Diurnal changes in photosynthetic parameters of Populus tremuloides, modulated by elevated concentrations of CO2 and/or O3 and daily climatic variation

The diurnal changes in light-saturated photosynthesis (Pn) under elevated CO₂ and/or O₃ in relation to stomatal conductance (g_s), water potential, intercellular [CO₂], leaf temperature and vapour-pressure difference between leaf and air (VPD_L) were studied at the Aspen FACE site. Two aspen (Populus tremuloides Michx.) clones differing in their sensitivity to ozone were measured. The depression in Pn was found after 10:00 h. The midday decline in Pn corresponded with both decreased g_s and decreased Rubisco carboxylation efficiency, Vc_max. As a result of increasing VPD_L, g_s decreased. Elevated [CO₂] resulted in more pronounced midday decline in Pn compared to ambient concentrations. Moreover, this decline was more pronounced under combined treatment compared to elevated CO₂ treatment.The positive impact of CO₂ on Pn was relatively more pronounced in days with environmental stress but relatively less pronounced during midday depression. The negative impact of ozone tended to decrease in both cases.     

Differential response of aspen and birch trees to heat stress under elevated carbon dioxide

The effect of high temperature on photosynthesis of isoprene-emitting (aspen) and non-isoprene-emitting (birch) trees were measured under elevated CO₂ and ambient conditions. Aspen trees tolerated heat better than birch trees and elevated CO₂ protected photosynthesis of both species against moderate heat stress. Elevated CO₂ increased carboxylation capacity, photosynthetic electron transport capacity, and triose phosphate use in both birch and aspen trees. High temperature (36-39 °C) decreased all of these parameters in birch regardless of CO₂ treatment, but only photosynthetic electron transport and triose phosphate use at ambient CO₂ were reduced in aspen. Among the two aspen clones tested, 271 showed higher thermotolerance than 42E possibly because of the higher isoprene-emission, especially under elevated CO₂. Our results indicate that isoprene-emitting trees may have a competitive advantage over non-isoprene emitting ones as temperatures rise, indicating that biological diversity may be affected in some ecosystems because of heat tolerance mechanisms.     

Batch reactor kinetic studies on the reductive dechlorination of chlorinated ethylenes by tetrakis-(4-sulfonatophenyl)porphyrin cobalt

Tetrakis-(4-sulfonatophenyl)porphyrin cobalt was identified as a highly-active reductive dechlorination catalyst for chlorinated ethylenes. Through batch reactor kinetic studies, degradation of chlorinated ethylenes proceeded in a step-wise fashion with the sequential replacement of Cl by H. For perchloroethylene (PCE) and trichloroethylene (TCE), the dechlorination products were quantified and the C₂ mass was accounted for. Degradation of the chlorinated ethylenes was found to be first-order in substrate. Dechlorination trials with increasing catalyst concentration showed a linearly increasing pseudo first-order rate constant which yielded rate laws for PCE and TCE degradation that are first-order in catalyst. The dechlorination activity of this catalyst was compared to that of another water-soluble cobalt porphyrin under the same reaction conditions and found to be comparable for PCE and TCE.     

The impact of EDTA on the rate of accumulation and root/shoot partitioning of cadmium in mature dwarf sunflowers

In addition to increasing the mobility of metal ions in the soil solution, chelating agents such as EDTA have been reported to alter both the total metal accumulated by plants and its distribution within the plant structures. Here, mature Mini-Sun Hybrid dwarf sunflowers exposed to 300 μM Cd²⁺ in hydroponic solution had initial translocation rates of at least 0.12 mmol kg⁻¹ h⁻¹ and reached leaf saturation levels within a day when a 3-fold molar excess of EDTA was used. EDTA also promoted cadmium transfer from roots to the shoots. A threefold excess of EDTA increased the translocation factor (TF) 100-fold, resulting in cadmium levels in the leaves of 580 μg g⁻¹ and extracting 1400 μg plant⁻¹. When plants were exposed to dissolved cadmium without EDTA, the vast majority of the metal remained bound to the exterior of the root. The initial accumulation could be successfully modeled with a standard biosorption pseudo second-order kinetic equation. Initial accumulation rates ranged from 0.0359 to 0.262 mg g⁻¹ min⁻¹. The cadmium binding could be cycled, and did not show evidence of saturation under the experimental conditions employed, suggesting it might be a viable biosorbant for aqueous cadmium.     

