Contribution of precursor compounds to the release of per- and polyfluoroalkyl substances (PFASs) from waste water treatment plants (WWTPs)

Per-and polyfluoroalkyl substances(PFASs) are ubiquitous in sludge and water from waste water treatment plants, as a result of their incorporation in everyday products and industrial processes. In this study, we measured several classes of persistent PFASs,precursors, transformation intermediates, and newly identified PFASs in influent and effluent sewage water and sludge from three municipal waste water treatment plants in Sweden, sampled in 2015. For sludge, samples from 2012 and 2014 were analyzed as well.Levels of precursors in sludge exceeded those of perfluoroalkyl acids and sulfonic acids(PFCAs and PFSAs), in 2015 the sum of polyfluoroalkyl phosphoric acid esters(PAPs) were 15–20 ng/g dry weight, the sum of fluorotelomer sulfonic acids(FTSAs) was 0.8–1.3 ng/g,and the sum of perfluorooctane sulfonamides and ethanols ranged from non-detected to 3.2 ng/g. Persistent PFSAs and PFCAs were detected at 1.9–3.9 ng/g and 2.4–7.3 ng/g dry weight, respectively. The influence of precursor compounds was further demonstrated by an observed substantial increase for a majority of the persistent PFCAs and PFSAs in water after waste water treatment. Perfluorohexanoic acid(PFHxA), perfluorooctanoic acid(PFOA), perfluorohexane sulfonic acid(PFHxS), and perfluorooctane sulfonic acid(PFOS)had a net mass increase in all WWTPs, with mean values of 83%, 28%, 37% and 58%,respectively. The load of precursors and intermediates in influent water and sludge combined with net mass increase support the hypothesis that degradation of precursor compounds is a significant contributor to PFAS contamination in the environment.     

Identification of structural breaks in the forest product markets: how sensitive are to changes in the Nordic region?

Forests play a fundamental role in the global carbon cycle and can be managed to mitigate greenhouse gas emissions and conserve or sequester carbon. Global policy and environmental changes can affect regional consumption of forest products, as well as inter-regional trade of forest goods and services. This study analyzes global and regional change impacts on the production, consumption and trade of forest products in two Nordic countries, Finland and Sweden. Annual data on removal and trade (1964–2012) for roundwood and sawnwood is used to identify structural breaks based on Chow tests. According to the analysis, the time period is divided into two periods: t1 (1964–1980) and t2 (1981–2012). In the first period, breaks occurred in 1975 and 1976 in the Finnish model and no break is found in the Swedish model. In the second period, we identify breaks in 1991 and 1992 for the Finnish model and in 2004, 2005 and 2006 for the Swedish model. Although our findings have broad empirical support, we do not identify any specific incident as a direct cause of the changes in the consumption and trade patterns of the two types of wood in these countries. The models and analysis presented here can serve as methodological tools for policymakers to better understand the effects of structural changes in the production of forest goods and services in the Nordic region and globally.     

Using vertebrate environmental DNA from seawater in biomonitoring of marine habitats

Conservation and management of marine biodiversity depends on biomonitoring of marine habitats, but current approaches are resource-intensive and require different approaches for different organisms. Environmental DNA (eDNA) extracted from water samples is an efficient and versatile approach to detecting aquatic animals. In the ocean, eDNA composition reflects local fauna at fine spatial scales, but little is known about the effectiveness of eDNA-based monitoring of marine communities at larger scales. We investigated the potential of eDNA to characterize and distinguish marine communities at large spatial scales by comparing vertebrate species composition among marine habitats in Qatar, the Arabian Gulf (also known as the Persian Gulf), based on eDNA metabarcoding of seawater samples. We conducted species accumulation analyses to estimate how much of the vertebrate diversity we detected. We obtained eDNA sequences from a diverse assemblage of marine vertebrates, spanning 191 taxa in 73 families. These included rare and endangered species and covered 36% of the bony fish genera previously recorded in the Gulf. Sites of similar habitat type were also similar in eDNA composition. The species accumulation analyses showed that the number of sample replicates was insufficient for some sampling sites but suggested that a few hundred eDNA samples could potentially capture >90% of the marine vertebrate diversity in the study area. Our results confirm that seawater samples contain habitat-characteristic molecular signatures and that eDNA monitoring can efficiently cover vertebrate diversity at scales relevant to national and regional conservation and management.     

