Genotoxic assessment on river water using different biological systems

This paper reports genotoxicity and toxicity data in water samples collected in Sinos River, an important water course in the hydrographic region of Guaíba Lake, Rio Grande do Sul State, south of Brazil. This river is exposed to intense anthropic influence by numerous shoes, leather, petrochemical, and metallurgy industries. Water samples were collected at two moments (winter 2006 and spring 2006) at five sites of Sinos River and evaluated using in vitro V79 Chinese hamster lung fibroblasts (cytotoxicity, comet assay and micronucleus test) and Allium cepa test (toxicity and micronucleus test). Comet and micronucleus tests revealed that water samples collected exerted cytotoxic, toxic, genotoxic and mutagenic effects. The results showed the toxic action of organic and inorganic agents found in the water samples in all sites of Sinos River, for both data collections. The main causes behind pollution were the domestic and industrial toxic discharges. The V79 and A. cepa tests were proved efficient to detect toxicity and genotoxicity caused by complex mixtures. This study also showed the need for constant monitoring in sites with strong environmental degradation caused by industrial discharges and urban sewages.     

Dissolution and sorption of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and 2,4,6-trinitrotoluene (TNT) residues from detonated mineral surfaces

Composition B (Comp B) is a commonly used military formulation composed of the toxic explosive compounds 2,4,6-trinitrotoluene (TNT), and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Numerous studies of the temporal fate of explosive compounds in soils, surface water and laboratory batch reactors have been conducted. However, most of these investigations relied on the application of explosive compounds to the media via aqueous addition and thus these studies do not provide information on the real world loading of explosive residues during detonation events. To address this we investigated the dissolution and sorption of TNT and RDX from Comp B residues loaded to pure mineral phases through controlled detonation. Mineral phases included nontronite, vermiculite, biotite and Ottawa sand (quartz with minor calcite). High Performance Liquid Chromatography and Attenuated Total Reflectance Fourier Transform Infrared spectroscopy were used to investigate the dissolution and sorption of TNT and RDX residues loaded onto the mineral surfaces. Detonation resulted in heterogeneous loading of TNT and RDX onto the mineral surfaces. Explosive compound residues dissolved rapidly (within 9 h) in all samples but maximum concentrations for TNT and RDX were not consistent over time due to precipitation from solution, sorption onto mineral surfaces, and/or chemical reactions between explosive compounds and mineral surfaces. We provide a conceptual model of the physical and chemical processes governing the fate of explosive compound residues in soil minerals controlled by sorption-desorption processes.     

The effect of continuous exposure of copper on the properties and extracellular polymeric substances (EPS) of bulking activated sludge

Introduction  

This study investigated the effect of copper on chemical oxygen demand (COD) removal efficiency and on the properties (mainly settling and dewatering) and the composition of extracellular polymeric substances (EPS) when 20 mg/L Cu(II) was continuously dosed to a sequencing batch reactor (SBR) inoculated with activated sludge.     

Determination of pharmaceuticals, personal care products, and pesticides in surface and treated waters: method development and survey

Water is fundamental to the existence of life since it is essential to a series of activities, such as agriculture, power generation, and public and industrial supplies. The residual water generated by these activities is released into the environment, reaches the water systems, and becomes a potential risk to nontarget organisms. This paper reports the development and validation of a quantitative method, based on solid-phase extraction and liquid chromatography tandem mass spectrometry, for the simultaneous analysis of 18 pharmaceuticals and personal care products (PPCPs) and 33 pesticides in surface and drinking waters. The accuracy of the method was determined by calculating the recoveries, which ranged from 70 to 120 % for most pesticides and PPCPs, whereas limits of quantification ranged from 0.8 to 40 ng/L. After the validation step, the method was applied to drinking and surface waters. Pesticides and PPCPs were found in concentrations lower than 135.5 ng/L. The evaluation of different water sources with regard to contamination by pesticides and PPCPs has been quite poor in southern Brazil.     

State of the Art Report on Mathematical Methods for Groundwater Pollution Source Identification

The reliable assessment of hazards or risks arising from groundwater contamination problems and the design of efficient and effective techniques to mitigate these problems require the capability to predict the behavior of chemical contaminants in flowing water. Most attempts at quantifying contaminant transport have relied on a solution of some form of a well-known governing equation referred to as advection-dispersion-reaction equation. To choose an appropriate remediation strategy, knowledge of the contaminant release source and time release history becomes pertinent. As additional contaminated sites are being detected, it is almost impossible to perform exhaustive drilling, testing, and chemical fingerprint analysis every time. Moreover, chemical fingerprinting and site records are not sufficient to allow a unique solution for the timing of source releases. The purpose of this paper is to present and review mathematical methods that have been developed during the past 15 years to identify the contaminant source location and recover the time release history.     

