深圳近岸海域表层沉积物中多环芳烃(PAHs)的风险评估研究

以2015年8月对深圳近岸海域沉积物中PAHs的含量调查资料为基础,采用毒性及致畸性当量和效应区间低、中值法、平均效应区间中值商法等分别进行PAHs的健康风险和生态风险评估。研究表明,深圳近岸海域沉积物中PAHs的含量（干重）范围为（227.51~3897.42）×10-9。PAHs的毒性当量和致畸性当量相对于世界范围内沉积物来说,处于较低的毒性水平和致畸风险状态。深圳湾海域大沙河口附近的表层沉积物对海洋生物可能产生中低毒性,整体生态风险处于中低水平。     

Identification of structural breaks in the forest product markets: how sensitive are to changes in the Nordic region?

Forests play a fundamental role in the global carbon cycle and can be managed to mitigate greenhouse gas emissions and conserve or sequester carbon. Global policy and environmental changes can affect regional consumption of forest products, as well as inter-regional trade of forest goods and services. This study analyzes global and regional change impacts on the production, consumption and trade of forest products in two Nordic countries, Finland and Sweden. Annual data on removal and trade (1964–2012) for roundwood and sawnwood is used to identify structural breaks based on Chow tests. According to the analysis, the time period is divided into two periods: t1 (1964–1980) and t2 (1981–2012). In the first period, breaks occurred in 1975 and 1976 in the Finnish model and no break is found in the Swedish model. In the second period, we identify breaks in 1991 and 1992 for the Finnish model and in 2004, 2005 and 2006 for the Swedish model. Although our findings have broad empirical support, we do not identify any specific incident as a direct cause of the changes in the consumption and trade patterns of the two types of wood in these countries. The models and analysis presented here can serve as methodological tools for policymakers to better understand the effects of structural changes in the production of forest goods and services in the Nordic region and globally.     

基于PLAXIS软件对燃气管道回填施工方案的安全性评估

为研究燃气管道回填施工过程中管道的受力情况,利用岩土有限元分析软件PLAXIS 3D,构建了地基-管道-回填材料-施工荷载的动力响应数值模型,设计了多种工况情景以及对应的施工机械动力荷载的数学表达形式,并对燃气管道回填施工各结构层压实过程中多种不利工况下管道的动力响应进行了数值模拟计算与分析,提出了管道安全性的评价准则并对管道的安全性进行了评估。结果表明:按照该回填施工方案,施工过程中管道的应力范围在35 MPa以内,管道压应变竖向位移小于5mm,管道处于安全范围。通过分析不同地基土体参数以及管道参数下管道的动力响应,得到了各影响因素对管道应力和位移的影响规律,可为深入了解管道在不同荷载作用下的动力响应及回填施工方案设计提供依据。     

丁腈橡胶密封圈高温老化行为——自由状态和承压状态

目的研究丁腈橡胶密封圈自由状态和承压状态下的高温老化行为。方法以拉伸强度和拉断伸长率为参数,对各温度下的老化行为进行表征和分析。结果 70℃条件下机械应力大大加快了橡胶密封件拉伸强度的下降速率,以致试验64 d时拉伸强度甚至比110℃时还低,拉断伸长率的下降速率也明显加快了;90℃加速条件下机械应力对拉伸强度的下降有一定的促进作用,但对拉断伸长率的变化基本无影响;110℃加速条件下机械应力对拉伸强度和拉断伸长率均没有明显的影响。结论机械应力在较低温度下可以显著促进丁腈橡胶密封圈热氧老化,高温条件下促进作用不明显。     

遂宁市主城区环境空气质量现状及原因分析研究

利用遂宁市2017年1月份4个国控环境空气自动监测数据,分析了遂宁市主城区环境空气质量现状,与整个成渝地区和周边城市的空气质量进行了横向比较,并阐述了遂宁市空气质量变化的原因.结果发现遂宁市主城区2017年1月份空气质量指数的范围为32～203,优良率为54.8％,首要污染物为PM2.5,空气质量同比下降了22.8％,环比下降了26.1％,但均显著优于成渝地区和周边城市的平均水平,并从4个方面阐述了空气质量下降的原因.最后,根据遂宁市大气污染现状,提出了4条针对性的防治措施.     

