Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

Metabolomic modulations in a freshwater microbial community exposed to the fungicide azoxystrobin

An effective broad-spectrum fungicide, azoxystrobin (AZ), has been widely detected in aquatic ecosystems, potentially affecting the growth of aquatic microorganisms. In the present study, the eukaryotic alga Monoraphidium sp. and the cyanobacterium Pseudanabaena sp. were exposed to AZ for 7 days. Our results showed that 0.2–0.5 mg/L concentrations of AZ slightly inhibited the growth of Monoraphidium sp. but stimulated Pseudanabaena sp. growth. Meanwhile, AZ treatment effectively increased the secretion of total organic carbon (TOC) in the culture media of the two species, and this phenomenon was also found in a freshwater microcosm experiment (containing the natural microbial community). We attempted to assess the effect of AZ on the function of aquatic microbial communities through metabolomic analysis and further explore the potential risks of this compound. The metabonomic profiles of the microcosm indicated that the most varied metabolites after AZ treatment were related to the citrate cycle (TCA), fatty acid biosynthesis and purine metabolism. We thereby inferred that the microbial community increased extracellular secretions by adjusting metabolic pathways, which might be a stress response to reduce AZ toxicity. Our results provide an important theoretical basis for further study of fungicide stress responses in aquatic microcosm microbial communities, as well as a good start for further explorations of AZ detoxification mechanisms, which will be valuable for the evaluation of AZ environmental risk.     

Analytical methods and environmental processes of nanoplastics

The degradation of plastic debris may result in the generation of nanoplastics (NPs). Their high specific surface area for the sorption of organic pollutions and toxic heavy metals and possible transfer between organisms at different nutrient levels make the study of NPs an urgent priority. However, there is very limited understanding on the occurrence, distribution, abundant, and fate of NPs in the environment, partially due to the lack of suitable techniques for the separation and identification of NPs from complex environmental matrices. In this review, we first overviewed the state-of-the-art methods for the extraction, separation, identification and quantification of NPs in the environment. Some of them have been successfully applied for the field determination of NPs, while some are borrowed from the detection of microplastics or engineered nanomaterials. Then the possible fate and transport of NPs in the environment are thoroughly described. Although great efforts have been made during the recent years, large knowledge gaps still exist, such as the relatively high detection limit of existing method failing to detect ultralow masses of NPs in the environment, and spherical polystyrene NP models failing to represent the various compositions of NPs with different irregular shapes, which needs further investigation.     

中温期和高温期污泥堆肥物料中典型氟喹诺酮类抗生素去除的影响因素

污泥处理后土地利用是氟喹诺酮类抗生素（fluoroquinolones,FQs）进入土壤环境的主要途径之一。好氧堆肥具有高效去除FQs、削减其环境风险的潜力,但目前对于堆肥过程中各阶段物料FQs去除影响因素的研究仍较少。该研究在制备典型城市污泥好氧堆肥获取其中温期、高温期物料的基础上,向堆肥中添加2种典型的FQs（ofloxacin,OFL;norfloxacin,NOR）,在不同FQs初始浓度（0,2.5,5.0 mg/kg）、含水率（50%、60%、70%）和通风量（0,15 mL/min）条件下,进行56 d的抗生素去除试验,控制各堆肥物料在其对应堆肥阶段温度（中温期物料,35℃;高温期物料,55℃）。结果表明:2种物料中FQs去除率均随着初始浓度上升而逐步下降,中温期物料最佳初始FQs浓度分别为5.0 mg/kg（OFL）、2.5 mg/kg（NOR）,对于高温期物料两者均为2.5 mg/kg;中温期物料中,FQs去除率随含水率增加先上升后下降,最佳含水率均为60%,高温期物料中,FQs去除率随含水率升高而逐步增加;2种物料中,通风量15 mL/min下的FQs去除率均明显高于未通风处理。与中温期物料对比,高温期物料中FQs去除过程需要较低的初始浓度和较高的含水率;在2种物料中,充分通风下FQs的去除率均明显高于未通风处理。     

含油污泥处理技术进展

石油工业生产的特征固体废物——含油污泥,是一种由石油烃、水、固体颗粒物和其他物质（如重金属）组成的固态/半固态复合物,因毒性和易燃性被归入危险废物管理。我国含油污泥年产量高达500万t,其中含有15%~50%的石油烃。含油污泥的处理要兼顾无害化和资源化。基于其组成、性质和危害,介绍了含油污泥的油品资源化分离法（离心、溶剂萃取、热解）和无害化剩余含油残渣处理法（焚烧、固化、生物处理）等国内外常用的处理方法。大体上,含油污泥的处理思路为,首先预处理降低含水率、提高含油率,再经油品分离法回收含油污泥中的石油烃,最后无害化处理剩余含油残渣。讨论了各方法的特点以及国内外研究进展,提出了含油污泥处理技术的发展建议。     

新时代国土整治与生态修复转型思考

针对全球变化影响下的国土空间和生态系统,生态文明建设和国土空间规划是中国在新时代的积极响应,国土整治与生态修复的转型和提升成为必然要求。在介绍国土整治与生态修复概念内涵的基础上,指出中国国土空间生态环境问题的复杂性和生态文明建设的新理念要求决定了国土整治与生态修复的转型。从工作理念、理论基础、技术体系和制度建设等方面,分析了当前国土整治与生态修复工作中存在的不足,主要包括整体综合理念滞后、理论基础体系欠缺、技术支撑相对薄弱、体制机制不尽完善等方面。针对这些不足,提出了新时代国土整治与生态修复转型的路径和策略,主要策略包括强化系统思维、提升理论体系、加强技术支撑、完善机制建设等内容,以期为国土整治与生态修复推进美丽中国建设提供科学依据。     

