Levels of polybrominated diphenyl ethers and hexabromocyclododecane in the atmosphere and tree bark from Beijing, China

Air samples in four seasons at one site and tree bark samples from four districts were determined to investigate seasonal variation and regional distribution of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCD) in Beijing, China. The total concentrations of PBDEs (∑PBDE) and HBCD (∑HBCD) were in the range of 57-470 and 20-1800 pg m⁻³ in the atmosphere, respectively. The ∑PBDE and ∑HBCD concentrations were significantly influenced by the total suspended particulate matter in atmosphere. The total concentrations of PBDEs and HBCD in tree bark samples were in the range of 99-3700 and 26-3400 ng g⁻¹ lipid weight. It was found that regional distribution of PBDEs and HBCD was related to the function of each district. In addition, the study found that weeping willow bark was an ideal atmospheric PBDEs and HBCD passive sampler. Finally, atmospheric levels of BDE-209 and HBCD at tree bark sampling districts were estimated via applying an established bark/air partitioning model, which had been verified by the measured concentrations in tree bark and atmosphere in Beijing.     

Tracing the sources of refractory dissolved organic matter in a large artificial lake using multiple analytical tools

Structural and chemical characteristics of refractory dissolved organic matter (RDOM) from seven different sources (algae, leaf litter, reed, compost, field soil, paddy water, treated sewage) were examined using multiple analytical tools, and they were compared with those of RDOM in a large artificial lake (Lake Paldang, Korea). Treated sewage, paddy water, and field soil were distinguished from the other sources investigated by their relatively low specific UV absorbance (SUVA) values and more pronounced fulvic-like versus humic-like fluorescence of the RDOM samples. Microbial derived RDOM from algae and treated sewage showed relatively low apparent molecular weight and a higher fraction of hydrophilic bases relative to the total hydrophilic fraction. For the biopolymer types, the presence of polyhydroxy aromatics with the high abundance of proteins was observed only for vascular plant-based RDOM (i.e., leaf litter and reed). Molecular weight values exhibited positive correlations with the SUVA and the hydrophobic content among the different RDOM, suggesting that hydrophobic and condensed aromatic structures may be the main components of high molecular weight RDOM. Principal component analysis revealed that approximately 77% of the variance in the RDOM characteristics might be explained by the source difference (i.e., terrestrial and microbial derived) and a tendency of further microbial transformation. Combined results demonstrated that the properties of the lake RDOM were largely affected by the upstream sources of field soil, paddy water, and treated sewage, which are characterized by low molecular weight UV-absorbing and non-aromatic structures with relatively high resistance to further degradation.     

Motility of Pseudomonas aeruginosa in saturated granular media as affected by chemoattractant

To examine and quantify the effects of glass beads and chemoattractant on bacterial motility in granular media, we examined the motile behavior of P. aeruginosa in a saturated granular medium and quantified the effects of glass beads and the presence of a chemoattractant. By recording individual cell trajectories in microfluidic channels under a high-speed confocal microscope, we directly measured the cell's run direction and corresponding run-length, speed and turn angle. Bacterial run speed increased in the presence of chemoattractant in both aqueous and granular media. But it decreased in glass-beads compared to in aqueous media due to the restricted pore geometry and interactions between bacteria and grain surfaces. Notably, the relatively higher frequency distribution at turn angles of 170° decreased dramatically, while the smaller peak at 70° increased and became dominant on a bimodal distribution, showing more bacteria changed directions at smaller turn angles rather than reverse their swimming directions. Additionally, the presence of glass beads also decreased the chemotactic velocity and random motility by similar proportions due to the restrictive geometry and the interactions between bacteria and glass beads surface. Our study indicates that the swimming parameters measured from aqueous media cannot be directly adopted in models for predicting bacteria travel in granular media.     

微絮凝-直接过滤工艺用于东江流域典型印染废水回用的实验研究

以东莞地区某典型印染企业尾水为研究对象,针对东江流域饮用水源河流水质污染现状及纳污河流水质改善目标要求与企业对尾水回用的实际需求,进行了印染废水深度处理回用工艺的适用性研究.通过混凝烧杯实验,选用工业PACl、FeSO4、HPAC 3种药剂,对微絮凝-直接过滤集成工艺用于印染废水尾水深度处理后水质回用的可行性,进行了实...     

