Effects of equipment loadings on geosynthetic-lined slope behaviour.

When combined in the lining and covering of waste-containment facilities, soil and geosynthetic components protect the environment by acting as a hydraulic barrier. Equipment loading may significantly increase the tensile stress induced in geosynthetic components, leading to a potential stability problem. Large equipment loadings may also result in a localized circular slip surface during construction operations. New analytical method based on discrete element modelling is proposed for estimating the distribution of tensile force developed in the individual geosynthetic components of the lining system and for evaluating the safety factor of slope failure due to equipment loading. The analytical results of an example are presented to demonstrate the applicability of the analytical method for the lining system of a waste landfill. The analyses of the example show that equipment loading provide a substantial increase in the tensile forces of the geosynthetic components of a lining system and that the possibility of shallow failure due to equipment loading increases as the slope becomes steeper. This method is a useful tool for analysing the lining system of waste landfills with complex lining components.     

Analysis of Roadside Inhalable Particulate Matter (PM10) in Major Korean Cities

A data analysis of three major Korean cities was conducted to assess roadside inhalable particulate matter 10 μm or smaller in aerodynamic diameter (PM₁₀), including temporal and meteorological variations, over a recent period of 4 to 6 years. The yearly roadside PM₁₀ concentrations presented a well-defined increasing trend or no trend depending on the roadside monitoring station. Most mean values exceeded or approximated the Korean standard of 70 μg/m³ per year for PM₁₀. A representative roadside diurnal trend was characterized by a distinct morning maximum. In most cases, the Sunday roadside concentrations were similar to or somewhat lower than the weekday concentrations, and the PM₁₀ concentrations presented a well-defined seasonal variation, with the maximum concentration in March. The monthly maximum concentrations observed in March were most likely attributable to Asian dust storms. In two metropolitan cities (Seoul and Busan), the frequency of days with roadside PM₁₀ concentrations exceeding the standard of 150μg/m³ per 24 h was much lower for the roadside monitoring stations than for the residential monitoring station, whereas in the third city (Daegu), this result was reversed. Interestingly, the average maximum concentrations observed for the roadside sites in Seoul and Busan during March were higher than those for the residential sites, suggesting that the roadside concentrations responded more to the dust storms than the residential areas. The relationship between the pollutant concentrations and five important meteorological parameters (solar radiation, wind speed, air temperature, relative humidity, and precipitation) showed that the number and type of meteorological variables included in the equations varied according to the monitoring station or season. Finally, the current results confirmed that attention should be given to the PM₁₀ exposure of residents living near roadways.     

Differences in Eye and Hand Movements of Novice and Experienced Press Operators

Presses are very widely used in industrial and commercial companies and are often the source of serious accidents occurring during operation. Most of the accidents are due to inadequate training of novice operators. Continuous recordings of eye and hand movements of five novice operators and five experienced operators in press operation were made. Significant difference between novice and experienced operators was observed in eye fixation time, eye movement patterns, hand dwell time, and eye-hand coordination. Also, differences were observed in spatial distribution of eye fixations during the die-closing portion of a stroke. There were no significant differences between novice and experienced operators in the eye and the hand movement time. The results could be used as basic data to establish a guide determining the method and training period to train novice operators.     

Screening and prioritizing the precursors of improvised explosive devices from commodity chemicals being controlled under Korean regulations

Improvised explosive devices (IEDs) have become an alternative method for terrorists or criminals who face difficulties in obtaining traditional explosives as threatening tools. The ease of obtaining precursor materials from commodity chemicals in the free market and the ease of generating bombs through the hands of novices have created problems. Controlling the potential precursors to defeat illegal acquisition is not trivial due to their widespread use as common merchandise among chemical industries and consumers. However, efforts to identify the potential precursors may be the first step for devising appropriate control measures. In this study, we proposed a systematic screening method for identifying potential IED precursors (IEDPs) from commodity chemicals, which are regulated by Korean controls. We identified 25 potential IEDPs from 3980 candidate chemicals that can be diverted into IEDs or homemade bombs but are not likely to be solely used as an IED. We also developed a methodology of prioritizing the potential precursor chemicals to assess the urgency of controls using a scoring system with four criteria: previous listing as an official precursor; past record of being encountered in criminal use; volume of commercial circulation, which denotes the probability of exposure to individuals; and the degree of regulatory counter-measures against illegal acquisitions that are currently effective in Korea.     

