Determination of organophosphorus fire retardants and plasticizers in wastewater samples using MAE-SPME with GC-ICPMS and GC-TOFMS detection

Determination of organophosphorus fire retardants and plasticizers at trace levels in wastewater is described. In this work, microwave assisted extraction (MAE) and solid-phase microextraction (SPME) are used for sample preparation to extract and preconcentrate the analytes, followed by analysis by gas chromatography coupled to inductively coupled plasma mass spectrometry (GC-ICP-MS) for phosphorus-specific detection. Gas chromatography coupled to time of flight mass spectrometry (GC-TOF-MS) was used to confirm the organphosphorus fire retardants in wastewater. The detection limits of organophosphorus fire retardants (OPFRs) were 29 ng L(-1) for tri-n-butyl phosphate (TnBP), 45 ng for L(-1) for tris(2-butoxyethyl)phosphate (TBEP), and 50 ng L(-1) for tris(2-ethylhexyl)phosphate (TEHP). Optimized extraction conditions were performed at 65 degrees C for 30 min and with 10% NaCl. Application of MAE during the sample preparation prior to the SPME allowed the detection of tris(2-ethylhexyl) phosphate, which has been difficult to determine in previous work. Application of the method to wastewater samples resulted in detecting 3.1 microg L(-1) P from TnBP, 5.0 microg L(-1) P from TBEP, and 4.0 microg L(-1) P from TEHP. The presence of these compounds were also confirmed by SPME-GC-TOF-MS.     

Effects of roof and rainwater characteristics on copper concentrations in roof runoff

Copper sheeting is a common roofing material used in many parts of the world. However, copper dissolved from roof sheeting represents a source of copper ions to watersheds. Researchers have studied and recently developed a simple and efficient model to predict copper runoff rates. Important input parameters include precipitation amount, rain pH, and roof angle. We hypothesized that the length of a roof also positively correlates with copper concentration (thus, runoff rates) on the basis that runoff concentrations should positively correlate with contact time between acidic rain and the copper sheet. In this study, a novel system was designed to test and model the effects of roof length (length of roof from crown to the drip edge) on runoff copper concentrations relative to rain pH and roof angle. The system consisted of a flat-bottom copper trough mounted on an apparatus that allowed run length and slope to be varied. Water of known chemistry was trickled down the trough at a constant rate and sampled at the bottom. Consistent with other studies, as pH of the synthetic rainwater decreased, runoff copper concentrations increased. At all pH values tested, these results indicated that run length was more important in explaining variability in copper concentrations than was the roof slope. The regression equation with log-transformed data (R ² = 0.873) accounted for slightly more variability than the equation with untransformed data (R ² = 0.834). In log-transformed data, roof angle was not significant in predicting copper concentrations.     

The hydrochemistry of groundwater in rural communities within the Tema District, Ghana

A detailed study has been carried out on groundwater in rural communities in the Tema District of the Greater Accra region of Ghana to establish the hydrochemistry and identify the various sources of contaminants as well assess the physical and chemical quality of the groundwater to ascertain their wholesomeness and the health impacts of the groundwater on the communities. The groundwater was found to vary considerably in terms of chemical and physical properties. Generally, the water was mildly acidic (pH 4.3–7.4), brackish to fresh, and undersaturated with respect to gypsum and halite. The majority of groundwater clustered toward Ca–Mg–SO₄ and Na–Cl facies. About 70% of boreholes sampled have elevated levels of NO₃ ^??–N, Cl^???, and SO₄ ^2? emanating from anthropogenic activities.     

Nutrient environment of red tide- infested waters off south-west coast of India

The bloom-infested waters along the southwest coast of India were assessed to bring about the probable cause related to the excessive algal production. Low nitrate and silicate concentrations were concomitant with slightly higher levels of phosphate. The silicate depletion in the bloom area is possibly an indication of community succession (diatom to dinoflagellate), since it was completely utilized by the preceding diatom blooms. The dinoflagellates in this region could have been advected from the northern regions where it was noticed during the previous months.     

