Long-range transport of acidifying substances in East Asia—Part II: Source–receptor relationships

Region-to-grid source–receptor (S/R) relationships are established for sulfur and reactive nitrogen deposition in East Asia, using the Eulerian-type Community Multiscale Air Quality (CMAQ) model with emission and meteorology data for 2001. We proposed a source region attribution methodology by analyzing the non-linear responses of the CMAQ model to emission changes. Sensitivity simulations were conducted where emissions of SO₂, NO_x, and primary particles from a source region were reduced by 25%. The difference between the base and sensitivity simulations was multiplied by a factor of four, and then defined as the contribution from that source region. The transboundary influence exhibits strong seasonal variation and generally peaks during the dry seasons. Long-range transport from eastern China contributes a significant percentage (>20%) of anthropogenic reactive nitrogen as well as sulfur deposition in East Asia. At the same time, northwestern China receives approximately 35% of its sulfur load and 45% of its nitrogen load from foreign emissions. Sulfur emissions from Miyakejima and other volcanoes contribute approximately 50% of the sulfur load in Japan in 2001. Sulfur inflows from regions outside the study domain, which is attributed by using boundary conditions derived from the MOZART global atmospheric chemistry model, are pronounced (10–40%) over most parts of Asia. Compared with previous studies using simple Lagrangian models, our results indicate higher influence from long-range transport. The estimated S/R relationships are believed to be more realistic since they include global influence as well as internal interactions among different parts of China.     

Swedish survey on extra structurally abnormal chromosomes in 39 105 consecutive prenatal diagnoses: Prevalence and characterization by fluorescence in situ hybridization

During 7 years (1985–1992), 39 105 consecutive prenatal diagnoses (34 908 amniocenteses and 4197 chorionic villus samples) were made at the five largest clinical genetic laboratories in Sweden. Thirty-one cases of extra structurally abnormal chromosomes (ESACs) were found, giving a total prevalence of 0·8 per 1000. Twelve ESACs were inherited, 14 were de novo and in five the parental origin was unknown. This gives an estimated prevalence of 0·3–0·4 per 1000 for familial and 0·4–0·5 per 1000 for de novo ESACs. Retrospectively, the ESACs were characterized by fluorescence in situ hybridization (FISH). In nine cases, no material was available for this analysis. In 21 of the remaining 22 cases, the chromosomal origin could be identified by FISH. Seventeen of these (81 per cent) were derived from the acrocentric chromosomes, of which 13 originated from chromosome 15 (62 per cent). The most common ESAC was the inv dup(15) (57 per cent). Two cases were derived from chromosome 22, one from chromosome 14, and one from either chromosome 13 or chromosome 21. The four remaining cases consisted to two i(18p)s and two small ring chromosomes derived from chromosomes 4 and 19, respectively.     

DNA damage in workers exposed to formaldehyde at concentrations below occupational exposure limits

Formaldehyde has been classified in group 1 as a potential source of human carcinogen by the International Agency for Research on Cancer. In this study, we evaluated the DNA damage in workers who were occupationally exposed to formaldehyde during the manufacture of melamine dinnerware.

Age, sex, smoking habits, and socioeconomic status were matched by the controls (n = 34) of workers not occupationally exposed to formaldehyde. The median value of formaldehyde time weighted average exposure in three workshops was 0.086 mg/m³. No significant difference was observed between sex and smoking habit in the assessed workers. Alkaline comet assay of peripheral blood lymphocytes was used to determine the DNA damage in the subjects. Olive moment was significantly higher in the exposed group compared with the control group.

Overall, the results suggest that respiratory exposure to low concentrations of formaldehyde causes DNA damage in peripheral blood lymphocyte. Therefore, exposure to formaldehyde should be reduced to the lowest possible level.     

An expanded conceptual framework for solution-focused management of chemical pollution in European waters

Background

This paper describes a conceptual framework for solutions-focused management of chemical contaminants built on novel and systematic approaches for identifying, quantifying and reducing risks of these substances.

Methods

The conceptual framework was developed in interaction with stakeholders representing relevant authorities and organisations responsible for managing environmental quality of water bodies. Stakeholder needs were compiled via a survey and dialogue. The content of the conceptual framework was thereafter developed with inputs from relevant scientific disciplines.

Results

The conceptual framework consists of four access points: Chemicals, Environment, Abatement and Society, representing different aspects and approaches to engaging in the issue of chemical contamination of surface waters. It widens the scope for assessment and management of chemicals in comparison to a traditional (mostly) perchemical risk assessment approaches by including abatement- and societal approaches as optional solutions. The solution-focused approach implies an identification of abatement- and policy options upfront in the risk assessment process. The conceptual framework was designed for use in current and future chemical pollution assessments for the aquatic environment, including the specific challenges encountered in prioritising individual chemicals and mixtures, and is applicable for the development of approaches for safe chemical management in a broader sense. The four access points of the conceptual framework are interlinked by four key topics representing the main scientific challenges that need to be addressed, i.e.: identifying and prioritising hazardous chemicals at different scales; selecting relevant and efficient abatement options; providing regulatory support for chemicals management; predicting and prioritising future chemical risks. The conceptual framework aligns current challenges in the safe production and use of chemicals. The current state of knowledge and implementation of these challenges is described.

Conclusions

The use of the conceptual framework, and addressing the challenges, is intended to support: (1) forwarding sustainable use of chemicals, (2) identification of pollutants of priority concern for cost-effective management, (3) the selection of optimal abatement options and (4) the development and use of optimised legal and policy instruments.

