Soil-extractable phosphorus and phosphorus saturation threshold in beef cattle pastures as affected by grazing management and forage type

Grazing can accelerate and alter the timing of nutrient transfer, and could increase the amount of extractable phosphorus (P) cycle from soils to plants. The effects of grazing management and/or forage type that control P cycling and distribution in pasture's resources have not been sufficiently evaluated. Our ability to estimate the levels and changes of soil-extractable P and other crop nutrients in subtropical beef cattle pastures has the potential to improve our understanding of P dynamics and nutrient cycling at the landscape level. To date, very little attention has been paid to evaluating transfers of extractable P in pasture with varying grazing management and different forage type. Whether or not P losses from grazed pastures are significantly greater than background losses and how these losses are affected by soil, forage management, or stocking density are not well understood. The objective of this study was to evaluate the effect of grazing management (rotational versus “zero” grazing) and forage types (FT; bahiagrass, Paspalum notatum, Flugge versus rhizoma peanuts, Arachis glabrata, Benth) on the levels of extractable soil P and degree of P saturation in beef cattle pastures. This study (2004–2007) was conducted at the Subtropical Agricultural Research Station, US Department of Agriculture–Agricultural Research Service located 7 miles north of Brooksville, FL. Soil (Candler fine sand) at this location was described as well-drained hyperthermic uncoated Typic Quartzipsamments. A split plot arrangement in a completely randomized block design was used and each treatment was replicated four times. The main plot was represented by grazing management (grazing vs. no grazing) while forage types (bahiagrass vs. perennial peanut) as the sub-plot treatment. Eight steel exclosures (10?×?10 m) were used in the study. Four exclosures were placed and established in four pastures with bahiagrass and four exclosures were established in four pastures with rhizoma peanuts to represent the “zero” grazing treatment. The levels of soil-extractable P and degree of P saturation (averaged across FT and soil depth) of 22.1 mg kg^?1 and 11.6 % in pastures with zero grazing were not significantly (p?≤?0.05) different from the levels of soil-extractable P and degree of P saturation of 22.8 mg kg^?1 and 12.9 % in pastures with rotational grazing, respectively. On the effect of FT, levels of soil-extractable P and degree of P saturation were significantly higher in pastures with rhizoma peanuts than in pastures with bahiagrass. There was no net gain of soil-extractable P due to the presence of animals in pastures with rotational grazing. Averaged across years, soil-extractable P in pastures with rotational grazing and with “zero” grazing was less than 150 mg kg^?1, the water quality protection. There had been no movement of soil-extractable P into the soil pedon since average degree of P saturation in the upper 15 cm was 14.3 % while the average degree of P saturation in soils at 15–30 cm was about 9.9 %. Overall, average extractable P did not exceed the crop requirement threshold of 50 mg P kg^?1 and the soil P saturation threshold of 25 %, suggesting that reactive P is not a problem. Our study revealed that rhizoma peanuts and bahiagrass differ both in their capacity to acquire nutrients from the soil and in the amount of nutrients they need per unit growth. Rhizoma peanuts, which are leguminous forage, would require higher amounts of P compared with bahiagrass. The difference in the amount of P needed by these forages could have a profound effect on their P uptake that can be translated to the remaining amount of P in the soils. Periodic applications of additional P may be necessary especially for pastures with rhizoma peanuts to sustain their agronomic needs and to potentially offset the export of P due to animal production. Addition of organic amendments could represent an important strategy to protect pasture lands from excessive soil resources exploitation.     

Radiosynthesis of perfluorooctanesulfonate (PFOS) and perfluorobutanesulfonate (PFBS), including solubility, partition and adhesion studies

Here, we describe for the first time the synthesis of [³⁵S] PFOS and [³⁵S] PFBS with sulfur-35 enriched sulfur dioxide as the radiolabelled reagent, resulting in 2.5 and 2.3 mCi of product, respectively. Basic information concerning the physicochemical properties of perfluorooctanesulfonate (PFOS), perfluorobutanesulfonate (PFBS) and perfluorooctanoic acid (PFOA) are still limited. Hence, we utilized these radiolabelled perfluoroalkanesulfonates (PFSAs), as well as carbon-14 labelled perfluorooctanoic acid ([¹⁴C] PFOA) to determine some basic characteristics of physiological and experimental significance.The solubility of PFOS in buffered aqueous solutions at pH 7.4 was found to be severely reduced in the presence of potassium and sodium ions, which, however, did not reduce the solubility of PFOA or PFBS. PFOS was found to adhere to a small extent to polypropylene and polystyrene, whereas no such adhesion of PFOA or PFBS was detected. The extents of adhesion of PFOS and PFOA to glass were found to be 20% and 10%, respectively. For the first time, the partition coefficients for PFOS, PFBS and PFOA between n-octanol and water were determined experimentally, to be −0.7, −0.3, and 1.4, respectively, reflecting the difference in the amphiphilic natures of these molecules.     

