北京市二个主要工业区汞污染及其来源的初步研究

为了调查北京市汞污染状况及其来源，选择二个主要工业区石景山区和朝阳区为研究对象．共采集表层土壤２６个，剖面样品４个，对照土壤样品４个，并且在冬季采集降雪样品和枯叶样品，分析汞含量．结果表明，燃煤烟尘排放的汞是北京市汞的主要来源，汽车尾气和化工厂泄漏可使局部汞含量增高，表层土壤中汞含量为００７—２７５ｍｇ／ｋｇ．土壤剖面中的汞含量在０—１００ｃｍ土层中均较高，其含量与土壤有机质和碳酸盐含量正相关．降雪中汞在０７—３７ｍｇ／Ｌ之间，明显高于背景值，其中大部分吸附在颗粒物上．枯叶中汞主要是从土壤吸收，并且有可能被雨水淋溶出来．     

深凹露天矿流场与污染物散布的模拟研究

利用高阶矩湍流闭合方案建立了一个三维非静力高分辨率ＰＢＬ数值模式，并用此模式模拟了中性层结条件下一个深凹露天矿区实际地形的流场结构与湍流特性，分析并揭示露天矿自然通风特性，为进一步研究露天矿污染扩散规律提供背景流场。数值模拟的一些结果与同样试验条件下的风洞试验结果吻合甚好。     

AMS方法在大气气溶胶来源研究中的应用

在我国自己建立的加速器质谱计（ＡＭＳ）技术的基础上,利用＾１４Ｃ的特征的生物来源示踪性能,将ＡＭＳ技术运用于我国大气气溶胶来源的研究,我们建立了大气气溶胶采样－－石墨碳制备－ＡＭＳ测定的全部样品处理过程,对北京市中关村地区、东单地区在采暖期和非采暖期的气溶胶样品和湖南南岳、山东青岛的气溶胶及这些地区的地表土进行了ＡＭＳ测定,将多元统计方法与ＡＭＳ方法相结合,从中分析这些样品中微量元素组分和含碳 分     

柴油机排放碳颗粒物的催化燃烧

在热天平装置上考察了柴油机和碳颗粒物燃烧催化剂的活性，讨论了样品制备因素对样品失重的影响，这些因素包括碳颗粒物组成、催化剂栽体、催化剂与碳颗粒物质量比，着重筛选了催化剂的组份，得到了组份催化剂ＣｕＣｌ２－ＫＣｏ－ＮＨ４ＶＯ３其５５０℃焙烧后能使样品的Ｔｍ和Ｔｆ值都降低１８０℃以上，并对催化剂的热稳定性进行了研究。     

重金属在牡蛎(Crassostrea virginica)中的生物积累及其影响因素的研究

牡蛎软体，贝壳和沉积物中Ｃｄ、Ｃｒ、Ｃｕ、Ｆｅ、Ｍｎ、Ｐｂ和Ｚｎ等重金属元素被同步分析研究，研究结果表明，重金属在牡蛎中的生物积累是牡自身的新陈代谢、重金属元素的地球化学性质和环境诸因素综合影响的结果，其中牡蛎斩生理作用对重金属在软体中的积累产生的影响尤为重要，而贝壳中重金属的积累对来自环境的影响更为敏感。     

沼泽红假单胞菌H3对酸性红B2GL染料的厌氧脱色和降解作用

从印染厂污泥中分离到一株沼泽红假单胞菌（ＲｈｏｄｏｐｓｅｕｄｏｍｏｎａｓｐａｌｕｓｔｒｉｓＨ３），在光照厌氧条件下该菌生长细胞可将１００ｍｇ／Ｌ酸性红Ｂ２ＧＬ染料去除到３０ｍｇ／Ｌ．完整细胞脱色的最适条件为ｐＨ７０，温度３０℃，细胞浓度２０—２５ｍｇ／ｍＬ（湿重）．低浓度的阳离子对脱色影响不大．在通Ａｒ气使严格厌氧和加有还原性辅酶Ｉ的条件下无细胞提取液的脱色活性最高，比活率为１５４×１０－２ｍｇ／（ｍｇ·ｈ）．根据降解产物的分析，推断了该菌对酸性红染料的降解代谢途径．     

