Natural Weathering Studies of Polypropylene

Polypropylene (PP) has achieved a dominating position and hence, their consumption increases thereby littering, which lead to environmental pollution. Photodegradation seems to be a better choice because of naturally available sunlight as energy source for degradation. The present work involves the study of the variation of degradation behavior of PP film during tropical summer and winter seasons. The photodegradation is followed by Fourier transform infrared (FTIR) spectroscopic technique. Various indices like hydroxyl, carbonyl, vinylidene, lactones, ester, carboxylic acid and crystallinity are calculated and these values increased after a brief induction period. The variation in the mechanical properties like tensile strength and elongation at break percentages are determined. The scanning electron microscopic (SEM) images of weathered PP showed surface cracks when carbonyl index value increases sharply and the mechanical properties show a sudden decrease. Attempted life time prediction using mathematical models showed that the carbonyl growth is more affected by ultraviolet (UV) and cumulative total solar radiation for PP weathered during summer. The loss in tensile strength of PP weathered during summer is more dependent on the average temperature and the UV portion of the total solar radiation whereas, intensity of UV radiation has profound effect on the tensile strength of PP weathered during winter.     

Nanofiltration of concentrated and salted tuna cooking juices

Tuna cooking juice from a Tunisian tuna-processing unit has a high level of polluting load: chemical oxygen demand (COD) is comprised between 4 and 20 g L⁻¹, nitrogen kjedahl (NK) between 0.6 and 3 g L⁻¹ and dry matter between 120 and 160 g L⁻¹. The juice has thus to be treated before being rejected into the environment. This paper considers the nanofiltration (NF) of these concentrated organic/inorganic mixtures using an AFC 30 (NF) membrane. The work focusses on the effect of organic and inorganic matters on the permeate flux and rejections of these matters. For this purpose, mixtures of salt and organic pollution (COD), used as model solutions, were prepared by the dilution of a typical industrial tuna cooking juice. The permeate flux was found to decrease when salt and organic matter concentrations increase. The recovery rate in organic matter decreases with increasing salt or organic matter content and the recovery rate of salt decreases when the COD concentration increases.     

Seasonal Differences in the Levels of Gaseous Air Pollutants in the Vicinity of a Waste Dump

Hydrogen sulphide, ammonia, nitrogen dioxide, mercaptans and sulphur dioxide (H₂S, NH₃, NO₂, R-SH, SO₂) concentrations were measured at the location in the vicinity of the waste dump to determine the air pollution level of these pollutants prior to the operation of the Mobile Thermal Treatment Plant. Samples were collected over one year period. Seasonal differences, and the influence of meteorological parameters (temperature, relative humidity, pressure and wind direction) on the air pollution levels were studied. Results show relatively low concentrations of H₂S, NO₂, R-SH and SO₂, while NH₃ levels were higher compared to the guideline values. Good weather conditions (high air pressure and low relative humidity) are connected to long range transport of NO₂, while higher temperatures result in elevated NH₃ and R-SH concentrations. Because of the predominant northeast wind direction (the same as the waste dump direction), the contribution of air pollution from the direction of the waste dump at the measuring site is significant, but that does not necessarily mean that the pollutants originated from that source.     

Physico-Chemical Quality of Drinking Water in Rohtas District of Bihar

Water Quality Survey of Rohtas district of Bihar was conducted. Samples were collected from differentsources and analysed. 209 samples were collectedfrom 196 villages. Results of water quality surveyidentified the problem areas in respect of high iron,manganese, fluoride, nitrate and brackishness of water in the district.     

Lead Solubilization and Accumulation by Two Strains of Pseudomonas Obtained from a Contaminated Alfisol's Effluent in Southwestern Nigeria

Two strains of Pseudomonas species (B₂ and D₅)selected from an array of lead solubilizing and accumulatingbacteria obtained from the effluent contaminated soil samples of abattery manufacturing factory were studied. Increase in pH between 4.0 and 6.0 favoured the growth of isolates: Peaklog₁₀ cfu mL^–1 values of 7.1, 7.5 and 8.5 wereobtained at pH 4, 5 and 6, respectively.Cell bound lead concentrations for B₂ (0.34 mg mL^–1)and D₅ (0.30 mg mL^–1) obtained by direct contact withPbs were greater than lead concentrations of 0.89 and 0.25 mg mL^–1 for B₂ and D₅, respectively,obtained in dialyzed cultures. These cell bound lead concentration in undialyzed cultures were alsogreater than lead concentrations of 0.03 and 0.07 mg mL^–1 for B₂ and D₅ in culture supernatants. Glucose addition did nor improve lead accumulation in the isolates.Exploitation of such isolates for the biotreatment of lead ladeneffluent was conducted.     

