基于GIS与栅格数据的安徽省人居环境自然适宜性测评

科学度量人居环境自然背景的适宜性,有助于合理引导人口分布与流动,促进区域人口、资源环境协调发展。运用GIS技术,以250 m×250 m栅格为基本单元,选取气候、地形、水文、地被、自然灾害等因子,构建人居环境自然适宜性评价模型,定量测评安徽省人居环境自然适宜程度,剖析各类型区的适宜性和限制性。研究表明：安徽省人居环境指数介于33.64～74.58之间,人居环境自然适宜性总体较好,绝大部分地区适宜人类居住,适宜性在空间上大体呈现南高北低的态势,与现有人口分布格局相反。一般适宜区面积最广,占安徽省总面积的46.08%;比较适宜区次之,占31.29%;高度适宜区占22.54%;临界适宜区面积最小,仅占0.08%。安徽省近61.16%的人口分布在一般适宜区,高度适宜区与比较适宜区人口所占比例不足40%,临界适宜区人口极为稀少。地形起伏度和水文指数是造成全省人居环境自然适宜性分异的主要因子,测评结果较为客观地反映了安徽省人居环境的自然本底。全省人口生存与发展的空间较大,人口流动与集聚的适宜范围较广。 关键词： 人居环境;自然适宜性;栅格;GIS;安徽省     

江西省耕地土壤氮素空间变异特征及其影响因素

为定量探讨省域尺度下土壤氮素空间变异特征及其影响因素。以江西省2012年测土配方施肥项目采集的16 582个耕地表层(0~20 cm)土壤样点数据,运用普通克里格、单因素方差分析与回归分析方法,对土壤氮素空间变异特征及其影响因素进行分析。结果表明：（1）江西省土壤全氮(TN)含量在026~375 g/kg之间,平均值为158 g/kg,变异系数为3101%;碱解氮(AN)含量值域范围为1160~39970 mg/kg,平均值为16431 mg/kg,变异系数为3460%;二者均呈中等程度的变异性。（2）经半方差分析,TN与AN的变程分别为31489和3030 km,TN的空间自相关范围大而AN较小。（3）在空间分布上,高值区主要分布在新余市、抚州市与景德镇市。（4）回归分析与单因素方差分析结果表明,地形因子、耕地利用方式、成土母质、土壤类型和秸秆还田方式对土壤氮素空间变异影响极显著(P<001)。秸秆还田方式对土壤TN与AN空间变异的独立解释能力最高,分别为271%与42%,是影响江西土壤氮素空间变异的主要因素。     

A mini review of fluoride-induced apoptotic pathways

Fluorine or fluoride can have toxic effects on bone tissue and soft tissue at high concentrations. These negative effects include but not limited to cytotoxicity, immunotoxicity, blood toxicity, and oxidative damage. Apoptosis plays an important role in fluoride-induced toxicity of kidney, liver, spleen, thymus, bursa of Fabricius, cecal tonsil, and cultured cells. Here, apoptosis activated by high level of fluoride has been systematically reviewed, focusing on three pathways: mitochondrion-mediated, endoplasmic reticulum (ER) stress-mediated, and death receptor-mediated pathways. However, very limited reports are focused on the death receptor-mediated apoptosis pathways in the fluoride-induced apoptosis. Therefore, understanding and discovery of more pathways and molecular mechanisms of fluoride-induced apoptosis may contribute to designing measures for preventing fluoride toxicity.     

Adsorptive conversion of nitrogen dioxide from etching vent gases over activated carbon

Some metal etching operations emit limited flow rates of waste gases with reddish-brown NO₂ fume, which may cause visual and acidic-odor complaints, as well as negative health effects. In this study, tests were performed by passing caustic-treated waste gases vented from Al-etching operations through columns packed either with virgin or regenerated granular activated carbon (GAC) to test their adsorptive conversion performance of NO₂ in the gases. The gases contained 5–55 ppm NO₂ and acetic and nitric acids of below 3 ppm. Exhausted carbon was regenerated by scrubbing it with caustic solution and water, and dried for further adsorption tests. Results indicate that with an (empty bed residence time (EBRT) of 0.15 sec for the gas through the GAC-packed space, around 60% of the influent NO₂ of 54 ppm could be removed, and 47% of the removed NO₂ was converted by and desorbed from the carbon as NO. GAC used in the present study could be regenerated at least twice to restore its capacity for NO₂ adsorption. Within EBRTs of 0.076–0.18 sec, the adsorptive conversion capacity was linearly varied with EBRT. In practice, with an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design.

Implications: Some metal etching operations emit waste gases with reddish-brown (yellow when diluted) NO₂ fume which may cause visual and acidic-odor complaints, as well as negative health effects. This study provides a simple process for the adsorptive conversion of NO₂ in caustic-treated waste gases vented from metal-etching operations through a GAC column. With an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design. Saturated GAC can be regenerated at least twice by simply scrubbing it with aqueous caustic solution.     

