The identification of three previously unreported lindane metabolites from mammals

Previously unreported metabolites from the urine of rats treated with lindane have been identified as configurational isomers of 2,4,5,6- and 2,3,4,6-tetrachloro-2-cyclohexen-1-ol. In addition, an intermediate metabolite from the incubation of lindane with liver preparations, under N₂, has been identified as the configurational isomer γ-3,4,5,6-tetrachlorocyclohex-1-ene. The pathways leading to these metabolites appear to have an important role in the metabolism of lindane by mammals.     

Identification of dimethylchloroarsine near a former herbicide factory by headspace solid-phase microextraction gas chromatography-mass spectrometry

The application of an improved method based on multidetector gas chromatography to the determination of trace levels of organoarsines in complex matrices is described. The method using headspace-mode solid-phase microextraction (SPME) was applied to a carefully sampled and preserved freshwater sediment core obtained from central Green Bay, Lake Michigan. The sediment core was collected and fractionated in an inert atmosphere. A carboxen/ polydimethylsiloxane-coated SPME fiber (85 microm film thickness) was equilibrated (n = 4) for 60 min at 25 degrees C in the headspace of the sample vessel before introduction to the chromatograph. Conventional quadrupole ion trap mass spectrometry (electron impact ionization), electron capture detection, and pulsed flame photometric detection (arsenic mode) were employed for structure elucidation. A heretofore unidentified species in this region, dimethylchloroarsine (DMCA). was identified. The mass spectrum for DMCA is interpreted based on the observed fragmentation pattern. A bimodal vertical distribution of DMCA in the sediment core sample was observed and its interpretation based on Pb-210 dating is reported.     

Measurement of phase-distributed nitrophenols in Rome ambient air

Atmospheric nitrophenols (NPs) were determined both in the gas and particle phases by combining the annular denuder sampling technique with GC-MS analysis. The phase distribution of six mono-NPs identified in air sampled in downtown Rome was assessed. 4-NP, 3-methyl-4-NP and 2,6-dimethyl-4-NP were found for more than 75% in the particle phase, whilst 2-NP, 4-methyl-2-NP and 5-methyl-2-NP predominated in the gas phase. Concentration levels lower than 20 ng m-3 were observed for all NPs, among which 4-NP (17.8+/-5.6 ng m-3) and 2-NP (10.4+/-4.2 ng m-3) were the most abundant congeners in the two phases, respectively.     

Molarity provides better clarity – using molar-based data when evaluating chlorinated volatile organic compound impacted sites

Abstract

Chlorinated volatile organic compounds are common constituents observed at many contaminated groundwater sites. Common industry practice has been to measure these constituents in groundwater on a weight concentration basis (e.g. µg/l, mg/l). This paper highlights the use of molar-based concentrations, especially in the case of parent-daughter degradation sequences commonly observed with the chloroethene, chloroethane, and chloromethane families of compounds. Converting to molar-based concentrations provides the practitioner greater insight into groundwater plume behavior including better evaluation of degradation processes, remedial progress, possible commingling, and/or sourcing. For example, this paper provides a tank analogy to evaluate whether the commonly misinterpreted observation of “DCE-stall” may be occurring at a site. Multiple examples of the benefits of using molar-based concentration data are also summarized in a project case study presented herein. As demonstrated in this paper, molarity does provide better clarity and can be a powerful evaluation tool in the groundwater practitioner’s toolbox.     

Modeling radium and radon transport through soil and vegetation

A one-dimensional flow and transport model was developed to describe the movement of two fluid phases, gas and water, within a porous medium and the transport of 226Ra and 222Rn within and between these two phases. Included in this model is the vegetative uptake of water and aqueous 226Ra and 222Rn that can be extracted from the soil via the transpiration stream. The mathematical model is formulated through a set of phase balance equations and a set of species balance equations. Mass exchange, sink terms and the dependence of physical properties upon phase composition couple the two sets of equations. Numerical solution of each set, with iteration between the sets, is carried out leading to a set-iterative compositional model. The Petrov-Galerkin finite element approach is used to allow for upstream weighting if required for a given simulation. Mass lumping improves solution convergence and stability behavior. The resulting numerical model was applied to four problems and was found to produce accurate, mass conservative solutions when compared to published experimental and numerical results and theoretical column experiments. Preliminary results suggest that the model can be used as an investigative tool to determine the feasibility of phytoremediating radium and radon-contaminated soil.     