Spatial Analysis of Soil Erosion and Sediment Fluxes: A Paired Watershed Study of Two Rappahannock River Tributaries, Stafford County, Virginia

Soil erosion is a serious problem in areas with expanding construction, agricultural production, and improper storm water management. It is important to understand the major processes affecting sediment delivery to surficial water bodies in order to tailor effective mitigation and outreach activities. This study analyzes how naturally occurring and anthropogenic influences, such as urbanization and soil disturbance on steep slopes, are reflected in the amount of soil erosion and sediment delivery within sub-watershed-sized areas. In this study, two sub-watersheds of the Rappahannock River, Horsepen Run and Little Falls Run, were analyzed using the Revised Universal Soil Loss Equation (RUSLE) and a sediment delivery ratio (SDR) to estimate annual sediment flux rates. The RUSLE/SDR analyses for Horsepen Run and Little Falls Run predicted 298 Mg/y and 234 Mg/y, respectively, but nearly identical per-unit-area sediment flux rates of 0.15 Mg/ha/y and 0.18 Mg/ha/y. Suspended sediment sampling indicated greater amounts of sediment in Little Falls Run, which is most likely due to anthropogenic influences. Field analyses also suggest that all-terrain vehicle crossings represent the majority of sediment flux derived from forested areas of Horsepen Run. The combined RUSLE/SDR and field sampling data indicate that small-scale anthropogenic disturbances (ATV trails and construction sites) play a major role in overall sediment flux rates for both basins and that these sites must be properly accounted for when evaluating sediment flux rates at a sub-watershed scale.     

Grazed Riparian Management and Stream Channel Response in Southeastern Minnesota (USA) Streams

The U.S. Department of Agriculture-Natural Resources Conservation Service has recommended domestic cattle grazing exclusion from riparian corridors for decades. This recommendation was based on a belief that domestic cattle grazing would typically destroy stream bank vegetation and in-channel habitat. Continuous grazing (CG) has caused adverse environmental damage, but along cohesive-sediment stream banks of disturbed catchments in southeastern Minnesota, short-duration grazing (SDG), a rotational grazing system, may offer a better riparian management practice than CG. Over 30 physical and biological metrics were gathered at 26 sites to evaluate differences between SDG, CG, and nongrazed sites (NG). Ordinations produced with nonmetric multidimensional scaling (NMS) indicated a gradient with a benthic macroinvertebrate index of biotic integrity (IBI) and riparian site management; low IBI scores associated with CG sites and higher IBI scores associated with NG sites. Nongrazed sites were associated with reduced soil compaction and higher bank stability, as measured by the Pfankuch stability index; whereas CG sites were associated with increased soil compaction and lower bank stability, SDG sites were intermediate. Bedrock geology influenced NMS results: sites with carbonate derived cobble were associated with more stable channels and higher IBI scores. Though current riparian grazing practices in southeastern Minnesota present pollution problems, short duration grazing could reduce sediment pollution if managed in an environmentally sustainable fashion that considers stream channel response.     

Land-Use Planning in the Chaco Plain (Burruyacú, Argentina). Part 1: Evaluating Land-Use Options to Support Crop Diversification in an Agricultural Frontier Area Using Physical Land Evaluation