生物陶粒反应器的氢自养反硝化研究

利用氢自养反硝化生物陶粒反应器处理硝酸盐废水,探讨了生物陶粒反应器中氢自养反硝化生物脱氮的实现过程.考察了水力停留时间、进水硝氮负荷、进水pH值、温度、供氢量等因素对反应器脱氮效果的影响.结果表明,当水力停留时间为24 h和48 h时,反应器对硝酸氮的平均去除率分别达到94.54%和97.47%.在水力停留时间为5~16 h时,NO-3-N去除率随水力停留时间的缩短而降低;进水NO-3-N浓度较低时,NO-3-N的降解速率随其浓度的升高而增大,当NO-3-N浓度大于110mg·L-1时,氢自养反硝化反应受到抑制;中偏碱性环境较酸性或碱性环境更利于反应器对硝酸盐的去除;反应器有较宽的温度适应范围,最适温度为25~30℃;当反应器供氢不足时,脱氮效果明显降低,表明了氢自养反硝化菌对氢气利用的专一性.在整个运行阶段,出水中亚硝酸氮浓度一直保持在较低水平.     

Surface lipids of queen-laid eggs do not regulate queen production in a fission-performing ant

In animal societies, most collective and individual decision making depends on the presence of reproductive individuals. The efficient transmission of information among reproductive and non-reproductive individuals is therefore a determinant of colony organization. In social insects, the presence of a queen modulates multiple colonial activities. In many species, it negatively affects worker reproduction and the development of diploid larvae into future queens. The queen mostly signals her presence through pheromone emission, but the means by which these chemicals are distributed in the colony are still unclear. In several ant species, queen-laid eggs are the vehicle of the queen signal. The aim of this study was to investigate whether queen-laid eggs of the ant Aphaenogaster senilis possess queen-specific cuticular hydrocarbons and/or Dufour or poison gland compounds, and whether the presence of eggs inhibited larval development into queens. Our results show that the queen- and worker-laid eggs shared cuticular and Dufour hydrocarbons with the adults; however, their poison gland compounds were not similar. Queen-laid eggs had more dimethylalkanes and possessed a queen-specific mixture of cuticular hydrocarbons composed of 3,11?+?3,9?+?3,7-dimethylnonacosane, in higher proportions than did worker-laid eggs. Even though the queen-laid eggs were biochemically similar to the queen, their addition to experimentally queenless groups did not prevent the development of new queens. More studies are needed on the means by which queen ant pheromones are transmitted in the colony, and how these mechanisms correlates with life history traits.     

2株降解菲的植物内生细菌筛选及其降解特性

为了获得具有菲降解特性的植物内生细菌,通过选择性富集培养,本研究从多环芳烃污染区植物体内分离得到2株能够降解液体培养基中高浓度菲(200 mg·L-1)的植物内生细菌(菌株P1和P3).经形态观察、生理生化特征鉴定和16S rDNA序列同源性分析,分别将菌株P1和P3鉴定为寡养单胞菌属(Stenotrophomonas sp.)和假单胞菌属(Pseudomonas sp.)的细菌.菌株P1和P3均为好氧生长,28℃、150 r·min-1摇床培养7 d,2株菌对无机盐培养基中菲(100 mg·L-1)的降解率均高于90%.条件实验表明,温度20～30℃,pH 6.0～8.0,盐含量0%～4%,装液量10～30 mL(100 mL三角瓶)2菌株生长良好且对菲降解率高于70%.其最适生长和降解温度为30℃,pH为7.0,盐含量≤4%,装液量≤30 mL.综合比较2株菌对菲的降解特性,P1菌株高温耐受性稍强,而P3菌株对环境pH改变和缺氧的耐受性稍强.     

明胶厂剩余高钙污泥作为燃煤固硫剂的应用研究

明胶生产产业在废水处理工艺中产生大量剩余高钙污泥,采用该剩余污泥作为燃煤固硫剂,在高温管式电阻炉内进行燃烧实验,通过测定燃烧前和燃烧后样品中的硫含量确定该剩余污泥的固硫效果。通过单因素研究煤粉粒径、剩余污泥粒径和剩余污泥/煤样%等影响因素对固硫率的影响。在单因素试验的基础上通过正交设计法优选达到较高固硫率的实验条件。实验结果表明:影响固硫率的因素从大到小依次为燃烧温度>剩余污泥/煤样%>煤粉粒径>剩余污泥粒径。以剩余污泥作为固硫剂,固硫率最高的实验条件为:燃烧温度800℃,剩余污泥/煤样为3%,煤粉粒径60⁹0目,剩余污泥粒径9090目,剩余污泥粒径90¹20目。并且,当温度达到1150℃,煤粉粒径90120目。并且,当温度达到1150℃,煤粉粒径90¹20目,剩余污泥粒径为60120目,剩余污泥粒径为60⁹0目,污泥/煤样(质量比)为3%时,固硫率可达62.78%,说明在高温下该剩余污泥保持较高的固硫率。将明胶厂剩余污泥作为固硫剂是较为合适的再利用方法,可有效缓解当前该污泥大量堆积污染环境的状况。