UASB启动运行特征及互营丙酸氧化菌定量分析

为揭示升流式厌氧污泥床（UASB）反应器启动运行效能与互营丙酸降解菌群数量之间的关系,以稀释的玉米淀粉生产废水为底物,考察了UASB启动期的运行特征,并采用实时荧光定量PCR技术（qPCR）分析了互营丙酸降解菌群（丙酸氧化菌和产甲烷菌）的演替规律.结果表明,在进水COD 2000mg/L和水力停留时间（HRT）24h条件下,经过38d的连续运行,COD去除率达到了91.9%.当HRT分阶段缩短至8h时,比产甲烷速率达到了315LCH₄/（kg COD·d）,且形成了沉降性能良好的颗粒污泥.qPCR检测结果表明,至少有5种已鉴定的丙酸氧化菌存在于UASB反应器中.Pelotomaculum propionicum为接种污泥中的主要丙酸氧化菌,约占检测到丙酸氧化菌总数的45.7%.它的数量随着HRT缩短不断减少.而Syntrophobacter sulfatireducens和S.wolinii的数量随着HRT缩短不断增加,并在启动完成时达到最大值,分别为1.3×10³,5.5×10³个16S rRNA基因拷贝数/ng DNA,演替成为成熟颗粒污泥中的优势丙酸氧化菌群.Methanobacterium和Methanosarcina为接种污泥中的主要氢营养型产甲烷菌和乙酸营养型产甲烷菌,其数量随着HRT的缩短而逐渐减少,而Methanospirillum和Methanosaeta的数量随HRT的缩短逐渐增加,成为成熟颗粒污泥中的优势产甲烷菌群.     

组配改良剂联合硅肥对Cd污染稻田的修复效果

选取湖南省浏阳市某Cd污染稻田进行田间试验,研究组配改良剂石灰石+海泡石（LS）、基施硅肥及叶面喷施硅肥对Cd污染稻田修复效果,结果表明：（1）基施硅肥90kg/hm²和叶面喷施硅肥（0.2,0.4g/L）对土壤pH值无明显影响,添加LS（2250,4500kg/hm²）的各处理均显著提高土壤pH值（P < 0.05）.（2）基施硅肥90kg/hm²分别降低土壤交换态、毒性特征浸出（TCLP）提取态Cd含量20.0%和18.5%,叶面喷施硅肥对土壤Cd两种提取态含量无明显影响,添加LS的各处理（2250,4500kg/hm²）分别使土壤交换态、TCLP提取态Cd含量降低25.8%~49.9%、26.4%~44.5%.（3）3种单一技术措施均能明显降低水稻各部位Cd含量,但降低糙米中Cd含量的效果低于3种技术措施的组合处理;“组配改良剂LS+基施硅肥+叶面喷施硅肥”各处理（JL1F1、JL1F2、JL2F1、JL2F2）使水稻糙米中Cd含量降低25.6%~70.5%.（4）“组配改良剂LS+基施硅肥+叶面喷施硅肥”的组合技术处理能显著降低土壤中Cd的有效性,显著降低水稻各部位中Cd含量,其中JL2F2处理效果最佳,能使对照糙米Cd含量从0.66mg/kg降低到0.19mg/kg,实现中重度Cd污染稻田的水稻安全生产.     

成都市施工扬尘排放特征研究

采用DustTRAK TM气溶胶（粉尘）监测仪对成都市112个不同类别的房建、市政工地施工扬尘进行测试,研究了不同类别施工扬尘的排放特征,分析了下风向扬尘浓度的变化趋势,并采用CALPUFF对成都市新都区某建筑工地的排放进行了模拟.结果表明：（1）成都市施工扬尘排放浓度约为0.13~2.91mg/m³,其中房建类施工平均浓度约为0.94mg/m³,高于市政施工;大型工地扬尘平均浓度约为0.61mg/m³,低于中型和小型工地;土方施工阶段平均浓度约为1.21mg/m³,远高于地基建设、主体建设、装饰阶段.（2）成都市施工扬尘呈现出高低浓度交替的周期性变化,其中房建工程土方施工阶段的高低浓度差值可达到0.6mg/m³以上.（3）施工扬尘在场界外下风向5~15m范围内会出现浓度增加的趋势,随后逐渐下降,在50m附近逐渐趋于稳定,稳定浓度介于0.1~0.2mg/m³.（4）CALPUFF模型能较好地从宏观角度来模拟成都地区施工扬尘的扩散趋势,但难以捕捉施工扬尘在下风向近距离的扩散特征.     

附着在不同微塑料表面的藻类结构与群落组成

选取水环境中常见的4种微塑料介质（聚丙烯（PP）、聚氯乙烯（PVC）、聚乙烯（PE）、聚对苯二甲酸乙二醇酯（PET））和一种自然介质（鹅卵石）进行野外生物膜的培养,以探究不同类型介质表面附着的生物膜的表观结构和藻类群落组成的差异特征.结果表明,鹅卵石与微塑料介质上的生物膜的形貌结构及藻类含量与组成特性均存在一定差异：在微塑料介质表面附着的藻类叶绿素a浓度普遍低于自然介质.实验进一步发现,不同的微塑料类型同样会对生物膜藻类含量以及功能特性存在一定影响：PET片上附着的藻类叶绿素a浓度最高（613.7μg/L）,PP片上最低（492.5μg/L）;然而,PP片上藻类的光合作用最大量子产量最高（0.443）.以上结论说明微塑料会改变附着藻类的生长情况和初级生产力,进而可能影响生物膜在水体中的碳循环过程,对水体净化及污染治理产生一定影响.