Impacts of prescribed fires and benefits from their reduction for air quality,health, and visibility in the Pacific Northwest of the United States

Using a WRF-SMOKE-CMAQ modeling framework, we investigate the impacts of smoke from prescribed fires on model performance, regional and loc al air quality, health impacts, and visibility in protected natural environments using three different prescribed fire emission scenarios: 100% fire, no fire, and 30% fire. The 30% fire case reflects a 70% reduction in fire activities due to harvesting of logging residues for use as a feedstock for a potential aviation biofuel supply chain. Overall model performance improves for several performance metrics when fire emissions are included, especially for organic carbon, irrespective of the model goals and criteria used. This effect on model performance is more pronounced for the rural and remote IMPROVE sites for organic carbon and total PM_2.5. A reduction in prescribed fire emissions (30% fire case) results in significant improvement in air quality in areas in western Oregon, northern Idaho, and western Montana, where most prescribed fires occur. Prescribed burning contributes to visibility impairment, and a relatively large portion of protected class I areas will benefit from a reduced emission scenario. For the haziest 20% days, prescribed burning is an important source of visibility impairment, and approximately 50% of IMPROVE sites in the model domain show a significant improvement in visibility for the reduced fire case. Using BenMAP, a health impact assessment tool, we show that several hundred additional deaths, several thousand upper and lower respiratory symptom cases, several hundred bronchitis cases, and more than 35,000 workday losses can be attributed to prescribed fires, and these health impacts decrease by 25–30% when a 30% fire emission scenario is considered.

Implications: This study assesses the potential regional and local air quality, public health, and visibility impacts from prescribed burning activities, as well as benefits that can be achieved by a potential reduction in emissions for a scenario where biomass is harvested for conversion to biofuel. As prescribed burning activities become more frequent, they can be more detrimental for air quality and health. Forest residue-based biofuel industry can be source of cleaner fuel with co-benefits of improved air quality, reduction in health impacts, and improved visibility.     

Evaluation of vacuum and wet-wipe methods for removal of World Trade Center dust from indoor environments

The destruction of the buildings at the World Trade Center (WTC) complex dispersed dust and debris into the surrounding area. Pulverized building material made up most of the fallout and was intermixed with combustion byproducts of the aircraft and building contents. A study was conducted to confirm the effectiveness of several cleaning procedures in removing WTC-related contamination from lower Manhattan residences. The contaminants included asbestos, lead, dioxin/furans, synthetic vitreous fibers (fibrous glass), and crystalline silica. All cleaning procedures included the common elements of vacuuming and wet wiping with soap and water. This cleaning procedure combination is effective in reducing WTC-related contamination to below health-based benchmarks. Post-cleaning environmental test results suggested that airborne asbestos measurements can be used as a surrogate parameter in clearance determinations.     

Distribution of copper, lead, cadmium and zinc concentrations in soils around Kabwe town in Zambia

The extent of pollution of the environment as a result of mining activities in Kabwe, the provincial capital of Central province in Zambia has not yet been evaluated. Mining of lead and zinc were the core activities of Kabwe mine while cadmium and silver were produced as by-products. The smelting processes produced a significant amount of copper. The spatial distribution of four heavy metals in soils in the northern, eastern, southern and western directions of the mine was analyzed using atomic absorption spectrometry (AAS). Samples were collected up to 20 km in each direction from the mine. Results were consistent with the wind flow patterns in the town. Results ranged between 0.08 and 28 mg kg(-1) (Cd); 0.20 and 0.61 mg kg(-1) (Cu); 0.10 and 758 mg kg(-1) (Pb) and 0.40 and 234 mg kg(-1) (Zn) suggesting high precipitation of metals from the core mining activities. These concentrations were for only the fractions of metals extractable by 0.5M nitric acid and that could be available for plant uptake in the environment. The distribution of metals indicated a decrease of metal concentrations with distance from the mine, which confirmed that precipitation due to mining activities was the main cause of soil contamination.     

Biodegradation pathways of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) by Clostridium acetobutylicum cell-free extract

Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), a military high explosive, is becoming an increasingly important pollutant in the US. The cleanup of RDX-contaminated soil and groundwater has been a serious challenge due to its recalcitrance in the environment. This study was conducted to determine the biodegradation kinetics of RDX by crude cell extract of Clostridium acetobutylicum (ATCC 824), and to examine whether this bacterium will carry out reductive transformation pathways similar to the transformation of 2,4,6-trinitrotoluene (TNT), 2,4- and 2,6-dinitrotoluenes (DNTs) we have reported previously. Batch studies on the anaerobic transformation of RDX were conducted in serum bottles with U-ring-14C-RDX. RDX and its transformation products were quantified by HPLC and qualified by LC/ MS interfaced to two soft ionization techniques--an atmospheric pressure ionization and an electron spray ionization (API-ES). Results demonstrated that C. acetobutylicum is capable of transforming RDX with H2 as the electron donor. The transformation followed a zero-order kinetics and the rates increased with increasing H2. RDX was transformed into several polar intermediates that could not be separated by reverse-phase HPLC and its molecular ions were unstable under the condition of commonly used electron impact detector. Using a polar and water immiscible solvent (ethyl acetate) and the softer MS ionization techniques, mass spectroscopy detected the presence of several RDX derivatives including mononitroso-, monohydroxylamino-, mononitrosomonohydroxylamino-, monoamino-, diamino-, and triamino-compounds. The presence of hydroxylamino compounds is analogous to the transformation of TNT and DNTs we elucidated previously.     

A Practical Look at Environmental Audits

Company self-auditing has become an increasingly attractive option for both government and industry in achieving compliance with environmental laws. For government, it can diminish the need for continual compliance inspections, and, for industry, it can prevent substantial liability. However, auditing can be conducted in a number of ways, and it is important for company management to be aware of its options before selecting a particular approach. This is particularly true of companies with relatively limited resources for such a project. The following article describes some of the more basic options to be considered In identifying an optimal auditing strategy. It also discusses factors which may make one strategy preferable to another. The article concludes with the interesting observation that, in some cases, a formal audit may be neither necessary nor desirable.     

Correction Factors for Covariance between Concentration and Deposition Velocity on CASTNes HNO3 Deposition Estimates

The covariance between hourly concentration (C) and depositionvelocity (V) for various atmospheric species may act to bias the dry deposition (D) computed from the product of the weeklyaverage C and V. This is a potential problem for the CASTNet filter pack (FP) species, nitric acid (HNO₃). Using ozone (O₃) behavior as a surrogate for HNO₃, correctionfactors (CF) are developed to estimate this bias. Weekly CF for O₃ depend on both site and season, and seasonal average weekly CF for O₃ at a given site may be as high as 1.25.The seasonal magnitude of this CF is generally largest in summerand is ordered: summer fall spring > winter. The CF is drivento a large extent by the diurnal correlation between C andV (i.e., both are generally higher during the day and lower at night). However, since the diurnal C profile at elevated sites is relatively constant, the resulting correlation between C and V is small, and the CF at montane sites is generally negligiblysmall. The sampling protocol using daytime integrated sampling for a week and nighttime integrated sampling for a week capturesthe diurnal correlation between C and V adequately and may be used to aggregate relatively unbiased weekly D estimates. Day-night CF for O₃ are close to unity, and limited results suggest similar behavior for HNO₃. Using these limited FP results, the site- and seasonally-specific weekly CF forO₃are refined to estimate the corresponding CF for HNO₃. Worst-case adjustments for HNO₃ as high as 30% are indicated for summer periods at a given site.     

Case study of ex situ remediation and conversion to a combined in situ/ex situ bioremediation approach at an oxygenated gasoline release site

In response to an oxygenated gasoline release at a gas station site in New Hampshire, a temporary treatment system consisting of a single bedrock extraction well, a product recovery pump, an air stripper, and carbon polishing units was installed. However, this system was ineffective at removing tertiary butyl alcohol from groundwater. The subsequent remedial system design featured multiple bedrock extraction wells and an ex situ treatment system that included an air stripper, a fluidized bed bioreactor, and carbon polishing units. Treated effluent was initially discharged to surface water. Periodic evaluation of the remediation system performance led to system modifications, which included installing an additional extraction well to draw contaminated groundwater away from an on‐site water supply well, adding an iron and manganese pretreatment system, and discharge of treated effluent to an on‐site drywell. Later, the air stripper and carbon units were eliminated, and an infiltration gallery was installed to receive treated, oxygenated effluent in order to promote flushing of the smear zone and in situ bioremediation in the source area. This article discusses the design, operation, performance, and modifications to the remediation system over time, and provides recommendations for similar sites. © 2007 Wiley Periodicals, Inc.     

Evaluation of natural attenuation at a 1,4‐dioxane‐contaminated site

1,4‐Dioxane entered the environment as a result of historic leaks and spills in the production area at an industrial facility in the southeastern coastal plain. The areal extent of the 1,4‐dioxane plume is several hundred acres and is largely contained on the site. Land use adjacent to the plant property is primarily undeveloped (wetlands or woods) or industrial, with a small area of mixed land use (commercial/residential) to the southwest and north. The surficial aquifer is a relatively simple hydrogeologic system with well‐defined boundaries and is comprised of a 50‐ to 70‐foot‐thick deposit of alluvial/fluvial sand and gravel that overlies an aquitard in excess of 100 feet thick. A groundwater flow model, developed and calibrated using field‐measured data, was used for the fate‐and‐transport modeling of 1,4‐dioxane. The flow‐and‐transport model, combined with the evaluation of other site geochemical data, was used to support the selection of monitored natural attenuation (MNA) as the proposed groundwater remedy for the site. Since the active sources of contamination have been removed and the modeling/field data demonstrated that the plume was stable and not expanding, the proposed MNA approach was accepted and approved by the regulatory agency for implementation in 2004. Subsequent accumulated data confirm that concentrations in the 1,4‐dioxane plume are declining as predicted by the fate‐and‐transport modeling. © 2008 Wiley Periodicals, Inc.     

A New Polymer Platform for the Future — Sorona<Superscript>®</Superscript> from Corn Derived 1,3-Propanediol

Responding to environmental, sustainability, business, and market factors, DuPont has commercialized a new polymer platform, Sorona®, based on 1,3-propanediol. The physical and chemical property advantages over other polymers are described. The diol component of this polymer, 1,3-propanediol, has been demonstrated to be manufacturable via biological (fermentation) process from corn sugar. The economic, environmental, and process/product quality advantages of bio-PDO over conventional diols are discussed.     

Microbial nitrogen limitation increases decomposition

With anthropogenic nutrient inputs to ecosystems increasing globally, there are long-standing, fundamental questions about the role of nutrients in the decomposition of organic matter. We tested the effects of exogenous nitrogen and phosphorus inputs on litter decomposition across a broad suite of litter and soil types. In one experiment, C mineralization was compared across a wide array of plants individually added to a single soil, while in the second, C mineralization from a single substrate was compared across 50 soils. Counter to basic stoichiometric decomposition theory, low N availability can increase litter decomposition as microbes use labile substrates to acquire N from recalcitrant organic matter. This "microbial nitrogen mining" is consistently suppressed by high soil N supply or substrate N concentrations. There is no evidence for phosphorus mining as P fertilization increases short- and long-term mineralization. These results suggest that basic stoichiometric decomposition theory needs to be revised and ecosystem models restructured accordingly in order to predict ecosystem carbon storage responses to anthropogenic changes in nutrient availability.