Soil contamination of heavy metals in the Katedan Industrial Development Area, Hyderabad, India

Studies on quantitative soil contamination due to heavy metals were carried out in Katedan Industrial Development Area (KIDA), south of Hyderabad, Andhra Pradesh, India under the Indo-Norwegian Institutional Cooperation Programme. The study area falls under a semi-arid type of climate and consists of granites and pegmatite of igneous origin belonging to the Archaean age. There are about 300 industries dealing with dyeing, edible oil production, battery manufacturing, metal plating, chemicals, etc. Most of the industries discharge their untreated effluents either on open land or into ditches. Solid waste from industries is randomly dumped along roads and open grounds. Soil samples were collected throughout the industrial area and from downstream residential areas and were analysed by X-ray Fluorescence Spectrometer for fourteen trace metals and ten major oxides. The analytical data shows very high concentrations of lead, chromium, nickel, zinc, arsenic and cadmium through out the industrial area. The random dumping of hazardous waste in the industrial area could be the main cause of the soil contamination spreading by rainwater and wind. In the residential areas the local dumping is expected to be the main source as it is difficult to foresee that rain and wind can transport the contaminants from the industrial area. If emission to air by the smokestacks is significant, this may contribute to considerable spreading of contaminants like As, Cd and Pb throughout the area. A comparison of the results with the Canadian Soil Quality Guidelines (SQGL) show that most of the industrial area is heavily contaminated by As, Pb and Zn and local areas by Cr, Cu and Ni. The residential area is also contaminated by As and some small areas by Cr, Cu, Pb and Zn. The Cd contamination is detected over large area but it is not exceeding the SQGL value. Natural background values of As and Cr exceed the SQGL values and contribute significantly to the contamination in the residential area. However, the availability is considerably less than anthropogenic contaminants and must therefore be assessed differently. The pre- and post-monsoon sampling over two hydrological cycles in 2002 and 2003 indicate that the As, Cd and Pb contaminants are more mobile and may expect to reach the groundwater. The other contaminants seem to be much more stable. The contamination is especially serious in the industrial area as it is housing a large permanent residing population. The study not only aims at determining the natural background levels of trace elements as a guide for future pollution monitoring but also focuses on the pollution vulnerability of the watershed. A plan of action for remediation is recommended.     

Measurement of particulate phase polycyclic aromatic hydrocarbon (PAHs) around a petroleum refinery

A study on concentrations of ambient particulates viz. total suspended particulate matters (TSP), respirable suspended particulate matter (RSPM) and polycyclic aromatic hydrocarbons (PAH) were carried out at six sites around the Asia’s largest, 12 MMTPA, petroleum refinery in west coast of India. PAH concentrations are correlated with each other in these sites, suggesting that they have related sources and sinks. The present article discusses the monitoring aspects such as sample collection, pretreatment and analytical methods and compares the monitored levels for assessing the source receptor distribution pattern. The main sources of RSPM and PAHs in urban air are automobile exhaust (CPCB, Polycyclic aromatic hydrocarbons (PAHs) in air and their effects on human health. “”, 2003; Manuel et al., Environmental Science and Technology, 13: 227–231, 2004) and industrial emissions like petroleum refinery (Vo-Dinh, Chemical analysis of polycyclic aromatic hydrocarbons, Wiley: New York, 1989; Wagrowaski and Hites, Environmental Science and Technology, 31: 279–282, 1997). Polycyclic aromatic hydrocarbons (PAH) are ubiquitous constituents of urban airborne particulate mostly generated by anthropogenic activities (Li et al., Environmental Science and Technology, 37:1958–2965, 2003; Thorsen et al., Environmental Science and Technology, 38: 2029–2037, 2004; Ohura et al., Environmental Science and Technology, 32: 450–455, 2004) and some of them are of major health concern mainly due to their well-known carcinogenic and mutagenic properties (Soclo et al., Marine Pollution Bulletin, 40: 387–396, 2000; Chen et al., Environment International, 28: 659–668, 2003; Larsen and Baker, Environmental Science and Technology, 32: 450–455, 2003). Limited information is available on PAHs contributions from refineries to ambient air. Hence this study would not only create a database but also provide necessary inputs towards dose-response relationship for fixing standards. Also, since it acts as precursor to green house gas, the data would be useful for climate change assessments. The objective of this article is to find out the concentration of PAHs in particulate matter around petroleum refinery and compare with their concentrations in major Indian urban centers.     

