Development of a biaxial loading frame for sheet metal

Characterization of the evolving yield loci and forming limit diagrams for sheet materials under biaxial loading is necessary for the development of accurate sheet metal forming process simulations. Biaxial tension testing has been shown to have significant advantages over the current computational and experimental methods for such material characterization; however, the few commercially available loading frames are far too large and expensive to be practical for most metal forming research laboratories. In this paper, the design of a practical servohydraulic biaxial loading frame is presented. The design, control, and operation of the loading frame are discussed in detail, and experimental data is provided to validate the effectiveness of the control system with respect to specimen center shifting.     

Analysis of an APCA Baghouse Operation and Maintenance Survey

Baghouse operation and maintenance is probably the most serious problem area of fabric filter operations. Committee TC-1 (Particulates) of the Air Pollution Control Association recently surveyed baghouse installations in'the United States for the purpose of gathering information on operation and maintenance procedures and problems. One hundred thirty-three questionnaires were completed and returned. In this paper, the results of a comprehensive analysis of these data are described and interpreted. A multiple-choice type of compilation of the responses has been used to permit statistical interpretation of the results. Due to the length of the questionnaire and the tables which resulted from the analysis, these are described but not included in the following paper. They are available from the TC-1 Committee c/o APCA.     

Estimating the extent and structure of trade in horticultural orchids via social media

The wildlife trade is a lucrative industry involving thousands of animal and plant species. The increasing use of the internet for both legal and illegal wildlife trade is well documented, but there is evidence that trade may be emerging on new online technologies such as social media. Using the orchid trade as a case study, we conducted the first systematic survey of wildlife trade on an international social‐media website. We focused on themed forums (groups), where people with similar interests can interact by uploading images or text (posts) that are visible to other group members. We used social‐network analysis to examine the ties between 150 of these orchid‐themed groups to determine the structure of the network. We found 4 communities of closely linked groups based around shared language. Most trade occurred in a community that consisted of English‐speaking and Southeast Asian groups. In addition to the network analysis, we randomly sampled 30 groups from the whole network to assess the prevalence of trade in cultivated and wild plants. Of 55,805 posts recorded over 12 weeks, 8.9% contained plants for sale, and 22–46% of these posts pertained to wild‐collected orchids. Although total numbers of posts about trade were relatively small, the large proportion of posts advertising wild orchids for sale supports calls for better monitoring of social media for trade in wild‐collected plants.     

long Term Goals for Environmental Control— What’s Desirable and Possible in the Year 2000?

A panel discussion looking forward to the environment in the year 2000, was arranged by Lionel V. Baldwin, Program Chairman for APCA’s 67th Annual Meeting. To provide a lofty introduction of the subject he reached into outer space for a moderator—Captain Walter M. Schirra, one of the original astronaut team.     

Immobilized Fe (III)-doped titanium dioxide for photodegradation of dissolved organic compounds in water

Photocatalytic degradation of dissolved organic carbon (DOC) by utilizing Fe(III)-doped TiO₂ at the visible radiation range is hereby reported. The photocatalyst was immobilized on sintered glass frits with the coating done by wet method, calcinated at 500 °C and then applied in a photodegradation reactor. The addition of a transition metal dopant, Fe(III), initiated the red shift which was confirmed by UV–Vis spectroscopy, and the photocatalyst was activated by visible radiation. X-ray diffraction patterns showed that Fe(III) doping had an effect on the crystallinity of the photocatalysts. Mixtures of DOC and associated coloured solutions were degraded in first-order kinetics, showing that the degradation process was not dependent on intermediates or other species in solution. A reactor with a catalyst coating area of 12.57 cm² was able to degrade 0.623 mg of the dissolved material per minute. Exposure of the reactor to hostile acidic conditions and repeated use did not compromise its efficiency. It was observed that the reactor regenerates itself in the presence of visible light, and therefore, it can be re-used for more than 100 runs before the performance dropped to <95 %. The results obtained indicate that the photocatalyst reactor has a great potential of application for use in tandem with biosorbent cartridges to complement water purification methods for domestic consumption.     

Potential of acid activated clays in the clarification of menhaden stickwater

Abstract

The primary objective of this investigation was to determine the feasibility of using acid activated clays to clarify menhaden stickwater effluent. Experiments, such as physical and chemical properties determinations, effect of changes in pH and temperature and coagulation, and coagulation followed by clay treatment were also performed to study the separation of solids in stickwater.

Analysis of the stickwater showed that it contained 4.5% crude protein, 1.4% crude fat, 6.5% total solids, 1.13% ash and 93.1% water. At a wavelength of 575 um, the sample absorbed all the light and the percent transmittance was zero. When diluted 1:100 the percent transmittance was 0.39 at the same wavelength. Measured at 25°C the sample had a viscosity of 9.0 centipoises.

The results showed that the precipitation of fat increased with increasing temperatures, while the reverse was true for protein. A pH of 4.0 gave the maximum clarification at all temperatures employed. The viscosity decreased at pH values above and below the original pH of the sample.

Among the four different acid activated clays used in this study (trade names Supact‐150, Impact‐150, Impact‐12 and Impact‐1OORR), Impact‐150 was the most effective in protein and fat precipitation, and the degree of separation of these components increased by treating stickwater with a coagulant (aluminum sulfate) prior to treatment with acid activated clay.     

Hazardous Waste Minimization: Part Vii (B) Hazardous Waste Minimization within the Department of Defense

This article is a series of representative case studies of Department of Defense hazardous waste minimization. Each Military Department and the Defense Logistics Agency describe actual accomplishments. Areas covered range from production line modification to product specification change. These efforts are part of a Department of Defense plan composed of individual programs executed independently by each military service and defense agency.

Part VII of the hazardous waste minimization series appears in two separate installments: the first installment, Part VII (A), dealt with Department of Defense waste minimization efforts in vehicle repair operations, explosives manufacturing, and abrasive blasting processes; Part VII (B) covers shipboard mercury wastes, industrial chemical control, solvent reclamation, and hazardous property sales efforts.     

Ambient Air Monitoring for Sulfur Compounds

The role of sulfur compounds in our environment has been the subject of much speculation during the past two decades. An evaluation of the effect of man-made contributions to the biogeochemical sulfur cycle requires a comprehensive examination of source magnitudes, atmospheric concentrations and removal processes. Many voids exist in our present knowledge of these parameters despite the contributions of numerous researchers. Adequate information is needed concerning the various forms of sulfur as well as other critical constituents which exist in our biosphere so that their interrelationship and role in the mechanisms of the sulfur cycle may be more fully understood.