Sunlight-induced degradation of soil-adsorbed veterinary antimicrobials Marbofloxacin and Enrofloxacin

Marbofloxacin (MAR) and Enrofloxacin (ENR), two largely employed veterinary Fluoroquinolones (FQs), were found to be present at the micrograms per kilogram level in agricultural soils of South Lombardy (Italy) several months after manuring. Distribution coefficients (K_d) from sorption experiments indicated a strong binding to the soil. Soil samples fortified with environmentally significant FQs amounts (0.5 mg kg⁻¹) were exposed to solar light that promoted extensive degradation (80%) of both drugs in 60-150 h. Thus, photochemistry could be considered a significant depollution path in the soil, although it was two orders of magnitudes slower than in aqueous solution and a fraction of the drug (ca. 20%) remained unaffected. For MAR the photoprocess was the same as in solution, and involved cleavage of the tetrahydrooxadiazine ring. On the contrary, with ENR only some of the photoproducts determined in water (those arising from a stepwise oxidation of the piperazine side chain) were observed. Substitution of the 6-fluoro by a hydroxyl group and reduction did not occur in the soil, supporting the previous contention that such processes required polar solvation of FQs. Consistently with this rationalization, the irradiation of thin layers of solid drugs led to essentially the same products distribution as in the soil. From the environmental point of view it is important to notice that photodegradation mainly affects the side-chains, while the fluoroquinolone ring, to which the biological effect is associated, is conserved up to the later stages of the degradation.     

Lead-210 and Beryllium-7 fallout rates on the southeastern coast of Brazil

Total ²¹⁰Pb and ⁷Be fallout rates were measured on the coastal region of Niteroi, Brazil. The monthly depositional flux of ²¹⁰Pb and ⁷Be varied by a factor of 26, from 1.7 to 43.3 mBq cm⁻² year⁻¹ and ∼27, from 7.5 to 203.5 mBq cm⁻² year⁻¹, respectively. The relatively large oscillations in the depositional flux of ²¹⁰Pb at this study site were likely due to variations in air mass sources, while the ⁷Be fluctuations may be driven by a combination of weather conditions. Local geology could support the periodic high fluxes of ²¹⁰Pb from continental air masses, as shifting oceanic wind sources were affirmed by the uncorrelated ²¹⁰Pb and ⁷Be fallout activities and ⁷Be/²¹⁰Pb ratios. The ²¹⁰Pb atmospheric deposition was found to be in agreement with local sediment inventories, an important consideration in geochemical studies that estimate sedimentation processes.     

Macrodispersion by diverging radial flows in randomly heterogeneous porous media

Radial flow takes place in a heterogeneous porous formation where the transmissivity T is modelled as a stationary random space function (RSF). The steady flow is driven by a given rate, and the mean velocity is radial. A pulse-like of a tracer is injected in the porous formation, and the thin plume spreads due to the fluctuations of the velocity which results a RSF as well. Transport is characterized by the mean front, and by the second spatial moment of the plume. We are primarily interested in tracer macrodispersion modelling. With the neglect of pore-scale dispersion, macrodispersion coefficients are computed at the second order of approximation, without neglecting the head-gradient fluctuations. Although transport is non-ergodic at the source, it is shown that ergodicity is achieved at small distances from the source. This is due to the fact that close to the source local velocities are quite large, and therefore solute particles become uncorrelated very soon. Under ergodic conditions, we compare macrodispersion mechanism in radial flows with that occurring in mean uniform flows. At short distances the spreading effect is highly enhanced by the large variability of the flow field, whereas at large distances transport exhibits a lesser dispersion due to the reduction of velocities. This supports the explanation provided by Indelman and Dagan (1999) to justify why the macrodispersivity is found smaller than that pertaining to mean uniform flows. The model is tested against a tracer transport experiment (Fernàndez-Garcia et al., 2004) by comparing the theoretical and experimental breakthrough curves. The accordance with real data, that is achieved without any fitting to concentration values, strengthens the capability of the proposed model to grasp the main features of such an experiment, the approximations as well as experimental uncertainties notwithstanding.     

A Case History of the Science and Management Collaboration in Understanding Hypoxia Events in Long Bay, South Carolina, USA

Communication of knowledge between the scientific and management communities is a difficult process complicated by the distinctive nature of professional career goals of scientists and decision-makers. This article provides a case history highlighting a collaboration between the science and management communities that resulted from a response to a 2004 hypoxia, or low dissolved oxygen, event in Long Bay, off Myrtle Beach, South Carolina. A working group of scientists and decision-makers was established at the time of the event and has continued to interact to develop a firm understanding of the drivers responsible for hypoxia formation in Long Bay. Several factors were found to be important to ensure that these collaborative efforts were productive: (1) genuine interest in collaboratively working across disciplines to examine a problem; (2) commitment by agency leadership, decision-makers, and researchers to create successful communication mechanisms; (3) respect for each others’ perspectives and an understanding how science and management are performed and that they are not mutually exclusive; (4) networking among researchers and decision-makers to ensure appropriate team members are involved in the process; (5) use of decision-maker input in the formulation of research and monitoring projects; and (6) commitment of resources for facilitation to ensure that researchers and decision-makers are communicating effectively.     

