Particulate matter concentration in ambient air and its effects on lung functions among residents in the National Capital Region, India

The World Health Organization has estimated that air pollution is responsible for 1.4 % of all deaths and 0.8 % of disability-adjusted life years. NOIDA, located at the National Capital Region, India, was declared as one of the critically air-polluted areas by the Central Pollution Control Board of the Government of India. Studies on the relationship of reduction in lung functions of residents living in areas with higher concentrations of particulate matter (PM) in ambient air were inconclusive since the subjects of most of the studies are hospital admission cases. Very few studies, including one from India, have shown the relationship of PM concentration and its effects of lung functions in the same location. Hence, a cross-sectional study was undertaken to study the effect of particulate matter concentration in ambient air on the lung functions of residents living in a critically air-polluted area in India. PM concentrations in ambient air (PM_1, PM_2.5) were monitored at residential locations and identified locations with higher (NOIDA) and lower concentrations (Gurgaon). Lung function tests (FEV₁, PEFR) were conducted using a spirometer in 757 residents. Both air monitoring and lung function tests were conducted on the same day. Significant negative linear relationship exists between higher concentrations of PM₁ with reduced FEV₁ and increased concentrations of PM_2.5 with reduced PEFR and FEV₁. The study shows that reductions in lung functions (PEFR and FEV₁) can be attributed to higher particulate matter concentrations in ambient air. Decline in airflow obstruction in subjects exposed to high PM concentrations can be attributed to the fibrogenic response and associated airway wall remodeling. The study suggests the intervention of policy makers and stake holders to take necessary steps to reduce the emissions of PM concentrations, especially PM_1, PM_2.5, which can lead to serious respiratory health concerns in residents.     

Effect of dust load on the leaf attributes of the tree species growing along the roadside

Dust is considered as one of the most widespread air pollutants. The objective of the study was to analyse the effect of dust load (DL) on the leaf attributes of the four tree species planted along the roadside at a low pollution Banaras Hindu University (BHU) campus and a highly polluted industrial area (Chunar, Mirzapur) of India. The studied leaf attributes were: leaf area, specific leaf area (SLA), relative water content (RWC), leaf nitrogen content (LNC), leaf phosphorus content (LPC), chlorophyll content (Chl), maximum stomatal conductance (Gs_max), maximum photosynthetic rate (A _max) and intrinsic water-use efficiency (WUEi). Results showed significant effect of sites and species for DL and the leaf attributes. Average DL across the four tree species was greater at Chunar, whereas, the average values of leaf attributes were greater at the BHU campus. Maximum DL was observed for Tectona grandis at Chunar site and minimum for Syzygium cumini at BHU campus. Across the two sites, maximum value of SLA, Chl and Gs_max were exhibited by S. cumini, whereas, the greatest value of RWC, LNC, LPC, A _max and WUEi were observed in Anthocephalus cadamba. A. cadamba and S. cumini exhibited 28 and 27 times more dust accumulation, respectively, at the most polluted Chunar site as compared to the BHU campus. They also exhibited less reduction in A _max due to dust deposition as compared to the other two species. Therefore, both these species may be promoted for plantation along the roadside of the sites having greater dust deposition.     

Adsorption–desorption of metolachlor and atrazine in Indian soils: effect of fly ash amendment

The effect of two fly ashes as soil amendment on the adsorption–desorption of metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylphenyl)] and atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) was studied in alluvial and laterite soils. The adsorption data for both the herbicides fitted well the Freundlich equation, and Freundlich adsorption coefficient (K _f) increased with an increase of fly ash amount. Both the fly ashes differed in their extent to increase herbicide sorption, and the effect was different in different soils. Atrazine was sorbed more in the soils/soils?+?fly ash mixtures than the metolachlor. The K _f values showed significant correlation with the amount of fly ash amendment (correlation coefficient, R?>?0.982). The desorption isotherms also fitted the Freundlich equation, and desorption showed hysteresis which increased with an increase in the content of fly ash amendment. The free energy change (ΔG) indicated that the sorption process is exothermic, spontaneous, and physical in nature. The study has shown that fly ash as soil amendment significantly increased the sorption of metolachlor and atrazine, but the effect is soil- and fly ash-specific.     

