoval), and dimethylsulfide (DMS). ANOVA statistical analysis performed on the data set of 8 months of operation shows that the HLR and the water depth are two major factors that control the performance of HFCWs for the target analytes. A clear difference in the HFCW effluent concentrations was obtained according to water depth. Effluents of the shallow water depth contained lower DMS (1.05-1.44 microg l-1), HAc (7.91-10.9 mg l-1), and Isoval (0.11-0.15 mg l-1) concentrations than the deeper beds (DMS: 1.68-2.40 microg l-1; HAc: 9.29-14.4 mg l-1, and Isoval: 0.20-0.31 mg l-1). Such differences could be accounted to the different formation and consumption rates of the organic matter degradation intermediates, which is related with the redox potentials (E). Indeed, it could lead to different biochemical reactions of organic matter degradation according with the E value. HLR has a statistically significant influence on the effluent HAc, Isoval, and DMS concentrations. Seasonal variability of effluent HAc concentration shows that it is independent on the HAc loading. While the loading showed no seasonal pattern, the removal efficiency was clearly higher in cold months, which suggests a predominant internal production of HAc in HFCWs in the warm season from the accumulated organic particulate matter. Similar results were also found when Isoval and DMS were considered.     

Toxic Substances in the Atmospheric Environment Discussion

The Critical Review on Toxic Substances in the Atmospheric Environment was presented by Bernard D. Goldstein at the 76th Annual Meeting of the Air Pollution Control Association in Atlanta, Georgia. Dr. Goldstein summarized his paper, which had been published in the May 1983 issue of JAPCA. Prepared discussions presented at the Critical Review Session are reproduced here. In addition, comments made from the floor and through the mails have been formalized and are published along with closing remarks by Dr. Goldstein. Dr. Paul J. Lioy served as Moderator for the 1983 Critical Review Session.     

The impact of tourism on municipal solid waste generation: The case of Menorca Island (Spain)

Tourism can sustain high levels of employment and income, but the sector is a source of environmental and health impacts. One of the most important is the generation of municipal solid waste (MSW). However, there is a lack of studies which quantify how much the tourist population engages in total MSW and separately collected recyclables. The aim of this paper is to estimate the impact of the tourist population on MSW, both total and separately collected, for the period 1998–2010, for the Mediterranean island of Menorca (Spain). We use dynamic regressions models, including data for monthly stocks of tourists. The results show that, on average, a 1% increase in the tourist population in Menorca causes an overall MSW increase of 0.282% and one more tourist in Menorca generates 1.31 kg day^?1 (while one more resident generates 1.48 kg day^?1). This result could be useful to better estimate the seasonal population of different regions, since intrannual fluctuation of MSW is used as a proxy measure of actual population (the sum of residents and tourists). Moreover, an increase of 1% in the tourist population causes an increase of 0.232% in separately collected recyclables and an additional tourist generates 0.160 kg day^?1. One resident selectively collects on average 47.3% more than one tourist. These results can help in the planning of waste infrastructure and waste collection services in tourist areas.     

17β-Estradiol and testosterone in drainage and runoff from poultry litter applications to tilled and no-till crop land under irrigation

Thirteen metric tons of poultry litter are produced annually by poultry producers in the U.S. Poultry litter contains the sex hormones estradiol and testosterone, endocrine disruptors that have been detected in surface waters. The objective of this study was to evaluate the potential impact of poultry litter applications on estradiol and testosterone concentrations in subsurface drainage and surface runoff in irrigated crop land under no-till and conventional-till management. We conducted an irrigation study in fall of 2001 and spring of 2002. Four treatments, no-till plus poultry litter, conventional-till plus poultry litter, no-till plus conventional fertilizer, and conventional-till plus conventional fertilizer, were evaluated. Flow-weighted concentration and load ha⁻¹ of the two hormones were measured in drainage and runoff. Soil concentrations of estradiol and testosterone were measured. Based on comparisons to the conventional fertilizer (and control) treatments, poultry litter did not add to the flow-weighted concentration or load ha⁻¹ of either estradiol or testosterone in subsurface drainage or surface runoff. Significant differences were, however, observed between tillage treatments: flow-weighted concentrations of estradiol were greater for no-till than conventional-till plots of the June irrigation; and runoff loads of both estradiol and testosterone were less from no-till than conventional-till plots for the November irrigation. Although the differences between no-till and conventional-tillage appeared to affect the hydrologic transport of both hormones, the differences appeared to have inconsequential environmental impact.     

