Investigation of Child Restraint System (CRS) Compatibility in the Vehicle Seat Environment

Objective: Child restraint system (CRS) misuse is common and can have serious consequences to child safety. Physical incompatibilities between CRS and vehicles can complicate the installation process and may worsen CRS misuse rates. This study aims to identify the most common sources of incompatibility between representative groups of CRS and vehicles.

Methods: Detailed dimensional data were collected from 59 currently marketed CRS and 61 late model vehicles. Key dimensions were compared across all 3,599 theoretical CRS/vehicle combinations and the most common predicted incompatibilities were determined. A subset of 34 physical installations was analyzed to validate the results.

Results: Only 58.2% of rear-facing (RF) CRS/vehicle combinations were predicted to have proper agreement between the vehicle's seat pan angle and the CRS manufacturers’ required base angle. The width of the base of the CRS was predicted to fit snugly between the vehicle's seat pan bolsters in 63.3% of RF CRS/vehicle combinations and 62.2% of forward-facing (FF) CRS/vehicle combinations. FF CRS were predicted to be free of interaction with the vehicle's head restraint in 66.4% of combinations. Roughly 90.0% of RF CRS/vehicle combinations were predicted to have enough horizontal clearance space to set the front seat in the middle its fore/aft slider track. Compatibility rates were above 98% regarding the length of the CRS base compared to the length of the vehicle seat pan and the ability of the top tether to reach the tether anchor. Validation studies revealed that the predictions of RF CRS base angle range vs. seat pan angle compatibility were accurate within 6%, and head restraint interference and front row clearance incompatibilities may be more common than the dimensional analysis approach has predicted.

Conclusions: The results of this study indicate that RF CRS base angles and front row clearance space, as well as FF CRS head restraint interference, are frequent compatibility concerns. These results enable manufacturers, researchers, and consumers to focus their attention on the most relevant CRS/vehicle incompatibility issues in today's market.     

An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution

Computer display technology is currently in a state of transition, as the traditional technology of cathode ray tubes is being replaced by liquid crystal display flat-panel technology. Technology substitution and process innovation require the evaluation of the trade-offs among environmental impact, cost, and engineering performance attributes. General impact assessment methodologies, decision analysis and management tools, and optimization methods commonly used in engineering cannot efficiently address the issues needed for such evaluation. The conventional Life Cycle Assessment (LCA) process often generates results that can be subject to multiple interpretations, although the advantages of the LCA concept and framework obtain wide recognition. In the present work, the LCA concept is integrated with Quality Function Deployment (QFD), a popular industrial quality management tool, which is used as the framework for the development of our integrated model. The problem of weighting is addressed by using pairwise comparison of stakeholder preferences. Thus, this paper presents a new integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), to assess the environmental behavior of alternative technologies in correlation with their performance and economic characteristics. Computer display technology is used as the case study to further develop our methodology through the modification and integration of various quality management tools (e.g., process mapping, prioritization matrix) and statistical methods (e.g., multi-attribute analysis, cluster analysis). Life cycle thinking provides the foundation for our methodology, as we utilize a published LCA report, which stopped at the characterization step, as our starting point. Further, we evaluate the validity and feasibility of our methodology by considering uncertainty and conducting sensitivity analysis.     

Adhesion of Norovirus to Surfaces: Contribution of Thermodynamic and Molecular Properties Using Virus-Like Particles

Food and Environmental Virology - The aim of the study was to assess human norovirus and feline calicivirus (FCV) surface free energy, hydrophobicity, and ability to interact with fresh foods and...     

A 13-Week Comparison of Passive and Continuous Ozone Monitors at Forested Sites in North-Central Pennsylvania

ABSTRACT

Ogawa passive O₃ samplers were used in a 13-week study (June 1-September 1, 1999) involving 11 forested and mountaintop sites in north-central Pennsylvania. Four of the sites were collocated with TECO model 49 O₃ analyzers. A significant correlation (p < 0.0001) was found for 24-hr average weekly O₃ concentrations between the two methodologies at the four sites with collocated monitors. As expected, there were positive relationships between increasing elevation of the sites and increasing O₃ concentrations. No O₃ exposure patterns were found on a west-to-east or south-to-north basis; however, the area known for lower O₃ exposures within a smaller subsection of the study area showed consistently lower O₃ exposures. Preliminary results regarding relationships of symptom responses within O₃-sensitive bioindicators are also presented with black cherry (Prunus serotina, Elirli.) and common milkweed (Asclepias syriaca, L.) showing clear evidence of increasing injury with increasing O₃ exposures. Due to the extremely dry conditions encountered in north-central Pennsylvania during the 1999 growing season, O₃-induced symptoms were sporadic and quite delayed until late-season rains during the latter portion of the observation period.     

Isotope applications in environmental investigations part II: Groundwater age dating and recharge processes,and provenance of sulfur and methane

Measurement of the isotopic composition of solids, solutes, gases, and water complement standard hydrogeological investigation techniques by providing information that may not otherwise be obtainable. Groundwater age estimates determined from the decay of radio‐isotopes or from groundwater concentrations of anthropogenic gases such as chlorofluorocarbons (CFCs) and sulfur hexafluoride (SF₆) are used to verify flow regimes and constrain or calibrate hydrologic flow models. Groundwater recharge rates are estimated by measuring the concentrations or activities of a variety of isotopes including ²H, ³H, ¹⁸O, and ³⁶Cl. Excess sulfur causes salinization of water supplies and acidification of precipitation, surface water, and groundwater. The wide range of sulfur isotopic compositions exhibited by different sulfur species and sources allows the application of sulfur isotopes to trace sources and fate of sulfur in the environment. Methane is a ubiquitous gas that has economic value when located in extractable reservoirs. Methane is also a greenhouse gas and is a potential explosion and health hazard when it accumulates in buildings and water distribution systems. The carbon and hydrogen isotopic composition of methane can be used to determine the provenance of methane, distinguishing between thermogenic and biogenic sources. The addition of isotopic analyses to environmental investigations can be a cost‐effective means of resolving intractable issues. © 2003 Wiley Periodicals, Inc.     

Neanderthal medics? Evidence for food, cooking, and medicinal plants entrapped in dental calculus

Neanderthals disappeared sometime between 30,000 and 24,000?years ago. Until recently, Neanderthals were understood to have been predominantly meat-eaters; however, a growing body of evidence suggests their diet also included plants. We present the results of a study, in which sequential thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) and pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) were combined with morphological analysis of plant microfossils, to identify material entrapped in dental calculus from five Neanderthal individuals from the north Spanish site of El Sidrón. Our results provide the first molecular evidence for inhalation of wood-fire smoke and bitumen or oil shale and ingestion of a range of cooked plant foods. We also offer the first evidence for the use of medicinal plants by a Neanderthal individual. The varied use of plants that we have identified suggests that the Neanderthal occupants of El Sidrón had a sophisticated knowledge of their natural surroundings which included the ability to select and use certain plants.