Electronic waste recycling: A review of U.S. infrastructure and technology options

The useful life of consumer electronic devices is relatively short, and decreasing as a result of rapid changes in equipment features and capabilities. This creates a large waste stream of obsolete electronic equipment, electronic waste (e-waste).Even though there are conventional disposal methods for e-waste, these methods have disadvantages from both the economic and environmental viewpoints. As a result, new e-waste management options need to be considered, for example, recycling. But electronic recycling has a short history, so there is not yet a solid infrastructure in place.In this paper, the first half describes trends in the amount of e-waste, existing recycling programs, and collection methods. The second half describes various methods available to recover materials from e-waste. In particular, various recycling technologies for the glass, plastics, and metals found in e-waste are discussed. For glass, glass-to-glass recycling and glass-to-lead recycling technologies are presented. For plastics, chemical (feedstock) recycling, mechanical recycling, and thermal recycling methods are analyzed. Recovery processes for copper, lead, and precious metals such as silver, gold, platinum, and palladium are reviewed. These processes are described and compared on the basis of available technologies, resources, and material input–output systems.     

Organic Nitrogen in Precipitation Across the United Kingdom

The concentration of water-soluble organic nitrogen (WSON) in precipitation has been measured at seven sites across the United Kingdom, over a period of 1–2 years, using protocols developed in a pilot study. Samples were collected over 1–2 weeks in continuously open funnels made of stainless steel, draining to a glass bottle, and were preserved during and after collection by the addition of thymol. After chemical analysis, samples were excluded from the long-term average if they showed signs of contamination (significant concentrations of K⁺ or PO₄ ^3–). Two methods of measuring total dissolved N were used, persulphate oxidation and high-temperature chemiluminescence. The latter generally gave the larger values, and has been used to asses the organic component of dissolved N. The long-term data set confirms the original results from the pilot study - organic N contributes between 24 and 40% to the total annual wet deposition of dissolved N across the United Kingdom. The fraction of WSON was greatest at western sites, and was strongly correlated with ammonium concentrations. However, the seasonal pattern across all sites showed a late spring maximum for ammonium and nitrate, but a late summer maximum for WSON. The magnitude of the contribution of WSON to wet-deposited N has implications for the setting and assessment of critical loads for N deposition.     

Remediation of Persistent Organic Pollutants Using a Novel Two-Phase Soil Washing Biosorption Process

A two-phase soil washing biosorption process was developed for the remediation of p,p-DDT-contaminated soil. The process involved desorption of contaminants from soil using dilute primary alcohols (40% 1-propanol) followed by contaminant removal from cosolvent solutions using fungal biosorption. Bench scale remediation studies were preformed to simulate ex situ (recycling experiment) or in situ (soil column study) treatment strategies. Both systems were effective at cleaning the soil to below Australian regulatory p,p-DDT levels. After 50–80 hours of soil washing, over 93% of p,p-DDT was removed from the soil(990 mg kg^-1 to <65 mg kg^-1) using either of these methods.p,p-DDT was removed from the cosolvent phase by sorption onto the fungal biomass. This resulted in only low levels of p,p-DDT remaining in the cosolvent solution(<1.5 mg l^-1). The application of both treatment strategies resulted in the rapid clean up of p,p-DDT-contaminated soil and the potential to recycle cosolvent solutions. The ability to recycle cosolvent solutions provides a mechanism for cost reductions of the remediation strategy.     

Environmental auditing: Theory and applications

The environmental audit has become a regular part of corporate environmental management in Canada and is also gaining recognition in the public sector. A 1991 survey of 75 private sector companies across Canada revealed that 76% (57/75) had established environmental auditing programs. A similar survey of 19 federal, provincial, and municipal government departments revealed that 11% (2/19) had established such programs. The information gained from environmental audits can be used to facilitate and enhance environmental management from the single facility level to the national and international levels. This paper is divided into two sections: section one examines environmental audits at the facility/company level and discusses environmental audit characteristics, trends, and driving forces not commonly found in the available literature. Important conclusions are: that wherever possible, an action plan to correct the identified problems should be an integral part of an audit, and therefore there should be a close working relationship between auditors, managers, and employees, and that the first audits will generally be more difficult, time consuming, and expensive than subsequent audits. Section two looks at environmental audits in the broader context and discusses the relationship between environmental audits and three other environmental information gathering/analysis tools: environmental impact assessments, state of the environment reports, and new systems of national accounts. The argument is made that the information collected by environmental audits and environmental impact assessments at the facility/company level can be used as the bases for regional and national state of the environment reports and new systems of national accounts.     

