Study of vehicle speeds on a major highway in Ghana: implication for monitoring and control

OBJECTIVE: Vehicular speeds have been identified to be at the core of road accident severity and frequency globally. Whereas speed control is a fundamental priority and the cornerstone of road safety in the developed world, the subject is at rudimentary stages in most developing countries thus making research into vehicle speeds in developing nations imperative. The main aim of the study was to establish two major speed parameters, namely the mean speed and dispersion, and their implications for more extensive and long-term speed monitoring in Ghana. METHODS: Research workers stationed themselves in a parked car and used a radar gun to unobtrusively measure the travelling speeds of 4,163 vehicles over two 24-hour periods at two separate sites on one of the main inter-urban roads (Accra-Kumasi). Both sites were settled areas with posted speed limits of 50 km/hr. RESULTS: Over 95% of vehicles travelled above the posted speed limit of 50 km/hr. Vehicles on an average travelled at 87 km/hr, (95% CI=87, 88). Variation in speeds was wide, with a standard deviation of 18 km/hr for all classes of vehicles, and with a range of 40 to 187 km/hr. The highest vehicular speed was associated with the private car (97.6+/-18.3 km/hr) followed by large buses (93.6+/-13.3 km/hr) and the least was with heavy trucks (73.8+/-12.9 km/hr). CONCLUSION: The excessive vehicular speeds coupled with the wide speed variations explain in part the high incidence of traffic crashes and fatalities on the Accra-Kumasi highway. An integrated speed monitoring and control program, and realigning the highway to by-pass small and medium settlements would be required as a long-term measure for the reduction of speed-related road traffic crashes, fatalities, and injuries in Ghana.     

The impact of agroforestry combined with water harvesting on soil carbon and nitrogen stocks in central Chile evaluated using the ICBM/N model

Soil organic carbon (SOC) and total nitrogen (N) stocks in an agroforestry system with water harvesting were analysed in a field experiment and the results compared with those of other crop management systems in the Mediterranean zone of central Chile. Agroforestry with water harvesting showed higher positive effects on N stocks, mainly in the upper soil layer, than the other crop management systems. However, soil analysis revealed a lack of differences between treatments, a fact that might be related mainly to the short study time (12 years) and the high spatial variability in these soil properties at the experimental site. In addition, the Introductory Carbon Balance Model that simulates N processes (ICBM/N) was evaluated for simulating trends in SOC and N stocks in the field experiment. Soil data collected between 1996 and 2008 in the field experiment and primarily literature data sets were used to test ICBM/N and its performance was evaluated by considering uncertainty in model inputs using Generalised Likelihood Uncertainty Estimation (GLUE) methodology. The GLUE estimates (5% and 95%) and measured SOC and N stocks were in satisfactory agreement. The observed SOC and N stocks were bracketed by the uncertainty bands in 70% and 80% of the simulations, respectively. Sensitivity analysis showed the model to be most sensitive to C parameters, such as the humification coefficient (h). The results of this study show that ICBM/N can be an effective tool for estimating SOC and N stocks from agroforestry combined with water harvesting systems in the Mediterranean zone of central Chile over the medium term. However, they also indicate that additional data sets are needed to redefine the parameter distributions in the model and thus to predict trends in SOC and N stocks in the future.     

Ash deposition impact on the energy performance of photovoltaic generators

A little known side effect of the atmospheric air pollution is the degradation of photovoltaic (PV) cells’ performance due to the deposition of solid particles varying in composition, size and origin. In this context, an experimental-based investigation is conducted in order to compare the energy performance of two identical pairs of PV-panels; the first being clean and the second being artificially polluted with ash, i.e. a by-product of incomplete hydrocarbons’ combustion mainly originating from thermal power stations and vehicular exhausts. A series of systematic measurements of current intensity, voltage output and solar radiation are executed simultaneously for the clean and the polluted PV-panel, so that the effect of several mass depositions on the PVs’ power output, energy yield and conversion efficiency may be determined. According to the results, a considerable deterioration of the PV-panels’ performance is obtained, i.e. almost 30% energy reduction per hour or 1.5% efficiency decrease (in absolute terms) for ash accumulation on the panels’ surface reaching up to 0.4 mg/cm².     

Seven suppositions about energy security in the United States

Changing the patterns of energy use requires investigating how energy consumers - not experts - conceive of energy challenges. This article explores the varying beliefs, attitudes, and views on energy security in the United States among experts and residents. Based primarily on an academic literature review to distill expert views, and a survey distributed to hundreds of residents in the U.S. to capture consumer views, the study begins by explaining its methodology before identifying seven suppositions related to energy security. These suppositions involve security of fuel supply, energy democracy, energy research and development, affordability of energy services, environmental pollution, and climate change adaptation and mitigation. The second section of the study tests these suppositions with a survey distributed to 427 respondents in the United States. Three suppositions are supported, two are unsupported, and two are neither supported nor unsupported. The final section of the study offers implications for U.S. energy policy and scholarship.     

Changes of AhR-mediated activity of humic substances after irradiation

Humic substances (HS) and natural organic matter (NOM) are natural organic compounds ubiquitous in the environment. However, some studies indicate that both HS and NOM can act as xenobiotics, e.g. induce hormone-like effects in fish, amphibians and invertebrates. Molecules of these substances contain a number of aromatic rings and conjugated double bonds--the so called chromophores. Irradiation of dissolved HS and NOM can lead to a series of photochemical reactions which can act on these substances itself, or on other substances present in aquatic environment along with HS and NOM such as e.g. xenobiotics. In our previous study, we have found significant interactions of five humic acids (HA) with cytosolic aryl hydrocarbon receptor (AhR) in an in vitro bioassay based on H4IIE-luc cells. In the present study, we have studied the changes in AhR-mediated activities both of HS and NOM after irradiation that simulated natural solar light. Nine different HS and two NOM samples were irradiated in Pyrex tubes with a medium-pressure mercury lamp for a duration of 0 to 52 h (which corresponds to 0-52 d natural solar radiation). Original concentrations of the samples were 50 mg L(-1), and the greatest concentration of HS and NOM photoproducts subsequently tested in the bioassay was 17 mg L(-1), which is an environmentally relevant concentration. After irradiation the absorbances of all the samples were less than the original materials. The AhR-mediated activity of the HA-Fluka and HA Sodium Salt were partially decreased by irradiation. The activities of other HS and NOM, that were either AhR-active or -inactive were not changed by irradiation. The results of the study demonstrate that AhR-mediated activities of two active HA is caused by both photo-stable and photo-labile AhR activators, while the other three active HA contain only photo-stable AhR activators. Potential mechanisms of the observed irradiation-induced changes in AhR-mediated activities are discussed.     

Analysis of radiocaesium in the Lebanese soil one decade after the Chernobyl accident

Fallout from the Chernobyl reactor accident due to the transport of a radioactive cloud over Lebanon in the beginning of May 1986 was studied 12 years after the accident for determining the level of (137)Cs concentration in soil. Gamma spectroscopy measurements were performed by using coaxial high sensitivity HPGe detectors. More than 90 soil samples were collected from points uniformly distributed throughout the land of Lebanon in order to evaluate their radioactivity. The data obtained showed a relatively high (137)Cs activity per surface area contamination, up to 6545Bqm(-2) in the top soil layer 0-3cm. The average activity of (137)Cs in the top soil layer 0-3cm in depth was 59.7Bqkg(-1) dry soil ranging from 15 to 119Bqkg(-1) dry soil. The horizontal variability was found to be about 45% between the sampling sites. The depth distribution of total (137)Cs activity in soil showed an exponential decrease. Estimation of the annual effective dose due to external radiation from (137)Cs contaminated soil for selected sites gave values ranging from 19.3 to 91.6 micro Svy(-1).     

Generic approaches to transfer

A review of methods which have been used to describe and predict transfer of radionuclides in biota was undertaken. The intent was to identify approaches that might prove useful in extending predictive estimates to other organisms and environments. Empirical approaches, such as found in the use of transfer factors, were examined. Kinetic methodologies were also presented. Allometric functions, with their ability to make broad generalizations, were also discussed. Data from several earlier radioecological assessments were tested for their potential utility in developing allometric relationships, with the result implying that such an approach might prove useful.     

The value of Seasonal Correction Factors in assessing the health risk from domestic radon: a case study in Northamptonshire, UK

Following an intensive survey of domestic radon levels in the United Kingdom (UK), the former National Radiological Protection Board (NRPB), now the Radiation Protection Division of the Health Protection Agency (HPA-RPD), established a measurement protocol and promulgated Seasonal Correction Factors applicable to the country as a whole. Radon levels in the domestic built environment are assumed to vary systematically and repeatably during the year, being generally higher in winter. The Seasonal Correction Factors therefore comprise a series of numerical multipliers, which convert a 1-month or 3-month radon concentration measurement, commencing in any month of the year, to an effective annual mean radon concentration. In a recent project undertaken to assess the utility of short-term exposures in quantifying domestic radon levels, a comparative assessment of a number of integrating detector types was undertaken, with radon levels in 34 houses on common geology monitored over a 12-month period using dose-integrating track-etch detectors exposed in pairs (one upstairs, one downstairs) at 1-month and 3-month resolution. Seasonal variability of radon concentrations departed significantly from that expected on the basis of the HPA-RPD Seasonal Correction Factor set, with year-end discontinuities at both 1-month and 3-month measurement resolutions. Following this study, monitoring with electrets was continued in four properties, with weekly radon concentration data now available for a total duration in excess of three and a half years. Analysis of this data has permitted the derivation of reliable local Seasonal Correction Factors. Overall, these are significantly lower than those recommended by HPA-RPD, but are comparable with other results from the UK and from abroad, particularly those that recognise geological diversity and are consequently prepared on a regional rather than a national basis. This finding calls into question the validity of using nationally aggregated Seasonal Correction Factors, especially for shorter exposures, and the universal applicability of these corrections is discussed in detail.     

Efficacy of natural biocide on control of microbial induced corrosion in oil pipelines mediated by Desulfovibrio vulgaris and Desulfovibrio gigas

We compared the efficacy of a natural biocide with four chemical tetrakishydroxymethyl phosphonium sulfonate, benzyl trimethyl ammonium chloride, and formaldehyde, glutaraldehyde, to control microbial induced corrosion in oil pipelines. The efficacy of biocides were monitored against Desulfovibrio vulgaris and Desulfovibrio gigas in experimental pipes by measuring cell counts, H2S production, Fe(II) production, production of extracellular polymeric substances and structure of biofilm. The treatment with cow urine had minimum planktonic cell counts of 3 102 CFU/mL as well as biofilm cell counts of 9 101 CFU/mL as compared with tetrakishydroxyl methyl phosphonium sulfonate, benzyl trimethyl ammonium chloride, formaldehyde and glutaraldehyde. Sulfide production was the lowest with cow urine (0.08 mmol/L), followed by tetrakishydroxymethyl phosphonium sulfonate 0.72 mmol/L. On day 90 of treatment, Fe(II) production was also found to be the lowest with cow urine. The scanning electron microscopic studies indicated that the biofilm bacteria were killed by cow urine. These results demonstrate the cow urine mediated control of microbially induced corrosion, and this is indicative of its potential as a viable substitute of toxic biocides. To the best of our knowledge, this seems to be the first report which screens possible biocidal activity by cow urine as compared to the most common biocides which oil industry is currently using.