The Burruyacú district (Tucumán province, Argentina) is a farming frontier in the western Chaco plain, at the foothills of the sub-Andean mountain ranges, where agricultural land-uses are in conflict with the conservation and management of the Chaco forest. Over the last decades, large-scale farming rapidly expanded due to population pressure, attractive market prices, easy accessibility, favourable annual rainfall, fertile soils, and flexible land tenure. Cropland extension, mainly for heavily mechanized soybean production, has resulted in important reduction of the Chaco forest and also caused physical soil degradation, especially soil compaction, and soil erosion. Land suitability was assessed using the Food and Agriculture Organization (FAO) framework for a set of crops ecologically adapted to the area, including soybean, maize, wheat, sugarcane, citrus, and safflower. Only 16% of the study area has high suitability for most of the selected crops. Major limitations for cropping are low annual rainfall and flooding in the east of the study area, and topography (slope) and flooding in the west. As climate varies over relatively short periods of time, with recurrent cycles of dry and rainy years, land suitability for the selected crops was also assessed under extreme but realistic climatic conditions. Under rainy-year conditions, almost all the study area is unsuitable or marginally suitable for most of the crops. Under dry-year conditions, the study area is unsuitable for all crops, except safflower, which is more drought-resistant. This article proposes alternatives to the mono-cropping of soybean with the aim to help farmers make adequate decisions on land-use and management under deteriorating environmental conditions and for addressing the issue of competitive land uses in the context of land-use planning.     

Assessing nitrogen and phosphorus removal potential of five plant species in floating treatment wetlands receiving simulated nursery runoff

The feasibility of using floating treatment wetlands (FTWs) to treat runoff typical of commercial nurseries was investigated using two 8-week trials with replicated mesocosms. Plants were supported by Beemat rafts. Five monoculture treatments of Agrostis alba (red top), Canna × generalis ‘Firebird’ (canna lily), Carex stricta (tussock sedge), Iris ensata ‘Rising Sun’ (Japanese water iris), Panicum virgatum (switchgrass), two mixed species treatments, and an unplanted control were assessed. These plant species are used for ornamental, wetland, and biofuel purposes. Nitrogen (N) and phosphorus (P) removals were evaluated after a 7-day hydraulic retention time (HRT). N removal (sum of ammonium-N, nitrate-N, and nitrite-N) from FTW treatments ranged from 0.255 to 0.738 g·m^?2·d^?1 (38.9 to 82.4% removal) and 0.147 to 0.656 g·m^?2·d^?1 (12.9 to 59.6% removal) for trials 1 and 2, respectively. P removal (phosphate-P) ranged from 0.052 to 0.128 g·m^?2·d^?1 (26.1 to 64.7% removal) for trial 1, and 0.074 to 0.194 g·m^?2·d^?1 (26.8 to 63.2% removal) for trial 2. Panicum virgatum removed more N and P than any other FTW treatment and the control in both trials. Results show that species selection and timing of FTW harvest impact the rate and mass of nutrient remediation. FTWs can effectively remove N and P from runoff from commercial nurseries.

     

Characterization of methane emissions from five cold heavy oil production with sands (CHOPS) facilities

Cold heavy oil production with sands (CHOPS) is a common oil extraction method in the Canadian provinces of Alberta and Saskatchewan that can result in significant methane emissions due to annular venting. Little is known about the magnitude of these emissions, nor their contributions to the regional methane budget. Here the authors present the results of field measurements of methane emissions from CHOPS wells and compare them with self-reported venting rates. The tracer ratio method was used not only to analyze total site emissions but at one site it was also used to locate primary emission sources and quantify their contributions to the facility-wide emission rate, revealing the annular vent to be a dominant source. Emissions measured from five different CHOPS sites in Alberta showed large discrepancies between the measured and reported rates, with emissions being mainly underreported. These methane emission rates are placed in the context of current reporting procedures and the role that gas-oil ratio (GOR) measurements play in vented volume estimates. In addition to methane, emissions of higher hydrocarbons were also measured; a chemical “fingerprint” associated with CHOPS wells in this region reveals very low emission ratios of ethane, propane, and aromatics versus methane. The results of this study may inform future studies of CHOPS sites and aid in developing policy to mitigate regional methane emissions.

Implications: Methane measurements from cold heavy oil production with sand (CHOPS) sites identify annular venting to be a potentially major source of emissions at these facilities. The measured emission rates are generally larger than reported by operators, with uncertainty in the gas-oil ratio (GOR) possibly playing a large role in this discrepancy. These results have potential policy implications for reducing methane emissions in Alberta in order to achieve the Canadian government’s goal of reducing methane emissions by 40–45% below 2012 levels within 8 yr.