Natterer’s bat (Myotis nattereri Kuhl, 1818) hawks for prey close to vegetation using echolocation signals of very broad bandwidth

We present a hitherto unknown prey perception strategy in bats: Myotis nattereri (Vespertilionidae, Chiroptera) is able to perceive prey by echolocation within a few centimeters of echo-cluttering vegetation, by using frequency-modulated search signals of very large bandwidth (up to 135 kHz). We describe the species’ search behavior and echolocation repertoire from the field and from experiments in a flight tent. In the field, bats varied signal parameters in relation to their distance from vegetation and usually flew close to vegetation. In the flight tent, M. nattereri detected and localized prey by echolocation alone as close as 5 cm from vegetation. Apparently, the bats were able to tolerate some overlap between prey and clutter echoes. Passive prey cues (vision, olfaction, prey-generated sounds) were not used in prey perception. The bats selected prey by size. The animals performed aerial catches and produced approach sequences typical for aerial hawking bats, but were able to do so within a few centimeters of the substrate. M. nattereri thus has access to silent, suspended prey very close to vegetation (e.g., spiders, and caterpillars on threads). Received: 29 September 1999 / Received in revised form: 12 February 2000 / Accepted: 12 February 2000     

Assessing the Geographic Representativeness of Genebank Collections: the Case of Bolivian Wild Potatoes

Abstract: Genebank collection databases can be used for ecogeographical studies under the assumption that the accessions are a geographically unbiased sample. We evaluated the representativeness of a collection of wild potatoes from Bolivia and defined and assessed four types of bias: species, species-area, hotspot, and infrastructure. Species bias is the sampling of some species more often than others. Species-area bias is a sampling that is disproportionate to the total area in which a species is found. Hotspot bias is the disproportionate sampling of areas with high levels of diversity. Infrastructure bias is the disproportionate sampling of areas near roads and towns. Each of these biases is present in the Bolivian wild potato collection. The infrastructure bias was strong: 60% of all wild potato accessions were collected within 2 km of a road, as opposed to 22%, if collections had been made randomly. This analysis can serve as a guide for future collecting trips. It can also provide baseline information for the application of genebank data in studies based on geographic information systems.     

A survey of antennal responses by five species of coniferophagous bark beetles (Coleoptera: Scolytidae) to bark volatiles of six species of angiosperm trees

Summary. Using Porapak Q traps, we collected the bark volatiles of six angiosperm trees native to British Columbia: black cottonwood, Populus trichocarpa Torr. & A. Gray (Salicaceae), trembling aspen, P. tremuloides Michx. (Salicaceae), paper birch, Betula papyrifera Marsh. (Betulaceae), bigleaf maple, Acer macrophyllum Pursh (Aceraceae), red alder, Alnus rubra Bong. (Betulaceae), and Sitka alder, A. viridis ssp. sinuata (Regel) á. L?ve & D. L?ve (Betulaceae). Utilising coupled gas chromatographic-electroantennographic detection analysis, the captured volatiles were assayed for antennal responses in five species of coniferophagous bark beetles (Coleoptera: Scolytidae), sympatric with most or all of the angiosperm trees: the Douglas-fir beetle, Dendroctonus pseudotsugae Hopkins, the mountain pine beetle, D. ponderosae Hopkins, the spruce beetle, D. rufipennis (Kirby), the western balsam bark beetle, Dryocoetes confusus Swaine, and the pine engraver, Ips pini (Say). The identities of 25 antennally-active compounds were determined by coupled gas chromatographic-mass spectroscopic analysis, and co-chromatographic comparisons with authentic chemicals. The compounds identified were: hexanal, (E)-2-hexenal, (Z)-3-hexen-1-ol, 1-hexanol, heptanal, α-pinene, frontalin, benzaldehyde, β-pinene, 2-hydroxycyclohexanone, 3-carene, limonene, β-phellandrene, benzyl alcohol, (E)-ocimene, salicylaldehyde, conophthorin, guaiacol, nonanal, methyl salicylate, 4-allylanisole, decanal, thymol methyl ether, (E)-nerolidol, and dendrolasin. A number of these compounds are known semiochemicals that are active in the behaviour of other organisms, including bark beetles, suggesting a high degree of semiochemical parsimony. Antennally-active compounds ranged from seven in A. viridis to 17 in P. trichocarpa. The fewest number of compounds (9) were detected by I. pini and the largest number (24) were detected by D. pseudotsugae. Six compounds excited the antennae of all five species of bark beetles. The large number of antennally-active compounds detected in common by numerous bark beetles and present in common in numerous nonhost trees supports the hypothesis of olfaction-based recognition and avoidance of nonhost angiosperm trees during the process of host selection by coniferophagous bark beetles. Received 13 December 1999; accepted 14 March 2000     

Application of a “closed-can” technique for measuring radon exhalation from mine samples of Punjab, Pakistan

Using the closed-can technique, radon exhalation rate measurements have been carried out for shale and coal samples collected from various mines located in the Chakwal and Makarwal areas of Pakistan. For the two areas, the measured average values of the exhalation rates from shale are 1.45±0.13 and 0.67±0.25 Bq m⁻² h⁻¹ and for coal are 1.0±0.03 and 0.65±0.32 Bq m⁻² h⁻¹, respectively. These values are much lower than the measured exhalation rates from alum-shale-based Nordic concrete which has values in the 50–200 Bq m⁻² h⁻¹ range. The lower values of the measured exhalation rates from the shale and coal deposits in the Chakwal and Makarwal areas are indicative of their lower uranium contents and mine workers in these areas do not face any abnormal health hazard due to radon since the exhalation rates have been found to be on the low side.     

Responding to a policy mandate to collaborate: structuring collaboration in the collaborative forest landscape restoration program

The Collaborative Forest Landscape Restoration Program (CFLRP) aims to expand the pace and scale of forest restoration on national forests in the United States. The program requires candidate projects to develop landscape-scale forest restoration proposals through a collaborative process and continue to collaborate throughout planning, implementation, and monitoring. Our comparative case analysis of the initial selected projects examines how existing collaborative groups draw on past experience of collaboration and the requirements of a new mandate to shape collaborative structures as they undertake CFLRP work. While mandating collaboration appears contrary to what is often defined as an informal and emergent process, mandates can encourage stakeholder engagement and renew commitment to overcome past conflict. Our findings also suggest that a collaborative mandate can lead to increased attention and scrutiny, prompting adjustments to collaborative process and structure. As such, mandating collaboration creates dynamic tensions between past experience and new requirements for collaborative practice.     

Two-echelon closed-loop supply chain deterministic inventory models in a batch production environment

This paper considers a two-echelon closed-loop supply chain consisting of a manufacturer and a remanufacturer at the upper echelon and a retailer at the lower echelon. The retailer faces a constant demand from customers, which is satisfied through recovered and new products received from the remanufacturer and the manufacturer, respectively. The manufacturer produces the product with finite rate, whereas the recovery of returned product is instantaneous at the remanufacturer. We develop three models to determine the optimal production-inventory policy of the players for minimizing the joint total cost of the system. In the first model, the retailer receives the product in batches from the manufacturer and the remanufacture simultaneously, whereas in the second and third models, the batches are received alternatively. In the third model, however, the procurement of raw material at the manufacturer is also considered. Numerical illustration is presented to examine the impact of certain key parameters.     

Comparative study on effect of blending,thermal barrier coating (LHR) and injector nozzle geometry on biodiesel-fuelled engines

Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al₂O₃) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation.