我国不锈钢制品与铝制品行业进展与趋势

对不锈钢制品和铝制品行业的进展进行了分析 ,并对其发展趋势进行了预测     

Enhanced removal of lead(II) and cadmium(II) from water in alum coagulation by ferrate(VI) pretreatment.

A laboratory study demonstrated that ferrate pretreatment significantly enhanced lead and cadmium removal in alum coagulation, under the conditions of natural surface water. The enhancement of lead removal was approximately 21 to 37% by ferrate pretreatment at a dosage of 1 to 5 mg/L. The enhanced removal of cadmium by ferrate pretreatment at a dosage of 1 to 5 mg/L exceeded the removal by alum coagulation alone 2-to 12-fold. Cadmium is much more difficult to remove than lead in alum coagulation. The performance of ferrate in enhancing the removal of lead and cadmium in alum coagulation was better than that of ferric chloride. The removal of lead and cadmium was highly pH-dependent, following the general trend of higher pH being related to higher removal. Satisfactory removal of cadmium could be expected by ferrate pretreatment combined with adjusting the pH of the water.     

Influence of hydrogeochemical processes on zero-valent iron reactive barrier performance: a field investigation

Geochemical and mineralogical changes were evaluated at a field Fe0-PRB at the Oak Ridge Y-12 site concerning operation performance during the treatment of U in high NO3- groundwater. In the 5-year study period, the Fe0 remained reactive as shown in pore-water monitoring data, where increases in pH and the removal of certain ionic species persisted. However, coring revealed varying degrees of cementation. After 3.8-year treatment, porosity reduction of up to 41.7% was obtained from mineralogical analysis on core samples collected at the upgradient gravel-Fe0 interface. Elsewhere, Fe0 filings were loose with some cementation. Fe0 corrosion and pore volume reduction at this site are more severe due to the presence of NO3- at a high level. Tracer tests indicate that hydraulic performance deteriorated: the flow distribution was heterogeneous and under the influence of interfacial cementation a large portion of water was diverted around the Fe0 and transported outside the PRB. Based on the equilibrium reductions of NO3- and SO4(2-) by Fe0 and mineral precipitation, geochemical modeling predicted a maximum of 49% porosity loss for 5 years of operation. Additionally, modeling showed a spatial distribution of mineral precipitate volumes, with the maximum advancing from the interface toward downgradient with time. This study suggests that water quality monitoring, coupled with hydraulic monitoring and geochemical modeling, can provide a low-cost method for assessing PRB performance.     

Influence of hydrogeochemical processes on zero-valent iron reactive barrier performance: a field investigation

Geochemical and mineralogical changes were evaluated at a field Fe0-PRB at the Oak Ridge Y-12 site concerning operation performance during the treatment of U in high NO3- groundwater. In the 5-yr study period, the Fe0 remained reactive as shown in pore water monitoring data, where increases in pH and the removal of certain ionic species persisted. However, coring revealed varying degrees of cementation. After 3.8-yr treatment, porosity reduction of up to 41.7% was obtained from mineralogical analysis on core samples collected at the upgradient gravel-Fe0 interface. Elsewhere, Fe0 filings were loose with some cementation. Fe0 corrosion and pore volume reduction at this site are more severe due to the presence of NO3- at a high level. Tracer tests indicate that hydraulic performance deteriorated: the flow distribution was heterogeneous and under the influence of interfacial cementation a large portion of water was diverted around the Fe0 and transported outside the PRB. Based on the equilibrium reductions of NO3- and SO4(2-) by Fe0 and mineral precipitation, geochemical modeling predicted a maximum of 49% porosity loss for 5 yr of operation. Additionally, modeling showed a spatial distribution of mineral precipitate volumes, with the maximum advancing from the interface toward downgradient with time. This study suggests that water quality monitoring, coupled with hydraulic monitoring and geochemical modeling, can provide a low-cost method for assessing PRB performance.     

城市生活污水厌氧生物处理发展现状

回顾了国内外污水厌氧生物处理工艺的发展情况,着重分析了中国城市污水的特点以及厌氧生物处理工艺在城市生活污水处理中的应用情况。     

高浓度焦化废水湿式氧化铜系催化剂的研制

通过共沉淀法制备了铜系催化剂 ,用于催化湿式氧化处理高浓度焦化废水。结果表明 ,铜氧化物催化剂的催化活性明显优于其他过渡金属氧化物 ;优化催化剂的设计和制备方法 ,可有效地改善Cu2 +的溶出问题 ,使该类催化剂具有广阔的应用前景     

城市生活污水处理后回用作热电厂循环冷却水的可行性研究

选用适合热电厂特点的水处理剂,利用静态试验,动态模拟试验手段,对城市生活污水回用于热电厂循环冷却水系统中的复配药剂的阻垢缓蚀性能进行了研究.通过试验表明,污水回用是可行的,为城市生活污水回用于热电厂循环冷却水系统工程提供了可靠的参数.     

城市生活污水处理后回用作热电厂循环冷却水的可行性研究

选用适合热电厂特点的水处理剂，利用静态试验。动态模拟试验手段，对城市生活污水回用于热电厂循环冷却水系统中的复配药剂的阻垢缓蚀性能进行了研究。通过试验表明。污水回用是可行的，为城市生活污水回用于热电厂循环冷却水系统工程提供了可靠的参数。     

天津市医疗废物处置规划及策略研究

以天津市医疗废物管理现状为研究对象，对处置方式进行深入探讨，分析目前分散处置和集中处置存在的缺陷，提出“区域集中处置”设想；并运用模糊决策模型理论，建立较完善的处置方式评价指标体系，应用模糊综合评价模型得出“区域集中处置”是最佳的医疗废物处置方式，同时提出了相应的区域集中处置策略。