Suppression of precipitation by dust particles originated in the Tibetan Plateau

Dust aerosols play an important role in modulating the hydrologic cycle. The Tibetan Plateau (TP) is little polluted by human activities as an ideal site to study the effect of dust aerosol on precipitation. In this study, observational data of dust storms and precipitation in the TP and its vicinities as well as CALIPSO satellite data were used to analyze the distributions and vertical structure of dust storms on the plateau. The results showed that dust storms occur with high frequency and raise dust particles into the troposphere from ground level to a height of 5–9 km to modulate the hydrologic cycle in the TP. There are significant negative correlations between dust aerosol and precipitation in the dust source regions during the period of both 40 and 200 years. It is found that the role of precipitation in suppressing dust storms could be unimportant, while dust aerosol may play an important role in suppressing precipitation in the hinterland of the TP. Our study provides a potential approach to better understand the climate changes in the TP.     

Effect of typhoon on atmospheric particulates in autumn in central Taiwan

Previous studies have suggested that the ongoing global climate change will likely increase the intensity and frequency of extreme weather, such as typhoons. Since the beginning of global warming, it has become necessary to understand the influence of typhoons on air quality. Rare data, especially particulate measurements data could be used to establish the relationship between the air pollution and typhoons. One of main limiting factors is that most of the previous chemical analyses of particulates used a relatively long sampling time, which could dilute the temporal impact of particulate characteristics and their sources. This work, depending more time-resolved measurements, focus on the characteristics and sources of high particulate matter levels and the influence of typhoons and the Pacific high system. Depending on the measurements, two pollutant groups were clearly identified in this work. The first pollutant group was the emissions from neighboring riverbeds under the strong circulation of the typhoon in the driest season and characterized as high coarse particle concentrations with high mass fraction of Ca²⁺. The second pollutant group was characterized as the formation and transport of secondary particles with prevalent ions of NH₄⁺, NO₃^?, and SO₄^2? and occurred in the sea-land breeze circulation under the influence the Pacific high system.     

DO对好氧颗粒污泥短程同步硝化反硝化脱氮的影响

以模拟城市污水为处理对象,研究了不同溶解氧下序批式活性污泥反应器（SBR）的短程同步硝化反硝化过程特征及处理效果。试验结果表明,溶解氧浓度是实现短程同步硝化反硝化的一个重要控制参数。在亚氮积累阶段,控制温度为28～32℃,pH值为7.5～7.8,当进水NH⁺₄-N为30 mg/L左右,COD为250 mg/L左右时,亚硝酸盐氮的积累率达到96%～98%。在试验阶段,常温下控制溶解氧在0.5～1.0 mg/L,可保证氨氮的去除率达到95%～97%,总氮的去除率达到82%～85%。     

复合沸石滤床修复北方景观水体的实验研究

以天然矿物质沸石、细砂及煤渣取代传统滤料构建复合基质生态床,表面种植景观植物,采用下向流-上向流运行方式修复北方景观水体。分别进行静态实验及不同循环速率下的动态实验,考察对水体污染物去除过程。结果表明,2种运行方式下对水体NH⁺₄-N去除率都在85%以上,其中以1 h为循环周期的运行方式去除率达97%,较静态提高12.8%;TN去除率最高为84%;TP去除不稳定,过程缓慢。煤渣层对NH⁺₄-N的去除效果差,硝化作用不彻底与反硝化作用的加强使下层出水NH⁺₄-N 、NO^-₂-N及NO^-₃-N浓度均高于上层。提高循环速率有利于对氮的去除。     

脂肪酰基氨基酸对矿物润滑油生物降解性的影响研究

通过生物降解试验研究了N-月桂酰基谷氨酸、N-月桂酰基甘氨酸、N-月桂酰基丙氨酸和N-油酰基甘氨酸4种脂肪酰基氨基酸对HVI 350矿物润滑油生物降解性的影响,采用高倍电子显微镜分析了生物降解过程中微生物数量和形态变化。结果表明,在矿物润滑油中添加少量脂肪酰基氨基酸后,矿物润滑油的生物降解性能明显改善,且生物降解过程中微生物数量增多、形态发生变化,这可能是脂肪酰基氨基酸增加了微生物的营养,且具有表面活性,有利于细胞的吸收,从而促进了矿物润滑油生物降解。     