Elimination of phenol and aromatic compounds by zero valent iron and EDTA at low temperature and atmospheric pressure

This work deals with a new abiotic oxidation process designed as a suitable pre-treatment step within a biological depuration of wastewater containing phenol or its derivatives (o-cresol, 2-chlorophenol and p-nitrophenol) or aniline. The reaction was carried out in a stirred tank reactor at 20 degrees C and atmospheric pressure in presence of the organic compound, 150mgl(-1), zero valent iron particles (10g), ethylenediamine tetraacetic acid (EDTA, 101mgl(-1)) and air. The experimental results show that 85% of phenol conversion can be achieved after 360min. 2-Chlorophenol was found to be more easily degradable and it is completely eliminated after 300min. The oxidation of o-cresol and aniline behaved more closely to phenol obtaining after 360min 70% and 68% of conversion respectively. p-Nitrophenol was a very refractory compound, giving only 28% of conversion after 360min. Moreover, the influence of some operating variables was studied over the following ranges: temperature from 20 to 50 degrees C, initial phenol concentration from 150 to 1000mgl(-1), EDTA concentration from 50 to 200mgl(-1) and iron particles from 5 to 20g. As expected, temperature strongly enhances phenol conversion. Also, an increase of the catalyst to phenol ratio or the iron or EDTA to phenol ratio improves the reaction rate. A preliminary kinetic analysis of the data shown that the rate of phenol disappearance is not first order with respect to the phenol.     

Transport of organic contaminants through salinity stratified water masses. A microcosm experiment

A salt-wedge stratified microcosm, spiked with 31 target analytes, including PCBs, organochlorine and organophosphorous pesticides, triazines, organophosphate flame retardants and caffeine (an urban wastewater molecular marker), was setup. Compound behaviour was monitored during a four week period, by sampling at six different levels of the water column, in order to understand the transport and loss processes of the different classes of chemical substances. Compound transport from one water body to the other has been positively correlated with diffusion via their molar volume. Target analytes loss has been positively correlated with evaporation via their K(H) and with degradation via their halve-lives. From these two processes, evaporation was found to be predominant using a multiparametric regression.     

Mercury levels and liver pathology in feral fish living in the vicinity of a mercury cell chlor-alkali factory

Twenty-three barbels (Barbus graellsii), 30 bleaks (Alburnus alburnus) and 4 sediment samples were collected from four areas of the Cinca River (NE Spain), upstream and downstream of a mercury cell chlor-alkali plant. Mercury concentration in sediments downstream of the plant was about 25 times higher than the concentration upstream. Mercury levels in the muscle and liver of barbels downstream of the chlor-alkali plant were 10 and 30 times higher than those upstream. The average mercury concentration in the muscle and liver of barbels downstream of the factory was 1.48 and 1.78mg/kgw.w., with maximal concentrations of 2.43 and 3.64mg/kgw.w, respectively. Liver/muscle ratio of mercury was significantly higher in barbels sampled downstream of the factory. Bleak showed a similar pattern, with a significantly higher whole-body mercury concentration downstream of the chlor-alkali plant. Nevertheless, a progressive decrease in mercury concentration downstream of the impact area was found in bleak, but not in barbel. Histopathological analysis showed that fish downstream of the factory had significantly higher prevalence of liver pathologies (p<0.05). Although there are no specific histopathological markers of mercury exposure, barbels with the highest Hg levels in the liver also showed the most severe pathologies, and the processes found in these barbels were consistent with the pro-oxidant effect of heavy metals.     