Getting caught up in the game: managing non-formal dynamics in the remediation of contaminated sediments in Oslo harbor

This study aims at describing, analyzing and evaluating the relation between management styles and process dynamics of a complex planning process confronted with unexpected dynamics. The development of an aquatic disposal site for dredged contaminated sediments in Oslo was managed by a project management style focused on timely and cost-effective implementation. Coupling the remediation project with another infrastructural project and the actual construction of the site led to unexpected dynamics in terms of resistance and controversy. Project management had difficulties in adjusting its style accordingly, resulting in even more delay and resistance. Managing complex planning projects requires a style suitable to the characteristics of the project and the capability of adjusting it to changing circumstances. The paper concludes with some explanations why it is difficult to change management styles in complex planning and implementation processes and complexity-embracing approaches to deal with this.     

Challenges in quantifying biosphere-atmosphere exchange of nitrogen species

Recent research in nitrogen exchange with the atmosphere has separated research communities according to N form. The integrated perspective needed to quantify the net effect of N on greenhouse-gas balance is being addressed by the NitroEurope Integrated Project (NEU). Recent advances have depended on improved methodologies, while ongoing challenges include gas-aerosol interactions, organic nitrogen and N(2) fluxes. The NEU strategy applies a 3-tier Flux Network together with a Manipulation Network of global-change experiments, linked by common protocols to facilitate model application. Substantial progress has been made in modelling N fluxes, especially for N(2)O, NO and bi-directional NH(3) exchange. Landscape analysis represents an emerging challenge to address the spatial interactions between farms, fields, ecosystems, catchments and air dispersion/deposition. European up-scaling of N fluxes is highly uncertain and a key priority is for better data on agricultural practices. Finally, attention is needed to develop N flux verification procedures to assess compliance with international protocols.     

Changes in the heavy metal and nutrient contents of dried feather mosses during long-term storage

This study measured heavy metal and nutrient concentrations of two feather mosses during the periods of dry storage. Samples (Hylocomium splendens, Pleurozium schreberi) were collected in the nationwide moss surveys carried out on the permanent sample plots of the 8th Finnish National Forest Inventory in 1985–86, 1990, 1995 and 2000. A small amount of each moss sample was analyzed soon after collection, and the remainder was dried and stored at the Paljakka environmental specimen bank (ESB). The 108 stored samples from 27 plots were reanalyzed in 2008. Concentrations of heavy metals (Cd, Cr, Cu, Fe, Ni, Pb, Zn) and nutrients (Ca, K, Mg, P) were determined and compared for each survey year. Overall, Fe, Pb and Cr concentrations decreased, and Cu concentrations increased significantly during storage. The greatest decrease was observed in samples from plots where their initial concentrations were the highest. Changes in the concentrations of Cd, Ni and Zn were less pronounced. The loss of heavy metals is likely due to drying when cell membranes rupture and some of the surface material is lost. K, P and, to some extent, Mg concentrations increased during storage, whereas Ca did not change significantly. Nutrient increase is probably due to their movement from older to younger growths during the initial phase of drying. Ca is mostly bound to cell walls and is not easily released. Results emphasize the importance of establishing the intended use of a stored moss prior to sampling, in order to select and optimize an appropriate storage technique.     