铈改性Al_2O_3担载Pd催化剂的CO氧化性能研究

浸渍法制备了Al2O3+CeO2为载体的Pd催化剂,对制备中各因素对催化剂效果的影响作了初步研究.考察了活性组分含量与催化荆性能的关系以及焙烧温度、水蒸气对催化剂活性的影响.结果表明,稀土Ce元素的存在使催化剂的性能得到明显改善.制备过程中焙烧步骤对催化剂的活性影响很大,催化剂制备必须高于600 ℃焙烧.     

Analysis of the Energy Embodied in Foreign Goods Trade of China

In recent years, scientists have been increasingly interested in the energy embodied in traded goods among countries. In this article, the direct energy intensities in various economic sectors of China were calculated with the data of energy consumption and output value of each sector, and the input-output table was used to estimate the external energy consumption. The total energy intensity of all sectors was then obtained. From the data of international trade, the energy embodied in goods trade of China was estimated for the period of 1994-2001. During this period, the average energy intensity of imported goods was always higher than that of exported ones. As a country with a surplus in international goods trade, China actually imported net embodied energy in the past few years. The net embodied energy imported was at the same magnitude of the imported energy in the form of fossil fuels.     

我国旅游景区经营模式的构想

本文以旅游景区的经营模式为研究核心,从现有国内外旅游景区组织结构分析入手,构建了适合我国国情和旅游景区可持续发展要求的两种经营模式：一种是国有国营的次国家公园模式,另一种是完全企业化经营,并且提出了两种模式运作的保障条件。     

Study on Biodegradable Starch/OMMT Nanocomposites for Packaging Applications

The thermoplastic starch (TPS) and nanocomposite(TPS/OMMT) was prepared with 15% carbamide, 15% ethanolamine and different contents of organic activated montmorillonite (OMMT) by twin-screw extruder with a 130 °C barrel temperature. Fourier transforms infrared spectroscopy and wide angle X-ray diffraction shown that the alkylamine in dodecyl benzyl dimethyl ammonium bromide could react with MMT via cation exchange reaction. After treated, the d(001)space distance of MMT increased from 1.5 to 1.7 nm. Scanning electron microscope revealed that the lower contents of OMMT could disperse well in the matrixes of TPS. The carbamide, ethanolamine and the OMMT could destroy the crystallization behavior of starch, but only the OMMT restrained this behavior for long-term storing. Mechanical properties investigation indicated that the tensile strength and modulus of TPS/OMMT nanocomposites were better than those of TPS, while the elongation at break was descended with the increasing of OMMT contents. When the content of OMMT was 4%, the tensile strength and modulus of TPS was improved from 4.2 and 42 MPa to 6.0 and 76 MPa, respectively.     

Evaluation of two models of a slipmeter

The aim of the study was to compare the performances of the Brungraber Mark II (BM II) and Mark III (BM III) slipmeters. Friction measurements with the two slipmeters were conducted in a laboratory using four footwear materials, four floor types, and three surface conditions. Both the coefficient of friction (COF) values obtained with the slipmeters and the force platform-based COF values were measured. The COF measured with the BM II was slightly higher than that measured with the BM III with a R² of 0.83. A comparison of the averaged normal force between the two slipmeters showed that the BM II generated a significantly higher normal force than the BM III at a low COF and the difference of the normal force between the two slipmeters decreased when the COF value was increased. The regression analysis results in this study showed that the force platform-based COF values were closer to the COF values obtained with the BM III than with the BM II. The R² values for the regression model between the COF values obtained from the slipmeter and the force platform were 0.90 and 0.79 for the BM II and BM III, respectively.