Stable isotope on the evaluation of water quality in the presence of WWTPs in rivers

Environmental Science and Pollution Research - We investigated the distribution of nitrogen compounds in Han River as well as two tributaries of Tancheon and Jungrangcheon. Particularly, we...     

Characteristics of roadside air pollution in Korean metropolitan city (Daegu) over last 5 to 6 years: temporal variations, standard exceedances, and dependence on meteorological conditions

The present study performed a roadside data analysis to provide baseline data for exploring associations between environmental exposure to four gaseous pollutants and health effects on residents living near roadways. The yearly roadside concentrations of CO and SO₂ showed a well-defined decreasing trend, whereas those of NO₂ and O₃ exhibited the reverse trend. In most cases, the diurnal trends of the roadside concentrations were well-defined for all seasons, plus the daytime concentrations were higher than the nighttime concentrations. In contrast to the other target pollutants, the daytime O₃ concentrations observed at the roadside sites were lower than those observed at the residential site, likely due to high-levels of fresh NO from traffic emissions that rapidly react with O₃, thereby reducing the O₃ roadside level. The Sunday roadside concentrations of CO, NO₂, and SO₂ were similar to or somewhat lower than the weekday concentrations. Conversely, for O_3, the Sunday roadside concentrations were similar to or somewhat higher than the weekday concentrations. The higher O₃ concentrations on Sunday may be due to the reduced titration from a decrease in NO_x emissions under VOC-limited conditions (low VOC/NO_x conditions). The monthly averages of O₃ concentrations exhibited the reverse seasonal variation to the other target compounds, with peak O₃ concentrations between April and June, and the second peak between August and October. It is also suggested that for O₃, the 8-h standard is more stringent than the 1-h standard, while for NO₂ and SO₂, the 1-h standard is more stringent than the 24-h standard. The multiple regression equations obtained from the relationship between the concentrations and five meteorological parameters indicated that the number and type of meteorological variables in the equations varied according to the pollutant, monitoring station, or season.     

Iron and organo-bentonite for the reduction and sorption of trichloroethylene

Hybrid barriers using dechlorination and immobilization were studied to remove trichloroethylene (TCE) in this study. Hybrid barriers of iron filings and organo (hexadecyltrimethylammonium, HDTMA)-bentonite were simulated in columns to assess the performance of the hybrid barriers. TCE reduction rate for the mixture of zero valent iron (ZVI) and HDTMA-bentonite was approximately seven times higher than that for ZVI, suggesting the reduction of TCE was accelerated when HDTMA-bentonite was mixed with ZVI. For the column of two separate layers of iron and HDTMA-bentonite, TCE reduction rate was nearly similar to that for ZVI alone, but the partition coefficient (Kd) was 4.5 times higher than that for ZVI only. TCE was immobilized in the first layer with HDTMA-bentonite due to sorption, and then dechlorinated in the second layer with iron filings due to reduction. The HDTMA-bentonite and minimally-desorbed HDTMA from the organo-bentonite are believed to contribute the increase in TCE concentration on iron surface so that more TCE could be available for reduction. Therefore, the incorporation of HDTMA-bentonite into ZVI not only can effectively retard the transport of chlorinated organic contaminants from landfill leachate or oil shock in subsurface environment, also can expedite the reduction rate of TCE.     

Selective recovery of Cu, Zn, and Ni from acid mine drainage

In Korea, the heavy metal pollution from about 1,000 abandoned mines has been a serious environmental issue. Especially, the surface waters, groundwaters, and soils around mines have been contaminated by heavy metals originating from acid mine drainage (AMD) and mine tailings. So far, AMD was considered as a waste stream to be treated to prevent environmental pollutions; however, the stream contains mainly Fe and Al and valuable metals such as Ni, Zn, and Cu. In this study, Visual MINTEQ simulation was carried out to investigate the speciation of heavy metals as functions of pH and neutralizing agents. Based on the simulation, selective pH values were determined to form hydroxide or carbonate precipitates of Cu, Zn, and Ni. Experiments based on the simulation results show that the recovery yield of Zn and Cu were 91 and 94 %, respectively, in a binary mixture of Cu and Zn, while 95 % of Cu and 94 % of Ni were recovered in a binary mixture of Cu and Ni. However, the recovery yield and purity of Zn and Ni were very low because of similar characteristics of Zn and Ni. Therefore, the mixture of Cu and Zn or Cu and Ni could be recovered by selective precipitation via pH adjustment; however, it is impossible to recover selectively Zn and Ni in the mixture of them.