高浓度焦化废水湿式氧化铜系催化剂的研制

通过共沉淀法制备了铜系催化剂 ,用于催化湿式氧化处理高浓度焦化废水。结果表明 ,铜氧化物催化剂的催化活性明显优于其他过渡金属氧化物 ;优化催化剂的设计和制备方法 ,可有效地改善Cu2 +的溶出问题 ,使该类催化剂具有广阔的应用前景     

MnO2负载树脂的制备及对As（V）的去除效果

制备了大孔和DH302 2种MnO2的负载树脂。并用SEM、EDS手段表征了负载树脂，实验了负载MnO2后树脂对As（V）的去除效果。结果表明：负载树脂对As（V）的去除效果比原树脂有很大提高；吸附As（V）后的2种负载树脂，均能较好地解吸并可重新用于对As（V）的吸附实验。     

The effect of diesel fuel sulfur content on particulate matter emissions for a nonroad diesel generator

The effect of sulfur content on diesel particulate matter (DPM) emissions was studied using a diesel generator (Generac Model SD080, rated at 80 kW) as the emission source to simulate nonroad diesel emissions. A load simulator was used to apply loads to the generator at 0, 25, 50, and 75 kW, respectively. Three diesel fuels containing 500, 2100, and 3700 ppm sulfur by weight were selected as generator fuels. The U.S. Environmental Protection Agency sampling Method 5 "Determination of Particulate Matter Emissions from Stationary Sources" together with Method 1A "Sample and Velocity Traverses for Stationary Sources with Small Stacks or Ducts" was adopted as a reference method for measurement of the exhaust gas flow rate and DPM mass concentration. The effects of various parameters on DPM concentration have been studied, such as fuel sulfur contents, engine loads, and fuel usage rates. The increase of average DPM concentrations from 3.9 mg/Nm3 (n cubic meter) at 0 kW to 36.8 mg/Nm3 at 75 kW is strongly correlated with the increase of applied loads and sulfur content in the diesel fuel, whereas the fuel consumption rates are only a function of applied loads. An empirical correlation for estimating DPM concentration is obtained when fuel sulfur content and engine loads are known for these types of generators: Y = Zm(alphaX + beta), where Y is the DPM concentration, mg/m3, Z is the fuel sulfur content, ppm(w) (limited to 500-3700 ppm(w)), X is the applied load, kW, m is the constant, 0.407, alpha and beta are the numerical coefficients, 0.0118 +/- 0.0028 (95% confidence interval) and 0.4535 +/- 0.1288 (95% confidence interval), respectively.     

Investigation on the influence of methanol on adsorption and leaching of pesticides with soil column liquid chromatography

The effect of methanol of low concentration on adsorption and leaching of atrazine and tebuconazole was studied in this paper. The adsorption coefficients and the retardation factors (R^m) of pesticides on EUROSOIL 3# log-linearly decreased as volumetric fraction of methanol (f^c) was increased in the binary solvent mixtures of methanol and water. These data are consistent with solvophobic theory formerly outlined for describing the adsorption and transport of hydrophobic organic chemicals from mixed solvents. Nevertheless, the adsorption of these pesticides in soil–water system slightly increased when the soil was pre-washed with methanol in comparison with that pre-washed with water (pure water system). Furthermore, their adsorption coefficients were still higher in binary solvent systems with methanol of very low concentrations, i.e. f^c<0.03 for atrazine and f^c<0.01 for tebuconazole, than those in pure water system. The adsorption coefficients (logK^w) of atrazine and tebuconazole predicted by solvophobic theory were 0.5792 and 1.6525, respectively, and their experimental logK^w were 0.3701 and 1.6275 in pure water system. Obviously, the predicted logK^w of the two pesticides was higher than the experimental log K^w in pure water system. The predicted K^w and the retardation factor (R^w) in pure water system by solvophobic theory are thus possibly inaccurate.     