Multivariate analysis of potentially toxic metals in sediments of a tropical coastal lagoon

Surface sediments collected from the Lagos Lagoon, Nigeria, and three adjoining rivers were analysed for their physicochemical properties and pseudo-total concentration of the potentially toxic metals (PTM) Cd, Cr, Cu, Pb and Zn. The concentration of the PTM varied seasonally and spatially. Odo-Iyaalaro was observed to be the most polluted river, with highest concentrations of 42.1 mg kg^?1, 102 mg kg^?1, 185 mg kg^?1, 154 mg kg^?1 and 1040 mg kg^?1 of Cd, Cr, Cu, Pb and Zn, respectively, while Ibeshe River was the least contaminated, apart from a site affected by Cu from the textile industry. Some of the sediments were found to be above the consensus-based probable effect concentrations and Dutch sediment guideline for metals. Overall metal concentrations were similar to those reported for other tropical lagoon and estuarine systems affected by anthropogenic inputs as a result of rapid urbanisation. Due to the large number of samples, principal component analysis was used to examine relationships within the data set. Generally, sediments collected during the dry season were observed to have higher concentration of PTM than those collected during the rainy season. This means that PTM could accumulate over a prolonged period and then be released relatively rapidly, on an annual basis, into tropical lagoon systems.     

Effects of significant damage of flame gap surfaces in flameproof electrical apparatus on flame gap efficiency

Electrical apparatus for use in the presence of explosive gas atmospheres has to be specially designed to prevent the apparatus from igniting the gas. Flameproof design is one of several options, and one requirement is then that any holes and slits in the enclosure wall be designed to prevent a possible gas explosion inside the enclosure from being transmitted to an explosive gas cloud outside it. Current standards (IEC) require that joint surfaces have a surface roughness of <6.3 μm. Any damaged joint surface has be restored to this quality. The present investigation has demonstrated that flame gap surfaces in flameproof electrical apparatuses can suffer considerable mechanical and corrosive damage before the flame gaps no longer function satisfactorily. In some cases very significant mechanical surface damage in fact improves the gap performance. This indicates that current high costs of repairing and replacing flameproof electrical apparatus in process plants offshore and onshore can be reduced considerably without any increase of the explosion risk.     

Risk analysis and assessment methodologies in the work sites: On a review, classification and comparative study of the scientific literature of the period 2000-2009

The objective of this work is to determine and study, analyze and elaborate, classify and categorize the main risk analysis and risk-assessment methods and techniques by reviewing the scientific literature. The paper consists of two parts: a) the investigation, presentation and elaboration of the main risk-assessment methodologies and b) the statistical analysis, classification, and comparative study of the corresponding scientific papers published by six representative scientific journals of Elsevier B.V. covering the decade 2000-2009. The scientific literature reviewing showed that the risk analysis and assessment techniques are classified into three main categories: (a) the qualitative, (b) the quantitative, and (c) the hybrid techniques (qualitative-quantitative, semi-quantitative). The qualitative techniques are based both on analytical estimation processes, and on the safety managers-engineers ability. According to quantitative techniques, the risk can be considered as a quantity, which can be estimated and expressed by a mathematical relation, under the help of real accidents’ data recorded in a work site. The hybrid techniques, present a great complexity due to their ad hoc character that prevents a wide spreading. The statistical analysis shows that the quantitative methods present the highest relative frequency (65.63%) while the qualitative a lower one (27.68%). Furthermore the hybrid methods remain constantly at a very low level (6.70%) during the entire processing period.     

