DENSITY CURRENT INTRUSIONS IN AN ICE-COVERED URBAN LAKE1

ABSTRACT: Evidence is presented that snowmelt runoff from an urban watershed can produce density current intrusions (underflows) in a lake. Several episodes of density current intrusions are documented. Water temperatures and salinities measured near the bottom of a 10 m deep Minneapolis lake during the late winter warming periods in 1989, 1990, 1991, and 1995 show significant rapid changes which are correlated with observed higher air temperatures and snowmelt runoff. The snowmelt runoff entering this particular lake (Ryan Lake) has increased electrical conductivity, salinity, and density. The source of the salinity is the salt spread on urban streets in the winter. Heating of littoral waters in spring may also contribute to the occurrence of the sinking flows, but is clearly not the only cause.     

Employers′ knowledge of the hazard communication standard requirements and the perceived barriers to compliance

This study examined employers′ perceived knowledge of the Hazard Communication Standard (HCS) requirements prior to the inspection in which they were cited for an HCS violation. A lack of staff available to implement the HCS program was identified as having a significant impact upon compliance (p < 01). The perceived difficulty with compliance was also examined by the violations received by the organization. Those organizations cited for failing to have a written program identified a lack of staff available to implement the HCS requirements as having a greater impact upon compliance than those not cited for written program violations (p < 05). Suggested methods for improving the overall compliance with the HCS may include using the many compliance resources available through insurance companies, safety organizations, and state programs. Areas for further research include identifying the availability, use, and effectiveness of the outside safety and health compliance resources.     

Incidents in manual handling activities

More than 20000 handling manoeuvres in loading or unloading trailers in a large transportation company were observed. The aim of the study was to determine the frequency and nature of the incidents occurring whilst handling. The incidents were recorded and interpreted from a double perspective, namely as risk factors and as activity regulation factors. The study showed that on average, one incident occurred in every seven handling manoeuvres: 71% of them were related to the environment, and 29% to the activity. While numerous, the environment-related incidents were generally without consequences. In this respect, the activity incidents appeared more risky; also, the majority of these incidents occurred during the load positioning phase. The study also showed that loads are re-handled twice as often in unloading as in loading, the frequency of re-handlings varying widely from one handler to another. The reasons why so few of the observed incidents are reported in accident studies and their significance in the understanding of handling problems are discussed.     

Analysis of a system for remote, dry removal of solidified mixed waste

This paper describes a novel technology for the removal of solidified radioactive waste from underground storage tanks at the DOE Hanford site in southeast Washington. The process involves the use of a unique high pressure system which pulverizes the hardened saltcake with stainless steel pellets to a powder for easy vacuum removal. The steel pellets can be magnetically separated from the waste material for re-use. Specifically this study analyzes the effects of various steel abrasives, pressure of the air stream, and stand-off distance on removal rates and penetration depth on simulated saltcake samples using the high pressure technique. A full-scale test set-up and protocol were implemented to allow for comprehensive testing. To insure reproducibility of the method, tests were then run for the optimum removal parameters. A time-dependent test was also conducted to determine the relationship of removal rates to length of pressure blasts. The results of these tests revealed that stand-off distance and pressure could be positively correlated to removal volumes. Additionally, a statistical analysis confirmed that nozzle angle is independent of removal rate. This study demonstrated that the pellet ‘blaster’ technique is a safe, effective method for removal of radioactive wastes without any increase in either waste mass or volume.     

Evaluation of the california environmental quality act

The California Environmental Quality Act (CEQA) has evolved from a mini-NEPA, first enacted in 1970, into a procedural act that affects the approval process of all large developments in California. In 1990, California local governments produced over 1600 environmental impact reports and 30,000 initial studies under CEQA. Because of its widespread use, CEQA has periodically drawn the attention of the state legislature, most recently in 1993, when over 60 CEQA reform bills were introduced. This paper describes the CEQA process and evaluates its success at meeting its explicit and implicit goals. The research includes a statewide survey of CEQA practice, sent to the planning departments of all 513 local governments in California in 1991. Survey respondents agreed that CEQA helps in evaluating environmental impacts, reducing impacts, informing the public, and coordinating public agency review. It is effective in reducing the environmental impacts of individual projects, but is not as effective in improving environmental quality on an areawide scale. This research concludes that CEQA has led to positive outcomes and is not as deeply flawed as many of its critics claim. Still, CEQA as currently designed may not be the optimal vehicle for ensuring environmental quality.     

Review of information on pesticide residues in the Canadian environment

Summary Pesticide residues in soil, water, food, wildlife and other media have been analysed in several monitoring studies. The purpose was to establish the distribution of these residues across a defined area, ascertain their trend over a specific period and use the results to assess environmental compliance and safety. In the present review the availability of information on pesticide residues in various Canadian environmental components was sought. With the possible exception of localized pesticide contamination of some private water supply wells, ground and surface water, most analyses revealed concentrations below guideline limits. Only a few cases were reported of mishandling, misuse and poisoning from pesticides. Continuing surveillance programmes and in-depth and well-organized monitoring studies, with special focus on areas that are vulnerable to contamination, by both provincial and federal governments, are largely responsible for the encouraging results. This experience in the control of pesticide use and monitoring of residues in the environment should be of particular interest in developing countries.Dr A.Y. Sangodoyin is a senior lecturer in the Department of Agricultural Engineering at the University of Ibadan. He was recently involved in a study visit to the University of Alberta, Edmonton, Alberta, Canada T6G 2G7, where his co-author Dr D.W. Smith is a member of staff in the Department of Civil-Engineering.