利用分子信标和EXO III放大荧光信号快速检测Ag+

设计新型的DNA探针,其主要功能区域包含适配体区域和分子信标互补区域;当无靶标存在时,羧基荧光素（FAM）的荧光被黑洞猝灭基团（BHQ）猝灭,加入靶标后,Ag⁺与适配体区域特异性结合,使得分子信标与其互补区域发生结合,加入EXO Ⅲ后,分子信标被酶解,从而释放Ag⁺/DNA探针复合物用于下一轮反应,同时产生大量的FAM,因此,可以通过荧光的增强来定量检测靶标的含量.评价了该方法的灵敏度和选择性,探究它在实际样品中的表现能力.结果表明,适配体区域与分子信标间隔2个碱基的DNA探针与分子信标结合效果最好,检测的信噪比最大.该方法对Ag⁺的检测最低下限（LOD）为0.1nmol/L,在0.5~200nmol/L范围内,荧光值与靶标浓度成线性关系（R²=0.994）.对实际样品的检测在20~200nmol/L范围内呈线性关系（R²=0.998）,且能很好的从混合样品中区分10nmol/L Ag⁺.该研究建立的快速检测Ag⁺方法具有良好的线性定量能力和操作性能,且灵敏度高、特异性强,可满足现实的需求.     

高效除磷渗滤床填料筛选及连续流动态运行特性

磷是造成水体富营养化的重要因素之一,深度去除污染水体中的磷,具有重要的环保意义.为此,本研究比较了多种填料包括海绵铁及其改性填料、钢渣、活性氧化铝、活性炭的吸附除磷特性及动力学,探究了除磷机理,构建了高效除磷渗滤床,考察了动态连续流运行条件下的除磷特性.结果表明酸改性海绵铁具有最高的饱和磷吸附容量,为19.45 mg·g^-1,碱改性海绵铁、活性氧化铝、钢渣、未改性海绵铁及活性炭的饱和磷吸附容量分别为10.91、8.70、7.73、3.39和1.34 mg·g^-1.在此基础上,利用高效除磷填料酸改性海绵铁和钢渣构建了除磷渗滤床,开展了连续240 d的连续流实验,在磷容积负荷为6 g·d^-1·m^-3条件下,渗滤床累积磷吸附量达到10215 mg,单位容积吸附量达到1.62 kg·m^-3.总之,利用酸改性海绵铁和钢渣构建的除磷渗滤床具有较高的除磷效率和性能,可以作为除磷单元与现有的水污染治理及净化工艺耦合,提高或拓展系统除磷功能.     

UV-B辐射增强对芦苇生长及生理特性的影响

在UV-B辐射增强条件下,以芦苇为材料,研究了不同辐射梯度对芦苇生长及生理特性的影响.结果表明:与自然光照相比,UV-B辐射增强可显著降低芦苇植株高度、比叶面积、生物量,且高强度辐射处理的影响大于低强度辐射,随辐射时间延长,生物量分配有向地下部分转移的趋势;与自然光照相比,UV-B辐射增强可显著增加芦苇叶片丙二醛(MDA)含量、抗氧化酶活性(SOD、CAT、GR、APX)、抗氧化物质含量(GSH、As A),且随辐射强度增大,MDA含量、酶活性、抗氧化物质含量增强程度加剧,但随辐射时间延长,高辐射处理下,GR酶活显著低于对照,GSH也表现出相应的趋势;UV-B辐射增强条件下,类胡萝卜素含量显著降低,而类黄酮含量较对照组却显著升高,且高强度辐射处理对芦苇叶片紫外吸收物质的影响大于低强度辐射.     

基于HLA的大气环境仿真应用研究

针对大气环境仿真的特点,采用HLA分布式仿真技术,论述了以HLA/RTI为支撑的大气环境分布式仿真体系结构、关键技术及实现方案,并对该环境下开发大气环境联邦成员进行了详细的说明,实现了大气环境建模与仿真应用的一体化设计,从而提高了大气环境仿真应用的互操作性和可重用性,为大气环境仿真向其它系统仿真应用提供了一种有效的手段。     

典型环境条件下装备环境适应性的评估方法

系统分析了航空装备环境适应的特点及环境适应性要求的类型。在此基础上,根据装备的相关环境试验信息和外场环境故障信息,遵循确定模糊集隶属函数的原则,分别构建了描述装备对单因素环境适应性的隶属度。基于单因素评估结果,选择合适的确定权重的方法,确定模糊综合评判中各层次因素的权重。最后选择合适的合成算子采用模糊综合评估的方法分别提出了装备与下层产品的综合环境适应性评估方法。通过实例验证了模型的合理性和方法的可行性。