基于活性污泥的厨余垃圾厌氧发酵产酸研究

以厨余垃圾和活性污泥为原料,考察了不同接种比例对厌氧发酵产物的挥发性脂肪酸产量、pH值和COD去除率的影响.结果表明,当厨余垃圾和活性污泥接种比例为4∶1时,挥发性脂肪酸产量在第3天达到最大值为42.7 g/L,产率提高了40%,COD去除率达到了35.6%,pH值没有发生较大的差异,其变化幅度在4～6之间.     

活性污泥与生物膜复合工艺处理石化废水的研究

实验研究了活性污泥与生物膜复合工艺(HP)对石化废水的处理效果,并与活性污泥工艺(ASP)进行对比研究.结果表明,HP对石化废水中COD的去除效果略好于ASP,而对NH3-N的去除效果明显优于ASP.另外,两种工艺对硫化物和油的去除效果类似.提高进水负荷时,HP表现出较强的耐冲击负荷能力.以2L/h连续运行时,石化废水...     

脱硝催化剂孔结构及其脱硝特性的研究

选择性催化还原脱硝技术(SCR)所采用的催化剂多数为多孔介质,其内部孔隙有助于提高催化剂的反应活性。文中采用浸渍负载法,通过改变制备温度制备出不同孔结构的催化剂样品,采用N2吸附法对其孔结构进行测定和分析,并对不同孔结构的催化剂样品进行了脱硝实验。研究表明:煅烧及干燥温度对催化剂孔结构有很大的影响,比表面积越大,其催化剂内的孔分布宽度越窄,平均孔径越小;在活性温度范围(360～390℃)内,脱硝过程中主要是属于化学反应过程控制,脱硝效果随着比表面积的增大而增强;在非活性温度范围内,脱硝过程同时受到气体扩散过程及化学反应过程控制。     

Determination of the residue dynamics and dietary risk of thiamethoxam and its metabolite clothianidin in citrus and soil by LC-MS/MS

A modified quick, easy, cheap, effective, rugged and safe (QuEChERS) method was developed for the determination of thiamethoxam and its metabolite clothianidin in citrus (including the whole citrus, peel and pulp) and soil samples by liquid chromatography-tandem mass spectrometry. The sample was extracted with acetonitrile and purified with octadecylsilane. The detection limits of both compounds were 0.0001–0.0002?mg kg^–1, while the limit of quantification of thiamethoxam was 0.002?mg kg^–1 and the limit of quantitation of metabolites was 0.001?mg kg^–1. The recovery was 70.37%–109.76%, with inter-day relative standard deviations (RSD) (n?=?15) values ≤9.46% for the two compounds in the four matrices. The degradation curve of thiamethoxam in whole citrus and soil was plotted using the first-order kinetic model. The half-life of the whole citrus was 1.9–6.2?days, and the half-life of the soil was 3.9–4.2?days. The terminal residue of thiamethoxam (the sum of thiamethoxam and clothianidin, expressed as thiamethoxam) was found to be concentrated on the peel. The final residual amount of thiamethoxam in the edible portion (pulp) was less than 0.061?mg kg^–1. The risk quotient values were all below 1, indicating that thiamethoxam as a citrus insecticide does not pose a health risk to humans at the recommended dosage.     

The impact of government subsidy and tax policy on the competitive decision-making of remanufacturing supply chains

In this paper, we consider a two-period competition model of a remanufacturing supply chain consisting of three members: a new product manufacturer, a recycler and a remanufacturer. The manufacturer supplies new products in the first period and the remanufacturer participates in the competition in the second period. We consider three scenarios in the second period: (1) there is no government subsidy in the competition; (2) there is only government subsidy in the competition; (3) there are both government subsidy and tax in the competition. First, we give the optimal decision-making of the manufacturer, the remanufacturer and the government in the three scenarios; second, we analyse changes in the decision-making of the manufacturer and remanufacturer in the three scenarios and compare their results. We analyse the effects of government subsidy and tax and their asymmetric use on manufacturers’ and remanufacturers’ decision-making variables and competitive performance. We also take consumer awareness of environmental protection into account and examine its impact on subjects’ decisions. Lastly, we operate a numerical example to show the results.     

吹扫捕集-气相色谱法测定汽油类有机物

采用吹扫-捕集富集、DB624毛细管柱分离,气相色谱FID检测汽油类化合物,使用4-溴氟苯代用品标准作为质量控制物质,保证了测定全过程处于受控之中。该法具有较高的灵敏度和良好的线性关系,应用于实际样品的分析,水样中汽油检测限0．04mg／L,土样的汽油检测限为2．2mg／kg。回收率在92％～105％之间。相对标准差为2．5％,分析结果令人满意。