煤中部分潜在毒害微量元素在表生条件下的化学活动性

利用连续化学浸取实验方法，对采自贵州省二叠经龙潭组的３２个煤样中的１０种潜在毒害微量元素化学的活动性进行了研究，结果表明：煤中Ｈｇ、Ａｓ、Ｓｅ、Ｃｄ等元素具有极强的化学活动性，其中平均８３．８％的Ｈｇ、９３．５％的Ａｓ、８０．３％的Ｓｅ．６３．３％的Ｃ在．１％的Ｃｕ的８６．８％的Ｐｂ可以被带出煤中而进入表生环境；煤中Ｚｎ的化学活动性次之，只有平均４６．６％的Ｚｎ可能迁移进行环境中；Ｔｌ、Ｃｒ、Ｎｉ     

Groundwater pollution due to discharge of tannery effluents in Upper Palar basin, Tamilnadu, India: an assessment through mass transport modeling

The groundwater regime in Upper Palar basin, Tamilnadu has been highly contaminated in several locations due to discharge of effluents from a large number of tanneries. At some places total dissolved solids (TDS) concentration in groundwater was found as high as 8000 mg/l. Transmissivity and storativity of the regional aquifer were estimated at a few locations. The porosity and dispersivity values were not determined in the field. These parameters were assumed based on data available for similar geological formations elsewhere. The aquifer conceptualization thus arrived at formed the basis of a numerical groundwater flow model which was constructed using the finite difference method. The flow model was calibrated for steady state and then for transient condition for the period of 1984-92. The computed heads and calibrated parameters of the flow model were used to compute groundwater velocities. The migration of contaminants for a 20 year period was computed using the hydraulic heads and effective porosity value in a pathline model using FLOWPATH software. Mass transport model was constructed using Method of Characteristics (MOC) computer code in a separate model. The seepage rate of effluent is assumed at a rate of 30% of that discharged on the surface. The mass concentration of solute in the effluent reaching the water table was assumed as 40%, the same as in the surface effluent. The mass transport model was calibrated for a 20 year period. Prediction of contaminant migration from different clusters in the basin was analyzed. The prediction results indicated elevated TDS concentration of more than 4000 mg/l from most clusters. Also the area of the contaminated zone is likely to double in 20 years from contaminated zone of 1992.     

三槽式切换氧化沟运行工况数学模式及应用

三槽式切换氧化沟运行工况呈周期性的变化。根据理论分析，建立了各槽活性污泥浓度变化及相互关系的数学模式，并进行了验证。同时就数字模式在周期程序设置及排泥方式选择时的应用做了说明。     

Breccias of the Adnet Formation: indicators of a Mid-Liassic tectonic event in the Northern Calcareous Alps (Salzburg/Austria)

Stratigraphy, lithology and depositional structures of Liassic red limestone-breccias of the Adnet Formation, including the 'Adnet Scheck', were studied at several outcrops of the Northern Calcareous Alps (NCA) south-east of Salzburg. A four-fold lithostratigraphic division is proposed for the Adnet Formation of the Osterhorn Mountains: the hemipelagic Schmiedwirt (Sinemurian) and Kehlbach (Carixian) members are separated from the pelagic Saubach Member (Toarcian) by a layer of amalgamated breccias (Scheck Member, probably Domerian to early Toarcian). Several other breccia beds occur locally from the base of the Kehlbach Member up to the lower Saubach Member. Although the sediments overlying the Scheck Member breccias are of coeval age, the ages of the underlying strata are very different. This can be explained by submarine Liassic erosion during a period of resedimentation from the middle Carixian until the early Toarcian. At least 10–15?m of partly lithified sediments were eroded by gravity flows. The entire Kehlbach Member and up to two-thirds of the Schmiedwirt Member were removed at Adnet. The breccias originated from submarine debris flows. Repeated flows over a long period and the depositional setting exclude a triggering by sea-level fluctuations. Most probably they arose from tectonically triggered slumps and slides of superficial sediments. The 'Scheck' was initiated on the steep upper slope of the drowned Triassic Adnet reef and flowed to the north-east.The Pliensbachian to early Toarcian period of tectonic activity indicated by the breccias was the most important during the Liassic in the Osterhorn Mountains and other parts of the NCA. From the large-scale regional distribution of the breccias and in accord with published data, a roughly north-east trending strike-slip fault zone is proposed, crossing the NCA south of the Osterhorn block, with a peaking activity during the Pliensbachian to early Toarcian as the cause of the tectonic movements.