Management strategy for acidic deposition in Western and Northern Canada

The governments of British Columbia, Alberta, Saskatchewan, Manitoba, Northwest Territories, and Canada held joint consultations in 1980 to review the available information on acid rain from Western and Northern Canada. It was concluded that acid rain might become a problem in the future and, hence, a research, monitoring, and management strategy for acidic deposition was needed. An overview of the joint governments' management strategy, organization of research and monitoring programs, and accomplishments to date are discussed in this article.The authors are members of the Technical Committee for the Long Range Transport of Atmospheric Pollutants (LRTAP)/Acid Deposition in Western and Northern Canada, and represent Alberta and British Columbia, respectively.     

Taxing mineral resource projects : Papua New Guinea, Indonesia and the Philippines

Within the context of a case study of three Asia/Pacific countries' mineral taxation regimes, this article examines the impact of individual fiscal instrucments, and the total fiscal package, on investor risk perceptions, investor returns and government receipts. It shows that under conditions of uncertainty and risk aversion on the part of investors, significant gains in expected government revenues can be achieved without seriously affecting the investors' ex-ante assessments of projects by a judicious selection and mix of fiscal instruments.     

Soil Gas Volatile Organic Compound Concentration Contours for Locating Vadose Zone Nonaqueous Phase Liquid Contamination

Diffusion of VOC from cylindrical vadose zone domains contaminatedwith distributed nonaqueous phase liquid is examined in the steadystate approximation. The effects of first-order biodegradation and ofan extended underlying pool of LNAPL floating on the water table belowthe cylindrical domain are explored by means of an orthogonal functionsapproach. The distribution of VOC in the vadose zone above a floatingcircular LNAPL pool of finite size is explored by a numerical method.The results provide information useful in estimating the spacing anddepth at which soil gas samples should be taken in order to detect thepresence of such source areas. Comparison of model results with soilgas VOC measurements at various depths also provides insight into theextent to which natural biodegradation of the VOCs is taking place.     

Adsorption of antimony(V) by floodplain soils, amorphous iron(III) hydroxide and humic acid

Antimony (Sb) emissions to the environment are increasing, and there is a dearth of knowledge regarding Sb fate and behaviour in natural systems. In particular, there is a lack of understanding of sorption of the oxidised Sb(V) species onto soils and soil phases. In this study sorption of Sb(V) by two organic rich soils with high levels of oxalate extractable Fe was examined over the pH range of 2.5-7. Furthermore, the sorption behaviour of Sb(V) was examined in two phases mimicking those dominant in the experimental soils, namely a solid humic acid and an amorphous Fe(OH)3, across the same pH range. Sorption of Sb by the soils and the humic acid fitted a Freundlich type isotherm, with the equation parameters reflecting changes in bonding affinity corresponding to pH changes. The soils sorbed >75% of the added Sb in all trials, and 80-100% at pH values less than approximately 6.5. The Fe(OH)3 retained >95% of the added Sb in all experiments. The humic acid sorbed up to 60% of the added Sb at acidic pH values, but sorption decreased to zero at higher pH values. Further adsorption studies are recommended, such as examining the effects of ion competition and changes in ionic strength.     

Migration of pollutants in groundwater. IV. Modeling of the pumping of contaminants from fractured bedrock

The removal of soluble contaminants from fractured porous bedrock by means of a recovery well is modeled by means of a lumped parameter approach. The diffusion of contaminant from immobile liquid within the pores of the fractured rock into the mobile liquid in the interstices is handled by means of a time constant the estimation of which is described.