浙江三界、谷来地区1/5万区域地质调查工作的主要进展

三界谷来地区主要出露中、新生代火山岩。进行 １／５万区域地质调查时，采用火山活动旋回－火山构造－火山地层－岩相、岩性－体化思路，按照同旋回火山机构或火山喷发区为单元，确定岩石地层单位和填图单元。火山岩划分为九种岩相类型，建立了两个岩相模式和一个三相一体成因模式。根据火山岩浆作用的旋回性及其产物与火山构造形迹时、空、成因一致性原理，将中、新生代火山岩浆作用分为四个火山活动旋回，圈定了相应的火山机构或火山喷发中心，建立了竹田头复活破火山演化模式。新生代玄武岩中发现二辉斜长麻粒岩等深源包体，为研究区域深部地质作用过程提供了证据。侵入岩按岩石谱系单元划分了七个岩石单元一个超单元，将侵入岩－潜火山岩－火山岩作为岩浆作用整体研究，为正确阐明岩浆作用及其演化规律奠定了基础。区域线型构造发育，与环形火山构造组合，形成火山岩区特有的线一环构造格局。中上元古界陈蔡群变质岩划分为上、下两个岩组，探讨了变质岩的原岩性质及其形成的大地构造环境。     

基于石墨烯构建的电化学传感器在环境监测中的应用

综述了基于石墨烯构建的电化学传感器在重金属、有毒气体、农药残留、酚类有机污染物等对环境造成一定危害的物质检测中的应用,并展望了石墨烯电化学传感器在环境监测领域中的发展。     

可离子化有机污染物对大型溞的毒性及QSAR研究

取代苯酚、苯胺和苯甲酸类化合物是在环境水体中具有较强生物毒性的芳香族可离子化有机化合物,它们在水体中对水生生物和水生生态系统都有较大危害。测定此类化合物在p H值为6、7.8和9的条件下对大型溞的24 h急性毒性,计算化合物在不同p H值条件下的中性态分子所占比例F0。研究毒性与F0的相关性,结果表明F0对取代苯酚和苯甲酸类化合物的毒性的影响较大而对取代苯胺毒性的影响很小。对于卤代苯甲酸类化合物,毒性与疏水性的相关性较好,但是羟基苯甲酸类化合物的毒性与疏水性参数的相关性很差,引入量子化学参数EHOMO和取代羟基个数NOH,可以改进苯甲酸类化合物的模型的质量。     

A2O工艺中雌激素的行为变化和去除机理

研究了厌氧-缺氧-好氧(A2O)活性污泥工艺对生活污水中天然雌激素雌酮(Estrone,E1)、17β-雌二醇(17β-Estradiol,E2)以及17α-乙炔基雌二醇(17α-Ethynylestradiol,EE2)的去除性能。在对COD、N和P具有良好去除效果的前提下,对E1、E2和EE2的去除率可分别达到92.7%、100%和62.7%。通过对各反应单元内3种雌激素的物料平衡分析,表明A2O工艺对雌激素的去除主要发生在厌氧段和好氧段。以失活污泥作为对照组,好氧硝化过程中雌激素去除的小试实验发现,好氧过程中E1、E2的去除主要依靠生物降解作用,而EE2的去除则主要依赖于活性污泥对其的吸附作用。     

通风速率对烟草废料堆肥腐熟及元素变化影响

以烟草废料为原料堆肥,设置不同的通风速率,通过对堆肥中温度、营养元素和腐殖质等指标变化的研究,揭示了通风速率对堆肥腐熟和主要元素变化的影响。结果表明,通风速率为0.1和0.2 m3/(h·m3)的处理的高温期持续时间在5 d以上,满足堆肥无害化卫生标准要求,堆肥积温以0.2 m3/(h·m3)的处理最高;堆肥结束时,通风速率为0.2和0.3 m3/(h·m3)处理的总碳含量降低率、总氮含量增加率及NO3--N含量增幅均强于0.1 和0.4 m3/(h·m3)的通风处理,且两处理的NH4+-N含量至堆肥结束时降至400 mg/kg阈值以下;通风速率为0.2 m3/(h·m3)的处理的终产品的腐殖化质数为1.91,达到腐熟阈值1.90。综合以上结果表明,0.2 m3/(h·m3)的通风速率较适于烟草废料堆肥腐熟和营养转化。     