Analysis of 3-year observations of CFC-11, CFC-12 and CFC-113 from a semi-rural site in China

In-situ measurements of atmospheric chlorofluorocarbons (CFCs) can be used to the assess their global and regional emissions and to check for compliance with phase-out schedules under Montreal protocol and its amendments. The atmospheric mixing ratios of CFC-11 (CCl₃F), CFC-12 (CCl₂F₂) and CFC-113 (CCl₂F–CClF₂) have been measured by an automated in-situ GC-ECDs system at the regional Chinese Global Atmosphere Watch (GAW) station Shangdianzi (SDZ), from November 2006 to October 2009. The time series for these three principal CFCs showed large episodic events and background conditions occurred for approximately 30% (CFC-11), 52% (CFC-12) and 56% (CFC-113) of the measurements. The mean background mixing ratios for CFC-11, CFC-12 and CFC-113 were 244.8 ppt (parts per trillion, 10^?12, molar) 539.6 ppt and 76.8 ppt, respectively, for 2006–2009. The enhanced CFC mixing ratios compared to AGAGE sites such as Trinidad Head (THD), US and Mace Head (MHD), Ireland suggest regional influences even during background conditions at SDZ, which is much closer to highly-populated areas. Between 2006 and 2009 background CFCs exhibited downward trends at rates of ?2.0 ppt yr^?1 for CFC-11, ?2.5 ppt yr^?1 for CFC-12 and ?0.7 ppt yr^?1 for CFC-113. De-trended 3-year average background seasonal cycles displayed small fluctuations with peak-to-trough amplitudes of 1.0 ± 0.02 ppt (0.4%) for background CFC-11, 1.3 ± 2.1 ppt (0.3%) for CFC-12 and 0.2 ± 0.4 ppt (0.3%) for CFC-113. On the other hand, during pollution periods these CFCs showed much larger seasonal cycles of 11.2 ± 10.7 ppt (5%) for CFC-11, 7.5 ± 6.5 ppt (2%) for CFC-12 and 1.0 ± 1.2 ppt (1.2%) for CFC-113, with apparent winter minima and early summer maxima. This enhancement was attributed to prevailing wind directions from urban regions in summer and to enhanced anthropogenic sources during the warm season. In general, horizontal winds from northeast showed negative contribution to atmospheric CFCs loading, whereas South Western advection (urban sector: Beijing) had positive contributions.     

垃圾炉一次风量对炉床燃烧影响的仿真研究

针对垃圾焚烧炉床层内垃圾燃烧过程复杂性及影响垃圾燃烧效率因素多的问题,运用数值仿真方法对某垃圾焚烧炉床层垃圾燃烧进行了模拟,获得了垃圾质量流失速率、水分蒸发速率、挥发分释放速率、焦炭燃烧速率和烟气的温度;并在50~1 000 Nm3/min范围内改变一次风流量,获得了床层质量流失比值、过剩空气系数和烟气中各组分的质量百分比含量。仿真结果显示,一次风流量取值517.47~6`32.09 Nm3/min时燃烧效率较高;炉排两端区域的一次风流量在50~75 Nm3/min时,可以使垃圾床表面平均温度明显提高,而且还可以提高燃烧效率,同时减少供风总量,节约能源与动力资源。本研究对优化设计垃圾焚烧炉,提高床层内垃圾的燃烧效率有一定参考价值。     

污泥含炭吸附剂对挥发性有机废气吸附实验研究

研究了污泥含炭吸附剂对挥发性有机污染物的吸附特性。结果表明,污泥含炭吸附剂对苯系物的吸附为典型的物理吸附,其吸附甲苯等温线的类型系优惠型吸附等温线,表明具有良好的吸附能力;在吸附反应温度为20℃,气体流量为500 mL/m in(停留时间为0.424 s),甲苯浓度为2 700 mg/m3时,甲苯的饱和吸附容量为150.0 mg/g;同时,研究表明污泥含炭吸附剂对苯系物的饱和吸附容量和吸附强弱次序为二甲苯甲苯苯。结果表明污泥含炭吸附剂适合对中低浓度有机废气的吸附净化。     

酸雨对建筑材料的影响及防治研究综述

综合分析了酸雨对建筑外墙的涂料、石材、混凝土等主要建筑构件的腐蚀原理,并提出了防治措施,来预防酸雨对建筑材料的侵害。     

光/电Fenton牺牲阳极法降解有机污染物

采用Fe片为阳极和石墨为阴极,在可见光(λ450 nm)照射并外加电压条件下,以有机染料橙Ⅱ(orangeⅡ)及有机无色小分子2,4-二氯苯酚(2,4-dichlorophenol,DCP)为目标化合物,探讨了光/电Fenton牺牲阳极法降解有机污染物的最佳反应条件,结果表明,在电压=3 V,pH=3.0,H2O2浓度为5×10-5mol/L时,orangeⅡ的降解效果最好,反应10 h矿化率可达到78%,210 min内2,4-DCP降解率为91.4%。通过对光/电Fenton体系原位循环伏安参数测定及过氧化物酶催化反应吸光光度法和苯甲酸荧光分析法检测光/电Fenton降解orange II过程中H2O2和羟基自由基(.OH)的变化,表明orangeⅡ降解过程涉及.OH历程。     

溶剂热法合成SnWO_4及其可见光催化活性

采用溶剂热法合成了新型的可见光催化剂SnWO4,以甲基橙为目标污染物,考察了合成温度、合成时间和煅烧工艺对催化剂可见光催化活性的影响。实验结果表明:煅烧工艺会明显降低催化剂的光催化活性;在合成温度为180℃、合成时间为8h、未煅烧的条件下,合成的催化剂的光催化效果最好,光照90min后,对甲基橙的降解率可达99.93%。