Dielectric properties of MSWI bottom ash for non-invasive monitoring of moisture

The dielectric procperties of MSWI bottom ash as a function of volumetric water content (VWC) are reported in this paper. The objective was to aid the development of microwave based non-invasive emission monitoring and control system for various bottom ash applications. The dielectric measurements were made, on a 1.5-year-old bottom ash, with an electrical network analyzer in microwave range (300 MHz–1.5 GHz). The VWC of the samples ranged between 0.05 and 0.40 m³?m^?3. The relationship between the dielectric permittivity and the VWC was modeled with an empirical model and a physically based Birchak model (BM). The results showed that a linear relationship existed between the permittivity and the VWC at higher water contents (>0.25 m³?m^?3). However, at lower water contents (<0.25 m³?m^?3), the relationship between the permittivity and the WVC was affected by the composition of the bottom ash. The permittivity measurement, with the current method, was not affected by high salt concentrations (10 and 20 dS/m). The empirical model, as compared to BM, provided the best fit between the actual and the predicted water content. The root mean square error (RMSE) values were 0.008–0.010 and 0.06–0.09 m³?m^?3 for the empirical and the Birchak model, respectively.     

An economic-environmental analysis of selected barrier-coating materials used in packaging food products: a Swedish case study

The purpose of a barrier coating in food packaging is primarily to increase the shelf life of the foodstuff contained within the packaging, preserve its colour, odour, taste and quality, and thereby reduce food wastage (both at retail outlets and households). While most publications hitherto have compared packaging and barrier-coating materials on the basis of their environmental impacts alone, this paper adopts a more holistic approach by factoring in the economic aspect as well. Four barrier material alternatives—starch, polyethylene, EVOH + kaolin and latex + kaolin are analysed. Two well-defined end-of-life handling scenarios, relevant to Sweden, are: one in which everything except starch is recycled, with starch being composted, and the other in which everything is incinerated. Among the several environmental impact categories which can be analysed, this paper considers only global warming. Two approaches are tested to combine the economic and environmental aspects—normalisation, weighting and aggregating on the one hand, and using the carbon tax to internalise the externality caused by GHG emissions on the other. For the set of weighting factors obtained thanks to a survey conducted by the authors (40.6% for environmental and 59.4% for economic), starch emerges as the most sustainable alternative, followed by polyethylene for both the end-of-life handling scenarios. This tallies with the result obtained by using the carbon tax for internalisation of the externality. The case study, methodology and results presented in this paper, will hopefully be a springboard for more detailed studies of this nature, under the umbrella of sustainability.     

Transforming systems of consumption and production for achieving the sustainable development goals: moving beyond efficiency

The United Nations formulated the sustainable development goals (SDGs) in 2015 as a comprehensive global policy framework for addressing the most pressing social and environmental challenges currently facing humanity. In this paper, we analyse SDG 12, which aims to “ensure sustainable consumption and production patterns.” Despite long-standing political recognition of this objective, and ample scientific evidence both on its importance and on the efficacy of various ways of promoting it, the SDGs do not provide clear goals or effective guidance on how to accomplish this urgently needed transformation. Drawing from the growing body of research on sustainable consumption and production (SCP), the paper identifies two dominant vantage points—one focused on promoting more efficient production methods and products (mainly through technological improvement and informed consumer choice) and the other stressing the need to consider also overall volumes of consumption, distributional issues, and related social and institutional changes. We label these two approaches efficiency and systemic. Research shows that while the efficiency approach contains essential elements of a transition to sustainability, it is by itself highly unlikely to bring about sustainable outcomes. Concomitantly, research also finds that volumes of consumption and production are closely associated with environmental impacts, indicating a need to curtail these volumes in ways that safeguard social sustainability, which is unlikely to be possible without a restructuring of existing socioeconomic arrangements. Analysing how these two perspectives are reflected in the SDGs framework, we find that in its current conception, it mainly relies on the efficiency approach. On the basis of this assessment, we conclude that the SDGs represent a partial and inadequate conceptualisation of SCP which will hamper implementation. Based on this determination, this paper provides some suggestions on how governments and other actors involved in SDGs operationalisation could more effectively pursue SCP from a systemic standpoint and use the transformation of systems of consumption and production as a lever for achieving multiple sustainability objectives.