Changes in water quality after addition of sea salts to fresh water: implications during toxicity testing

Sea salts (seven brands from six commercially-available sources) were dissolved in water to develop 30 g/l solutions, and selected water quality characteristics were then monitored for 96 h. One or more water quality characteristics changed significantly during the 96 h period in six of the reconstituted sea salts. Measured characteristics of sea water diluted to 30 g/l demonstrated no changes during the observation period. The sea salts from different sources also demonstrated differences in absolute concentrations of some characteristics measured. Application of the Biotic Ligand Model to predict copper toxicity to the bivalve Mytilus edulis in solutions of the salts tested yielded 96-h median-lethal concentrations that ranged from 2 to 13 μg/l. Since water quality affects toxicity of many environmental pollutants, the source of the sea salt and equilibration time should be considered when planning toxicity tests.     

Dibenzo-p-dioxins in the environment from ceramics and pottery produced from ball clay mined in the United States

Processed ball clay samples used in the production of ceramics and samples of the ceramic products were collected and analyzed for the presence and concentration of the 2,3,7,8-Cl substituted polychlorinated dibenzo-p-dioxins and -furans (PCDDs/PCDFs). The processed ball clay had average PCDD concentrations of 3.2 ng/g toxic equivalents, a congener profile, and isomer distribution consistent with those found previously in raw ball clay. The PCDF concentrations were below the average limit of detection (LOD) of 0.5 pg/g. The final fired ceramic products were found to be free of PCDDs/PCDFs at the LODs. A consideration of the conditions involved in the firing process suggests that the PCDDs, if not destroyed, may be released to the atmosphere and could represent an as yet unidentified source of dioxins to the environment. In addition, the PCDDs in clay dust generated during manufacturing operations may represent a potential occupational exposure.     

Effects of dimethoate on honey bee foraging

Collection by honey bees of sucrose solutions treated with dimethoate continued uninterrupted until 2.9–3.9 μg/bee had been accumulated. This self-limiting dose was 20–25 times the oral LD₅₀ for honey bees. Therefore a mean of 45 collection trips involving 1 ppm dimethoate or 11 trips involving 5 ppm was possible before foraging ceased. Losses in pollinator effectiveness and adult and larval mortality are likely to result from dimethoate contamination of nectar.     

Oxygenated fuel induced cosolvent effects on the dissolution of polynuclear aromatic hydrocarbons from contaminated soil

The cosolvent-induced dissolution of polynuclear aromatic hydrocarbons (PAHs) from contaminated soil caused by oxygenated fuel spills was studied. Oxygenated fuel induces a solvent flushing effect on the contaminated soil due to the high content of oxygenated compounds (i.e., methanol, ethanol, and methyl tert butyl ether (MTBE)). The miscible displacement techniques were applied to evaluate the increased potential for secondary contamination in an impacted site. Significant solubility enhancement of the 18 PAHs monitored during fuel spill simulation and cosolvent flushing is clearly evident when compared to normal water dissolution. The breakthrough concentration profile for each PAH constituent was integrated over the cumulative effluent volume (i.e., the zeroth moment) to determine the total PAH mass removed during the experiment. The removal efficiency of PAHs ranges from 46.6% to 99.9% in three oxygenated fuels (i.e., M85, E85, and oxygenated gasoline) during the fuel spill. Several factors including hydrophobicity of compounds, nonequilibrium dissolution due to nonuniform coal tar distribution, and heterogeneous media properties affect the oxygenated compound-induced dissolution process. This study provides a basis to predict the facilitated transport of hydrophobic organic compounds from subsurface environment due to the cosolvent effects of oxygenated fuels.     

Atmospheric volatilization and distribution of (Z)- and (E)-1,3-dichloropropene in field beds with and without plastic covers

The fumigant 1,3-dichloropropene (1,3-D) is considered to be a potential replacement for methyl bromide when methyl bromide is phased out in 2005. This study on surface emissions and subsurface diffusion of 1,3-D in a Florida sandy soil was conducted in field beds with or without plastic covers. After injection of the commercial fumigant Telone II by conventional chisels to field beds at 30cm depth which were covered with polyethylene film (PE), virtually impermeable film, or no cover (bare), (Z)- and (E)-1,3-D rapidly diffused upward. Twenty hours after injection, majority of (Z)- and (E)-1,3-D had moved upward from 30 cm depth to the layer of 5-20 cm depth. Downward movement of the two isomers in the beds with or without a plastic cover was not significant. (Z)-1,3-D diffused more rapidly than (E)-1,3-D. Virtually impermeable films (VIF) had a good capacity to retain (Z)- and (E)-1,3-D in soil pore air space. Vapor concentrations of the two isomers in the shallow subsurface of the field bed covered with VIF were greater than that in the two beds covered with polyethylene film (PE) or no cover (bare). In addition, VIF cover provided more uniform distribution of (Z)- and (E)-1,3-D in shallow subsurface than PE cover or no cover. Virtually impermeable film also had a better capability to retard surface emissions of the two isomers from soil in field beds than PE cover or no cover.