Review of advances in the thin layer chromatography of pesticides: 2008–2010

Techniques and applications of thin layer chromatography (planar chromatography) for the separation, detection, qualitative and quantitative determination, and preparative isolation of pesticides and their metabolites and other related compounds are reviewed for the period from November 1, 2008 to November 1, 2010. Analyses are described for a variety of samples types and pesticide classes. In addition to references on residue analysis, studies such as pesticide structure-retention relationships, identification and characterization of plant pesticides and synthesized pesticides, metabolism, degradation, mobility, identification of biomarkers for detection of herbicide effects in plants, and lipophilicity are covered.     

The Basic Economics of Hydrocarbon Vapor Control

The best interest of any company is well served when responsibility for procurement of vapor control equipment is properly fixed. From discovery of need, to final operation of the equipment, many events must occur and much effort must be expended. In many petroleum industry marketing terminals today, decentralization of control has forced terminal managers to become cost center managers as well as distribution facility managers, and this added responsibility is valuable. Who else is in a better position to evaluate the true operating costs of any equipment and to carry out the responsibility of finding the right equipment for the job at hand? Where companies employ central engineering staffs, the necessary support studies should be made available to the terminal manager so that he can understand and review: (1) the capital investment and related depreciation expense; (2) the need for preventive maintenance programs as suggested by bidding equipment suppliers; (3) the need for local contractors to bid on preventive maintenance programs; (4) company maintenance routines and all labor expense involved; and (5) budget preparation for both capital and expense budgets.     

Interstate Compacts—An Evaluation

This paper discusses the development of interstate compacts and legal and constitutional principles which are applicable thereto for the purpose of evaluating compacts as an effective legal mechanism for joint action on an interstate basis to control air pollution. It suggests there is no inherent reason why, presupposing fundamental agreements as to the basic policy to be served by the compacting states, an effective compact cannot be concluded. The paper also discusses the various criticisms that have been leveled against interstate compacts and some of the pitfalls now existing in interstate compacts in the field of water pollution. The discussion mentions certain caveats to be considered in drafting effective compacts to control air pollution. The compact mechanism does not possess inherent infirmities which preclude its effective use in the field of air pollution control, but whatever infirmities may exist are traceable to underlying factors of an essentially nonlegal nature.     

Experience with Electrostatic Fly-Ash Collection Equipment Serving Steam-Electric Generating Plants

This paper describes a test program to evaluate parameters responsible for subnormal performance of several electrostatic fly-ash collectors. Improper flow distribution, exit gas temperature, sulfur in the fuel, and acid dewpoint were found to be variables responsible for poor performance. Remedial steps taken to restore collector efficiency to acceptable levels are discussed.     

Penetration and Duration of Oxidant Air Pollution in the South Coast Air Basin of California

On June 18, 19, and 20, 1970, two aircraft, a rawinsonde, two pibal stations, and four ground stations provided simultaneous samples of total oxidant, temperature, and winds up to 8000 ft in an area extending from Santa Monica, Calif., east to Redlands and north across the San Bernardino Mountains. It was shown that photochemical oxidant formed in the marine layer is vented up the slopes and over the crest of the San Bernardino Mountains during the day. Layers of high oxidant concentrations were detected above the inversion base, suggesting that some pollution is vented up the slopes and subsequently advected back to the south. The diurnal changes in the temperature inversion also contribute to the high concentration found above the inversion base. These processes result in multi-layers of pollution. The study suggests that oxidant air pollution is transported up to 80 mi to forested mountains, where severe damage to conifer species has been documented.     

Assessment of Arsenic Losses during Ashing: A Comparison of Two Methods Applied to Atmospheric Participates

A comparison was made of over 300 pairs of arsenic results from instrumental neutron activation and flameless atomic absorption analyses of atmospheric particulates collected on glass fiber filters. Atomic absorption analyses involved low temperature ashing of filters at high power levels. No matrix modification chemicals were added to the acid extract which was analyzed. Neutron activation results are on the average 9% higher than those obtained by atomic absorption and the difference is statistically significant. This small difference is probably due to the analytical techniques or acid extraction and not in any important way to losses during low temperature ashing. This conclusion is in sharp contrast to other recently reported situations where low temperature ashing losses in analyzing atmospheric particulate were sizable. Although the atmospheres sampled differed somewhat between these situations the most obvious difference was in the combustibility of the filters used in sampling.