On the development of a new hybrid risk assessment process using occupational accidents’ data: Application on the Greek Public Electric Power Provider

The occupational accidents have a major impact upon human integrity and also bring about high costs for the social health and insurance system of a country. In addition, risk analysis is an essential process for the safety policy of a company, having as main aim the effacement of any potential of damage in a productive procedure, while the quantified risk evaluation is the most crucial part of the whole procedure of assessing hazards in the work. The main goal of this study is double: a) the development and presentation of a new hybrid risk assessment process (HRAP) and b) the application of HRAP in the Greek Public Power Corporation (PPC) (the unique electric power provider and the largest industry in Greece), by using occupational accidents that have been recorded, during the 12-year period of 1993-2004. The new process consists of four distinct phases a) the hazard sources’ identification phase, b) the risk consideration phase, c) the risk-evaluation phase, and d) the phase of the risk assessment and safety-related decision making. The results show that in some cases the risk value has been calculated in PPC to be higher than 500 (in the risk rating of 0-1000), which imposes the taking of suppressive measures for abolishing the danger source, while the fatal accident frequency rate (per 10⁸ man-hrs) is FAFR ≅ 2.4.     

Building Safety indicators: Part 2 – Application,practices and results

Petroleum exploration and production in the Barents Sea is a controversial topic. The Goliat field outside the northern coast of Norway will be the first offshore oil development in this region, with planned production start in 2013–2014. Avoiding major accidents at Goliat is critical; not only to reduce the risks to human lives and the environment, but also to gain political acceptance. Providing early warnings of major accidents for Goliat is one of the main objectives of the research project ‘Building Safety’. The objective of this paper is to describe the development of early warnings in the form of indicators. In addition, the paper includes an overview of current status of early warnings of accidents in other major hazard industries; the nuclear power industry, the chemical process industry, and aviation. Experiences from these industries, including lessons learned from recent major accidents, have been used as important input to the development of early warning indicators.     

Feasibility study of rainwater harvesting system in Sylhet City

In rural areas in Bangladesh, groundwater is the principal source of water supply. This underground water is available in considerable amount in shallow aquifers. It is free from pathogenic microorganisms and hence water-borne diseases. In plain lands, other than hilly areas, water supply to 97% rural population comes from tube-wells, which is regarded to be a phenomenal achievement in preserving public health. Besides, a dependable water supply system all throughout the country is offset by two factors: (a) high salinity in surface plus groundwater in coastal areas; (b) want of suitable groundwater aquifers in hilly areas and the high cost of setting up tube-wells due to deep underground water table and stony layers. However, presence of arsenic in underground water now poses a serious threat to the success once made in water supply by setting up of manually operated tube-wells in the village areas—the achievement is now on the brink of total collapse. In about 61 districts out of 64, presence of arsenic exceeds a quantity of 0.05 mg/1, a permissible limit as per Bangladeshi water quality standard. Harvesting rainwater can be a pragmatic solution to this problem, which is common in many places in Sylhet especially in the hilly areas on the north eastern part of the city. This can be an alternative source of drinking water because of availability of rainwater from March to October. Heavy rain occurs from end of May till mid September, which is commonly known as the rainy season. This paper focuses on the possibility of harvesting rainwater in rural communities and thickly populated urban areas of Sylhet. It also demonstrates the scopes of harvesting rainwater using simple and low-cost technology. With setting up of a carefully planned rainwater storage tank, a family can have all of its drinking water from rain. Planned use of rainwater through rainwater harvesting in the roof catchments may fulfill the entire annual domestic water demand of a family in the rural areas of Bangladesh.     

Potential effects on the marine environment of dredging of the Bonny channel in the Niger Delta

This study is an assessment of the possible effects of the dredging project on the water quality of the surrounding environment. Water quality data for the Bonny offshore river were collected. The parameters assessed were temperature, dissolved oxygen (DO), pH, biochemical oxygen demand (BOD), total dissolved solids (TDS), total suspended solids (TSS), nitrogen as nitrate, and phosphate. The concentrations of TDS, TSS, and nitrate far exceeded the permissible standard. There were significant differences between the dry and rainy season values of BOD5, TDS, TSS, nitrate, and phosphate. Also, the sediment physicochemical analysis indicated the presence of heavy metals such as Pb, Fe, Cd, Zn, Cr, and elements such as Ca, K, and Na. Following an assessment of the potential impact of the project using interaction matrix and checklist questionnaires, results showed that the major physicochemical parameters influenced by dredging are DO, TDS, TSS, heavy metals and calcium, potassium, and sodium. Mitigation measures for eliminating or reducing the negative impacts of dredging are presented.