Spatial and temporal trends of polycyclic aromatic hydrocarbons in wild mussels from the Cantabrian coast (N Spain) after the Prestige oil spill

Polycyclic aromatic hydrocarbon (PAH) levels were determined in tissues of wild mussels (Mytilus galloprovincialis) collected at 17 stations along the Cantabrian coast (N Spain), from Navia (Asturias) to Fuenterrabía (Basque Country), in order to assess the extent of the environmental impact caused by the Prestige oil spill (November 13, 2002). Six sampling campaigns were carried out in April, June and November in 2003 and 2004. The comparison of PAH data with those obtained earlier in 2000 showed a widespread pyrolytic and petrogenic contamination and allowed an estimation, for the first time, of the background pollution in the region and identification of the chronic hotspots. The spatial distribution found in the first samples after the oil spill revealed the eastern area as the most affected due to the continuous arrival of fuel slicks since early summer 2003. Several stations in this area showed increased total PAH concentrations of up to 15 times the pre-spill levels, which did not recover until April 2004, more than one year after the accident. Molecular parameters within the aliphatic and aromatic fractions were determined to assess the presence of Prestige oil in these samples.     

Assessment of the Mediterranean sediments contamination by persistent organic pollutants

A compilation of information about levels of selected persistent organic pollutants, namely polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroetane and its degradation products (DDTs) and hexachlorobenzene (HCB), in Mediterranean sediments, including data published from 1971 to 2005, has been conducted in order to assess their main drivers and pressures in the environment. The application of mapping tools (GIS) and statistical instruments enabled the assessment of geographical and temporal trends. Chemical contamination mainly originates from land-based sources, and decreases significantly when moving off-shore. Contamination hot spots are generally located along the Northern coastline. The data for open sea sediments enabled the establishment of background levels of contamination for the region. A decreasing temporal trend in concentrations was found, more evident in the case of DDTs probably due to a more efficient regulation of this chemical. Finally, some gaps in reliable data were also identified which were related to the lack of information in the southern and eastern parts of the Mediterranean as well as the variety of analytical methodologies used.     

Temporal evolution in PPCP removal from urban wastewater by constructed wetlands of different configuration: a medium-term study

Pharmaceuticals and personal care products (PPCPs) are widely distributed in urban wastewaters and can be removed to some extent by constructed wetlands (CWs). The medium-term (3-5 years) behaviour of these systems regarding PPCP removal is still unknown. Seven mesocosm-scale (1 m²) CWs of different configurations were operated outdoors for 39 months under the same conditions to assess their PPCP removal ability and temporal evolution. CWs differed in some design parameters, namely plant presence, species chosen (Typha angustifolia vs Phragmites australis), flow configuration and presence/absence of gravel bed (floating macrophytes surface flow, FM-SF; free-water surface flow, FW-SF; free-water subsurface flow, FW-SSF; or conventional horizontal subsurface flow, SSF). PPCP efficiencies decreased throughout time and performance differences among CWs disappeared with the systems aging. This could be due to a homogenization process in the systems caused by detrimental factors like saturation, clogging and shading. Winter efficiencies were lower than summer ones for salicylic acid, caffeine, methyl dihydrojasmonate, galaxolide and tonalide, and seasonal biological activities seem key factors to explain this fact. Maximal removal efficiencies were achieved in an unplanted-FW-SSF for ketoprofen (47-81%), naproxen (58-81%) and salicylic acid (76-98%); in an unplanted-SSF for caffeine (65-99%); in a Phragmites-FM-SF for ibuprofen (49-96%) and diclofenac (16-68%); in a Typha-FM-SF for carbamazepine (35-71%); and in a Typha-FW-SSF for methyl dihydrojasmonate (71-96%), galaxolide (67-82%) and tonalide (55-74%). Photodegradation could be involved in ketoprofen, naproxen, ibuprofen and diclofenac removal. Carbamazepine and diclofenac were moderately removed by the most efficient CWs studied. Carbamazepine might be eliminated by vegetal uptake.