Sedimentary record of polycyclic aromatic hydrocarbons in Lake Erhai, Southwest China

The temporal distribution of polycyclic aromatic hydrocarbons (PAHs) was investigated in a sediment core from Lake Erhal in Southwest China using gas-chromatography/mass spectrometry (GC/MS) method.The total organic carbon (TOC) normalized total PAHs concentrations (sum of US Environmental Protection Agency proposed 16 priority PAHs) ranged from 31.9 to 269 μg/g dry weight (dw),and were characterized by a slowly increasing stage in the deeper sediments and a sharp increasing stage in the upper sediments.The PAHs in the sediments were dominated by low molecular weight (LMW) PAHs,suggesting that the primary source of PAHs was low- and moderate temperature combustion processes.However,both the significant increase in high molecular weight (HMW) PAHs in the upper sediments and the vertical profile of diagnostic ratios pointed out a change in the sources of PAHs from low-temperature combustion to high-temperature combustion.The ecotoxicological assessment based on consensus-based sediment quality guidelines implied that potential adverse biological impacts were possible for benzo(ghi)perylenelene and most LMW PAHs.In addition,the total BaP equivalent quotient of seven carcinogenic polycyclic aromatic hydrocarbons (BaA,CHr,BbF,BkF,BaP,DBA and INP) was 106.1 ng/g,according to the toxic equivalency factors.Although there was no great biological impact associated with the HMW PAlls,great attention should be paid to these PAH components based on their rapid increase in the upper sediments.     

垃圾填埋场渗滤液污染控制技术研究进展

垃圾渗滤液是垃圾填埋过程中产生的一种有机浓度高、成分复杂的污水,对周边生态环境和人们身心健康影响极大。本文详细介绍了垃圾渗滤液的水质特征及国内外各类控制技术,并进行了对比分析,提出是源头控制重点,处理是保障的污染控制新思路。     

硫酸羟胺的自加速分解温度和稳定性研究

通过快速筛选热分析试验对硫酸羟胺热危险性进行定性分析,对其热分解过程进行初步研究,获得温度、压力变化规律;再运用C80微量热仪对硫酸羟胺进行深入分析,得到硫酸羟胺的化学反应动力学参数,根据Semenov模型计算其自加速分解温度（SADT）。试验结果表明：由RSD初步筛选试验得到硫酸羟胺在164．2℃时即发生分解放热;用C80法得到硫酸羟胺的起始热分解温度为137．1℃,并计算了该物质在3种典型包装下的自加速分解温度。由SADT得到储存、运输过程中硫酸羟胺的控制温度,从而为减少硫酸羟胺事故的发生提供必要的参考数据。     

城市生活垃圾卧式气流分选特性研究

利用处理能力100 kg/h的卧式气流分选机开展生活垃圾中塑料分选实验。实验结果表明:进风角度为10°、15°时,分别对应存在>8.5 m/s、7.7～9.3 m/s的风速范围,使塑料的纯度和分选效率达到80%以上;利用Fluent软件模拟,结果表明:进风角度>15°时,分选机内气流复杂,塑料纯度和分选效率的波动性大,仅存在较窄的风速范围可使总纯度和分选效率同时达到80%以上。     

Smooth surface fabrication in mask projection based stereolithography

The surface finish is critical for applications such as optics, micro-fluid flow and mechanical assembly, in which optical lenses, fluidic channels and rotating components are all required to be smooth. However, the stair-stepping effect is well known in the layer-based additive manufacturing processes, in which a three-dimensional model is approximated by a set of two-dimensional layers. Consequently the fabricated surfaces have poor surface finishes especially those that are close to the horizontal plane. In this paper, a novel approach for achieving improved surface finish is presented for the mask-image-projection-based stereolithography (MIP-SL) process. Theoretical models and parameter characterization are presented for the developed methods. Accordingly, the process planning and calibration approaches for fabricating smooth up-facing surfaces in the MIP-SL process have been developed. Multiple test cases based on various types of curved surfaces have been performed. A comparison of the build results based on the traditional and the newly developed approaches illustrates the effectiveness of our method.