Median lethal concentration of formaldehyde and its genotoxic potential in bullfrog tadpoles (Lithobates catesbeianus)

In order to avoid that contaminated frog farms animals escaping in the environment and become potential vector of emergent diseases, studies with disinfection protocol are strictly necessary. The formaldehyde is one of the compounds tested in fungal disinfection protocols and also used in aquaculture. This study aimed to determine the median lethal concentration (LC_50–96h) of formaldehyde in bullfrog tadpoles and to evaluate the possible genotoxic effects in acute exposition. Accordingly, the animals were exposed to formaldehyde in the concentrations of 6, 9, 12, 15, and 18 mg L^?1, and after 96 h blood samples were drawn for the micronucleus (MN) test. The LC_50–96h was 10.53 mg L^?1, and the MN frequency increased in proportion to the formaldehyde concentrations, with an estimated frequency in the negative control being 1.35 MN/individual. We concluded that formaldehyde is genotoxic to tadpoles of bullfrogs in the tested concentrations, and the choice of this chemical should be contemplated before its use in animals in captivity.     

Detection of hormones in surface and drinking water in Brazil by LC-ESI-MS/MS and ecotoxicological assessment with <Emphasis Type="Italic">Daphnia magna</Emphasis>

The growing use of pharmaceutical drug is mainly due to several diseases in human and in animal husbandry. As these drugs are discharged into waterways via wastewater, they cause a major impact on the environment. Many of these drugs are hormones; in which even at low concentrations can alter metabolic and physiological functions in many organisms. Hormones were found in surface water, groundwater, soil, and sediment at concentrations from nanograms to milligrams per liter of volume—quantities known to cause changes in the endocrine system of aquatic organisms. This study aimed to develop a methodology for hormone detection (estriol, estrone, 17β-estradiol, 17α-ethinylestradiol, progesterone, and testosterone) on surface and treated water samples. Sample toxicity was assessed by ecotoxicology tests using Daphnia magna. A liquid chromatograph coupled to a mass spectrometer with an electrospray ionization source (LC-ESI-MS/MS) was used for the analysis. The results showed that samples were contaminated by the hormones estriol, estrone, progesterone, 17β-estradiol, and 17α-ethinylestradiol during the sampling period, and the highest concentrations measured were 90, 28, 26, 137, and 194 ng·L^?1, respectively. This indicates the inflow of sewage containing these hormones at some points in the Piracicaba River in the State of Sao Paulo—Brazil. Results indicated little toxicity of the hormone estriol in D. magna, indicating that chronic studies with this microcrustacean are necessary.     

Dissecting the ecosystem service of large-scale pollutant retention: The role of wetlands and other landscape features

Various features of a landscape contribute to the regulating ecosystem service of reducing waterborne pollutant loading to downstream environments. At local scales, wetlands have been shown to be effective in retaining pollutants. Here, we investigate the landscape-scale contribution to pollutant retention provided by multiple wetlands. We develop a general analytical model which shows that the retention contribution of wetlands and other landscape features is only significant if a large fraction of the total waterborne pollutant transport passes through them. Next, by means of a statistical analysis of official data, we quantify the nutrient retention contribution of wetlands for multiple sub-catchments in two Swedish Water Management Districts. We compare this with the retention contribution of two other landscape features: the waterborne transport distance and major lakes. The landscape-scale retention contribution of wetlands is undetectable; rather, the other two landscape features account for much of the total nutrient retention.     

The use of a natural coagulant (Opuntia ficus-indica) in the removal for organic materials of textile effluents

The goal of this study was to investigate the activity of the coagulant extracted from the cactus Opuntia ficus-indica (OFI) in the process of coagulation/flocculation of textile effluents. Preliminary tests of a kaolinite suspension achieved maximum turbidity removal of 95 % using an NaCl extraction solution. Optimization assays were conducted with actual effluents using the response surface methodology (RSM) based on the Box–Behnken experimental design. The responses of the variables FeCl₃, dosage, cactus dosage, and pH in the removal of COD and turbidity from both effluents were investigated. The optimum conditions determined for jeans washing laundry effluent were the following: FeCl₃ 160 mg L^?1, cactus dosage 2.60 mg L^?1, and pH 5.0. For the fabric dyeing effluent, the optimum conditions were the following: FeCl₃ 640 mg L^?1, cactus dosage 160 mg L^?1, and pH 6.0. Investigation of the effects of the storage time and temperature of the cactus O. ficus-indica showed that coagulation efficiency was not significantly affected for storage at room temperature for up to 4 days.     

Enhancement of PAH biomineralization rates by cyclodextrins under Fe(III)-reducing conditions

Amendment of a soil slurry with low concentrations of a cyclodextrin, hydroxypropyl-beta-cyclodextrin (HPCD), (0.05-0.5 g l(-1)) increased the phenanthrene mineralization rate of a microbial consortium by 25% under Fe(III)-reducing conditions. Although a higher concentration (5.0 g l(-1)) resulted in a faster initial rate of mineralization, mineralization ceased after 25 days with maximum mineralization 17% lower than the control (no HPCD). At lower HPCD concentrations, mineralization was still taking place at day 76. Although pH should affect Fe(III) solubility, mineralization rates at pH 6.0 and 8.0 were comparable. Decreasing the temperature reduced the extent and rate of mineralization, but mineralization rates at 10 degrees C were still 60% of that obtained at 30 degrees C.