     

Evaluation of the European population intake fractions for European and Finnish anthropogenic primary fine particulate matter emissions

The intake fraction (iF) has been defined as the integrated incremental intake of a pollutant released from a source category or region summed over all exposed individuals. In this study we evaluated the iFs in the population of Europe for emissions of anthropogenic primary fine particulate matter (PM_2.5) from sources in Europe, with a more detailed analysis of the iF from Finnish sources. Parameters for calculating the iFs include the emission strengths, the predicted atmospheric concentrations, European population data, and the average breathing rate per person. Emissions for the whole of Europe and Finland were based on the inventories of the European Monitoring and Evaluation Programme (EMEP) and the Finnish Regional Emission Scenario (FRES) model, respectively. The atmospheric dispersion of primary PM_2.5 was computed using the regional-scale dispersion model SILAM. The iFs from Finnish sources were also computed separately for six emission source categories. The iFs corresponding to the primary PM_2.5 emissions from the European countries for the whole population of Europe were generally highest for the densely populated Western European countries, second highest for the Eastern and Southern European countries, and lowest for the Northern European and Baltic countries. For the entire European population, the iF values varied from the lowest value of 0.31 per million for emissions from Cyprus, to the highest value of 4.42 per million for emissions from Belgium. These results depend on the regional distribution of the population and the prevailing long-term meteorological conditions. Regarding Finnish primary PM_2.5 emissions, the iF was highest for traffic emissions (0.68 per million) and lowest for major power plant emissions (0.50 per million). The results provide new information that can be used to find the most cost-efficient emission abatement strategies and policies.     

Comparison of particle emissions from small heavy fuel oil and wood-fired boilers

Flue gas emissions of wood and heavy fuel oil (HFO) fired district heating units of size range 4–15 MW were studied. The emission measurements included analyses of particle mass, number and size distributions, particle chemical compositions and gaseous emissions. Thermodynamic equilibrium calculations were carried out to interpret the experimental findings.In wood combustion, PM1 (fine particle emission) was mainly formed of K, S and Cl, released from the fuel. In addition PM1 contained small amounts of organic material, CO₃, Na and different metals of which Zn was the most abundant. The fine particles from HFO combustion contained varying transient metals and Na that originate from the fuel, sulphuric acid, elemental carbon (soot) and organic material. The majority of particles were formed at high temperature (>800 °C) from V, Ni, Fe and Na. At the flue gas dew point (125 °C in undiluted flue gas) sulphuric acid condensed forming a liquid layer on the particles. This increases the PM1 substantially and may lead to partial dissolution of the metallic cores.Wood-fired grate boilers had 6–21-fold PM1 and 2–23-fold total suspended particle (TSP) concentrations upstream of the particle filters when compared to those of HFO-fired boilers. However, the use of single field electrostatic precipitators (ESP) in wood-fired grate boilers decreased particle emissions to same level or even lower as in HFO combustion. On the other hand, particles released from the HFO boilers were clearly smaller and higher in number concentration than those of wood boilers with ESPs. In addition, in contrast to wood combustion, HFO boilers produce notable SO₂ emissions that contribute to secondary particle formation in the atmosphere. Due to vast differences in concentrations of gaseous and particle emissions and in the physical and chemical properties of the particles, HFO and wood fuel based energy production units are likely to have very different effects on health and climate.     

A case study on raw material blending for the recycling of ferrous wastes in a blast furnace

The utilisation of ferrous wastes in a blast furnace is a well established recycling process to cope with the enormous amounts of ferrous residues in the iron and steel industry. The further input flows of this process, that is especially coke and fluxes, as well as its output flows, that is pig iron and by-products, are highly dependent on the blending of the ferrous wastes while they differ highly in the revenues gained for the treatment and their chemical composition. So far, no planning approach exists for the blending of the residues on the operational planning level that models the dependency of the costs and revenues on the raw material blend and the thermodynamic reactions in the recycling processes adequately. Therefore we present an approach for this operational production planning problem focusing on an integration of such a sufficiently detailed modelling of the underlying metallurgical processes into the planning model. The basis of our approach is a thermodynamic simulation of the processes. From this simulation we derive linear input-output functions for the relevant material and energy flows by using multiple linear regression. These input–output functions form the core of our blending model developed for the planning task. The model is implemented as an integrated decision support system. Exemplary application results are given. These results validate the approach and show that ecological the economic optimisation leads also to results which are advantageous in terms of resource efficiency and emission reduction. Though developed for a specific recycling process, the methodology can be transferred to other metallurgical (recycling) processes, as well as other parts of the process industries, and is therefore of high relevance.     

Differences in stress tolerance and brood size between a non-indigenous and an indigenous gammarid in the northern Baltic Sea

Differences in stress tolerance and reproductive traits may drive the competitive hierarchy between non-indigenous and indigenous species and turn the former ones into successful invaders. In the northern Baltic Sea, the non-indigenous Gammarus tigrinus is a recent invader of littoral ecosystems and now occupies comparable ecological niches as the indigenous G. zaddachi. In laboratory experiments on specimens collected between June and August 2009 around Tvärminne in southern Finland (59°50′N/23°15′E), the tolerances towards heat stress and hypoxia were determined for the two species using lethal time, LT₅₀, as response variable. The brood size of the two species was also studied and some observations were made on maturation of juveniles. Gammarus tigrinus was more resistant to hypoxia and survived at higher temperatures than G. zaddachi. Brood size was also greater in G. tigrinus than in G. zaddachi and G. tigrinus matured at a smaller size and earlier than G. zaddachi. Hence, there are clear competitive advantages for the non-indigenous G. tigrinus compared to the indigenous G. zaddachi, and these may be further strengthened through ongoing environmental changes related to increased eutrophication and a warming climate in the Baltic Sea region.