Suitability assessment of groundwater for drinking, irrigation and industrial use in some North Indian villages

The study comprised suitability assessment of groundwater for drinking, irrigation, and industrial use. A total of 34 groundwater samples were collected from Rewari town and its perimeter from the land chiefly used for agriculture. Physico-chemical characterization of the samples revealed that groundwater from most of the sources was not fit for drinking owing to a high concentration of calcium, magnesium, hardness and fluoride. Suitability for irrigation, too, was low since most of the sources had high value of sodium adsorption ratio (SAR), residual sodium carbonate (RSC), soluble sodium percentage (SSP) and magnesium hazard which can render salinity and alkali hazard to soils on long term use in irrigation. No source of water was found to be suitable for industrial application since it had high concentration of calcium carbonate which can precipitate very easily. It was observed that sodium, sulphate, and chloride were the chief ions present in water and based on the abundance of ions and their correlation type, most of the groundwater samples are of sodium sulphate and/or sodium chloride type. The high concentration of the chemical constituents is attributed to the lithologic composition of the area. It was observed that the water of deep meteoric percolation type was of sodium sulphate type and the shallow of sodium chloride type.     

Biophysical and socioeconomic characterization of a water-stressed area and simulating agri-production estimates and land use planning under normal and extreme climatic events: a case study

This study aims in linking the biophysical and socioeconomic data base layers with the technical coefficients or simulation models for agri-production estimates and land use planning under normal and extreme climatic events, and exploring the resource and inputs management options in village Shikohpur, Gurgaon district located in the northwest part of India. The socioeconomic profile of Shikohpur is highly skewed with mostly small and marginal farmers. Though the areas under wheat in Shikohpur are increasing, the productivity is declining or remaining stagnant over the years. Most of the area during kharif season (June-September) remains fallow. Pearl millet based cropping systems (pearl millet-mustard and pearl millet-wheat) are predominant. Soils are mostly loamy sand to sandy loam with average of 70-80% sand content. Organic C content in soil is less than 0.3%, due to high prevailing temperature with little rainfall and also intensive agriculture followed in this region. Though the annual average seasonal rainfall in Gurgaon did not have much variation over the years, occurrence of extreme climate events has increased in the last two decades. The crop intensity is low and the water table is declining. Water and nitrogen production functions were developed for the important crops of the region, for their subsequent use in scheduling of the inputs. InfoCrop, WTGROWS and technical coefficients were used for crop planning and resource management under climate change and its variability, extreme events, limited resource availability and crop intensification. These will help in disseminating necessary agro-advisories to the farmers so that they will be able to manipulate the inputs and agronomic management practices for sustained agricultural production under normal as well as extreme climatic conditions.     

Environmental impact of coal washery and Damodar River water on the morphometry and biochemical changes of maize (Zea mays L.) and soil health

Enormous quantity of water is used for coal beneficiation and accordingly huge amount of effluents are being generated. In this study an attempt was made to evaluate the potential of this effluent water for irrigation. Water samples were collected from three different points (a) feeding point, (b) thickening point, and (c) outlet point of coal washery, and from Damodar River for monitoring the water quality. The samples were analyzed for various parameters and compared with prescribed standard, which revealed that the total suspended solids of thickening point and Damodar River were higher. A pot experiment with maize was conducted to study the suitability of this coal washery water for irrigation. Pots were irrigated with water from the three points of washery and Damodar River in two concentrations (100% and 50% dilution with distilled water); pure distilled water was used for control. There was 100% germination in all the treatments. The plant growth, chlorophyll content and soil quality parameters were significantly better in washery and Damodar River water treated pots. The Damodar River water and washery water from feeding and outlet point could be successfully used for irrigation. In general mixing with good quality water has shown better results.