Risk-based optimization of the design of on-shore pipeline shutdown systems

Crude oil and other liquid materials are transported in large quantities through pipelines. Pipelines are an efficient and safe transport way as compared to both rail and road transportation, both from the economical and environmental points of view. Nevertheless, loss of containment accidents can occur due to external action –a mechanical impact, for example– or to corrosion, aging, etc. Even though the frequency of such events is certainly very low, the effects and consequences on environment can be very important.The consequences of accidents in pipelines can be efficiently reduced through a suitable design of the whole system. One of the points which must be decided in the design is the installation of blocking valves at appropriate distances, so that emergency shutdowns can interrupt the flow of substance and isolate the section where the loss of containment has taken place. In the case of pipe rupture the amount released is therefore limited to the content between two consecutive valves, usually placed according to heuristic criteria. However, if too many valves are used, the capital cost of equipment increases excessively, and if too few are used, the risk of serious accidents increases.In this paper we consider the possibility of improving the design of such systems by applying risk-based optimization criteria. We propose an optimization methodology to solve this conflict by means of an objective function that analyzes the variations in overall costs, including the cost of the investment (with specific reference to blocking valves) and the cost of accidents. The result is an optimum situation in which costs are kept to a minimum. As an example, we apply the methodology to the transportation of gasoline by pipeline.     

Using loose nanofiltration membrane for lake water treatment: A pilot study

• A pilot study was conducted for drinking water treatment using loose NF membranes. • The membranes had very high rejection of NOM and medium rejection of Ca²⁺/Mg²⁺. • Organic fouling was dominant and contribution of inorganic fouling was substantial. • Both organic and inorganic fouling had spatial non-uniformity on membrane surface. • Applying EDTA at basic conditions was effective in removing membrane fouling. Nanofiltration (NF) using loose membranes has a high application potential for advanced treatment of drinking water by selectively removing contaminants from the water, while membrane fouling remains one of the biggest problems of the process. This paper reported a seven-month pilot study of using a loose NF membrane to treat a sand filtration effluent which had a relatively high turbidity (~0.4 NTU) and high concentrations of organic matter (up to 5 mg/L as TOC), hardness and sulfate. Results showed that the membrane demonstrated a high rejection of TOC (by>90%) and a moderately high rejection of two pesticides (54%–82%) while a moderate rejection of both calcium and magnesium (~45%) and a low rejection of total dissolved solids (~27%). The membrane elements suffered from severe membrane fouling, with the membrane permeance decreased by 70% after 85 days operation. The membrane fouling was dominated by organic fouling, while biological fouling was moderate. Inorganic fouling was mainly caused by deposition of aluminum-bearing substances. Though inorganic foulants were minor contents on membrane, their contribution to overall membrane fouling was substantial. Membrane fouling was not uniform on membrane. While contents of organic and inorganic foulants were the highest at the inlet and outlet region, respectively, the severity of membrane fouling increased from the inlet to the outlet region of membrane element with a difference higher than 30%. While alkaline cleaning was not effective in removing the membrane foulants, the use of ethylenediamine tetraacetate (EDTA) at alkaline conditions could effectively restore the membrane permeance.     

Rainfall timing and poultry litter application rate effects on phosphorus loss in surface runoff

Phosphorus (P) in runoff from pastures amended with poultry litter may be a significant contributor to eutrophication of lakes and streams in Georgia and other areas in the southeastern United States. The objectives of this research were to determine the effects of litter application rate and initial runoff timing on the long-term loss of P in runoff from surface-applied poultry litter and to develop equations that predict P loss in runoff under these conditions. Litter application rates of 2, 7, and 13 Mg ha(-1), and three rainfall scenarios applied to 1- x 2-m plots in a 3 x 3 randomized complete block design with three replications. The rainfall scenarios included (i) sufficient rainfall to produce runoff immediately after litter application; (ii) no rainfall for 30 d after litter application; and (iii) small rainfall events every 7 d (5 min at 75 mm h(-1)) for 30 d. Phosphorus loss was greatest from the high litter rate and immediate runoff treatments. Nonlinear regression equations based on the small plot study produced fairly accurate (r(2) = 0.52-0.62) prediction of P concentrations in runoff water from larger (0.75 ha) fields over a 2-yr period. Predicted P concentrations were closest to observed values for events that occurred shortly after litter application, and the relative error in predictions increased with time after litter application. In addition, previously developed equations relating soil test P levels to runoff P concentrations were ineffective in the presence of surface-applied litter.     

Alum treatment of poultry litter: decomposition and nitrogen dynamics

While the poultry industry is a major economic benefit to several areas in the USA, land application of poultry litter to recycle nutrients can lead to impaired surface and ground water quality. Amending poultry litter with alum [Al3(SO4)2 x 14H2O] has received considerable attention as a method of economically reducing ammonia volatilization in the poultry house and soluble phosphorus in runoff waters. The objective of this study was to characterize the effect of alum on broiler litter decomposition and N dynamics under laboratory conditions. Litter that had been amended with alum in the poultry house after each of the first four of five flock cycles (Experiment I) and litter that had been amended with alum after removal from a poultry house after the third flock cycle (Experiment II) were compared with unamended litter in separate studies. The litters in Experiment I were surface-applied to simulate application to grasslands, while the litters in Experiment II were incorporated to simulate application to conventionally tilled crops. The only statistically significant differences in decomposition due to alum occurred early in Experiment II and the differences were small. The only statistically significant differences in net N mineralization, soil inorganic N, and soil NH4+-N in either experiment was found in Experiment I after 70 d of incubation where soil inorganic N was significantly greater for the alum treatment. Thus, alum had little effect on decomposition or N dynamics. Results of many of the studies on litter not amended with alum should be applicable to litters amended with alum to reduce P availability.     

Surveillance programme on dioxin levels in ambient air sites in Catalonia (Spain)

As part of a survey programme conducted by the Environment Department of the Autonomous Government of Catalonia in collaboration with the Spanish Council for Scientific Research (CSIC), dioxin concentrations in ambient air were measured in the four provinces of Catalonia (Spain). The study was also performed with the intention of providing data as a basis for future monitoring and evaluation of temporal trends in ambient air. Thus, 91 samples were collected in 25 different sites (rural, urban, suburban and industrial) between 1994 and 2000. The levels revealed a variable content of PCDDs/PCDFs depending both on the area and the contamination source. In particular, industrial areas presented levels ranging from 18 to 954 fg I-TEQ/m3. However, findings in urban and suburban sites varied between 13 and 357 fg I-TEQ/m3. As expected, the lowest levels were found in rural areas with levels between 5 and 125 fg I-TEQ/m3.     

Phosphorus losses from grasslands fertilized with broiler litter: EPIC simulations

Broiler litter, a mixture of poultry excreta and bedding material, is commonly used to fertilize grasslands in the southeastern USA. Previous work has shown that under certain situations, application of broiler (Gallus gallus domesticus) litter to grasslands may lead to elevated levels of phosphorus (P) in surface runoff. The EPIC simulation model may be a useful tool to identify those situations. This work was conducted to evaluate EPIC's ability to simulate event and annual runoff volume and losses of dissolved reactive phosphorus (DRP) from tall fescue (Festuca arundinacea Schreb.)-bermudagrass [Cynodon dactylon (L.) Pers.] paddocks fertilized with broiler litter. The EPIC simulations of event runoff volume showed a trend toward underestimation, particularly for runoff events >30 mm. On an annual basis, EPIC also tended to underestimate runoff, especially at runoff volumes > 100 mm. Both event and annual runoff estimations were strongly associated with observed values, indicating that model calibration could improve the simulation of surface runoff volume. The relationship between simulated and observed values of DRP loss was relatively poor on an event basis (r=0.65), but was stronger (r=0.75) on an annual basis. In general, EPIC tended to underestimate annual DRP losses. This underestimation was apparently caused by the lack of an explicit mechanism to model broiler litter on the soil surface. These results suggested that additional work on the EPIC P submodel would be warranted to improve its simulation of surface application of broiler litter to grasslands.     

A California air standard to protect vegetation from ozone

Evidence shows that the current national primary ambient air quality standard, if attained, would still permit substantial injury to vegetation. Thus, in March 1987, the California Air Resources Board (CARB) began consideration of the evidence for the effects of ozone (O3) on vegetation, and of several possible state ambient air quality standards designed to protect vegetation, especially crops, from O3 injury. In its review, the CARB addressed a number of issues relevant to such a standard. One issue considered by the CARB is the relationship of an ambient air quality standard to natural background levels of O3, which would greatly influence the practicality of attainment. Attainment of a standard close to natural background could entail excessive costs. Another issue considered is the occurrence of oxidants other than O3 that can damage vegetation. Throughout much of California, O3 accounts for over 90% of the oxidant air pollutants, and the CARB considered whether, in keeping with current practice, O3 should be used as a surrogate for total oxidant air pollutants. A major new piece of information presented to the CARB was an assessment of the economic effects of several potential standards. This assessment, produced by University of California scientists at Riverside and Davis, calculated the benefits of the potential standards in comparison to current O3 levels and estimated natural O3 background. This assessment was developed using field chamber response data, local crop data, and local O3 concentration data as inputs to the California Agricultural Resources Model, which accounts for both supply and demand effects. Because of California's varied climate, agricultural production occurs on a year-round basis, with overlapping growing seasons for many crops. Over long periods of time, O3 levels may vary markedly because of the influence of various factors, and a 1-h standard may not be an accurate indicator of growing season O3 exposure. A moving three-month averaging time has been proposed as a way to approximate the growing seasons of California's 200 crops. However, a sufficiently stringent 1-h standard would serve as a surrogate for a growing season standard. The CARB reviewed evidence supporting both long-term and short-term standards. Agriculture dominates the economies of some regions within California but is a minor components of other regional economies. Because the San Joaquin Valley is California's most important agricultural area, the CARB reviewed evidence for a regional standard for this area that would be more stringent than standards for other parts of the state.     

Screening ecological risk assessment of persistent organic pollutants in Mediterranean sea sediments

A screening ecological risk assessment (ERA) was conducted for the first time in the Mediterranean basin in order to assess the toxicity posed to the benthic community by PCBs, DDTs and HCB in marine sediments. The characterization of the exposure was conducted by means of an extensive literature survey, generating a database with more than 2000 samples. The effects were assessed by the adoption of guidelines previously developed in the literature, because ecotoxicological information about persistent organic pollutants (POPs) in the Mediterranean sediments was lacking. Existing sediment quality guidelines (SQGs) for the target pollutants were compiled and consensus values were calculated for three different categories of toxicity, namely threshold effect concentration (TEC), probable effect concentration (PEC) and extreme effect concentration (EEC). The combination of exposure and effects characterization enabled the identification of some areas of concern in the vicinity of industrial and urban locations and in the mouths of the main Mediterranean rivers. Beyond the Mediterranean continental shelf, the level of toxicity for the benthic community was generally low. The evaluation of the toxicity induced by the mixture of the target pollutants spotted the importance of DDT contamination in the Mediterranean sediments, despite the fact that main inputs to the sea have been significantly reduced during the last decades.