In Situ Burning Restores the Ecological Function and Structure of an Oil-Impacted Coastal Marsh

As the use of in situ burning for oil spill remediation in coastal wetlands accelerates, the capacity of this procedure to restore the ecological structure and function of oil-impacted wetlands becomes increasingly important. Thus, our research focused on evaluating the functional and structural recovery of a coastal marsh in South Louisiana to an in situ burn following a Hurricane Katrina-induced oil spill. Permanent sampling plots were set up to monitor marsh recovery in the oiled and burned areas as well as non-oiled and non-burned (reference) marshes. Plots were monitored for species composition, stem density, above- and belowground productivity, marsh resiliency, soil chemistry, soil residual oil, and organic matter decomposition. The burn removed the majority of the oil from the marsh, and structurally the marsh recovered rapidly. Plant biomass and species composition returned to control levels within 9 months; however, species richness remained somewhat lower in the oiled and burned areas compared to the reference areas. Recovery of ecological function was also rapid following the in situ burn. Aboveground and belowground plant productivity recovered within one growing season, and although decomposition rates were initially higher in the oiled areas, over time they became equivalent to those in reference sites. Also, marsh resiliency, i.e., the rate of recovery from our applied disturbances, was not affected by the in situ burn. We conclude that in situ burning is an effective way to remove oil and allow ecosystem recovery in coastal marshes.     

Policy Development for Biodiversity Offsets: A Review of Offset Frameworks

Biodiversity offsets seek to compensate for residual environmental impacts of planned developments after appropriate steps have been taken to avoid, minimize or restore impacts on site. Offsets are emerging as an increasingly employed mechanism for achieving net environmental benefits, with offset policies being advanced in a wide range of countries (i.e., United States, Australia, Brazil, Colombia, and South Africa). To support policy development for biodiversity offsets, we review a set of major offset policy frameworks—US wetlands mitigation, US conservation banking, EU Natura 2000, Australian offset policies in New South Wales, Victoria, and Western Australia, and Brazilian industrial and forest offsets. We compare how the frameworks define offset policy goals, approach the mitigation process, and address six key issues for implementing offsets: (1) equivalence of project impacts with offset gains; (2) location of the offset relative to the impact site; (3) “additionality” (a new contribution to conservation) and acceptable types of offsets; (4) timing of project impacts versus offset benefits; (5) offset duration and compliance; and (6) “currency” and mitigation replacement ratios. We find substantial policy commonalities that may serve as a sound basis for future development of biodiversity offsets policy. We also identify issues requiring further policy guidance, including how best to: (1) ensure conformance with the mitigation hierarchy; (2) identify the most environmentally preferable offsets within a landscape context; and (3) determine appropriate mitigation replacement ratios.     

Fish Migration, Dams, and Loss of Ecosystem Services in the Mekong Basin

The past decade has seen increased international recognition of the importance of the services provided by natural ecosystems. It is unclear however whether such international awareness will lead to improved environmental management in many regions. We explore this issue by examining the specific case of fish migration and dams on the Mekong river. We determine that dams on the Mekong mainstem and major tributaries will have a major impact on the basin’s fisheries and the people who depend upon them for food and income. We find no evidence that current moves towards dam construction will stop, and consider two scenarios for the future of the fisheries and other ecosystems of the basin. We conclude that major investment is required in innovative technology to reduce the loss of ecosystem services, and alternative livelihood strategies to cope with the losses that do occur.     

Can urban tree roots improve infiltration through compacted subsoils for stormwater management?

Global land use patterns and increasing pressures on water resources demand creative urban stormwater management. Strategies encouraging infiltration can enhance groundwater recharge and water quality. Urban subsoils are often relatively impermeable, and the construction of many stormwater detention best management practices (D-BMPs) exacerbates this condition. Root paths can act as conduits for water, but this function has not been demonstrated for stormwater BMPs where standing water and dense subsoils create a unique environment. We examined whether tree roots can penetrate compacted subsoils and increase infiltration rates in the context of a novel infiltration BMP (I-BMP). Black oak (Quercus velutina Lam.) and red maple (Acer rubrum L.) trees, and an unplanted control, were installed in cylindrical planting sleeves surrounded by clay loam soil at two compaction levels (bulk density = 1.3 or 1.6 g cm(-3)) in irrigated containers. Roots of both species penetrated the more compacted soil, increasing infiltration rates by an average of 153%. Similarly, green ash (Fraxinus pennsylvanica Marsh.) trees were grown in CUSoil (Amereq Corp., New York) separated from compacted clay loam subsoil (1.6 g cm(-3)) by a geotextile. A drain hole at mid depth in the CUSoil layer mimicked the overflow drain in a stormwater I-BMP thus allowing water to pool above the subsoil. Roots penetrated the geotextile and subsoil and increased average infiltration rate 27-fold compared to unplanted controls. Although high water tables may limit tree rooting depth, some species may be effective tools for increasing water infiltration and enhancing groundwater recharge in this and other I-BMPs (e.g., raingardens and bioswales).