Assessing contamination of smoked sprats (Sprattus sprattus) with polycyclic aromatic hydrocarbons (PAHs) and changes in its level during storage in various types of packaging

The analysis of material used in this study demonstrated that the amount of polycyclic aromatic hydrocarbons (PAHs) in smoked sprats varies from the level below the lowest detection limit in muscles up to 9.99 µg kg^?1 of benzo[a]pyrene (BaP) in fish skin. Such a high level of PAHs in skin was reported only in one of six batches of sprats, while mean BaP level was at 1.69 µg kg^?1. Regardless such a high BaP level in skin, its concentration in muscles did not exceed the maximum acceptable level. The study objective was to assess to what extent packaging materials adsorb PAH compounds from food. Changes in the PAH levels were monitored in fish during their storage in packages made of various materials. The storage time was from 0 to 168 hours. The obtained results varied considerably, therefore their scatter did not allow to confirm unequivocally the preliminary hypothesis about the reduction of PAHs due to their migration to packaging material. However, analysis of the packaging used in this study demonstrated a significant increase in the level of total 16 PAHs. When high-density polyethylene (HDPE) packaging was analysed, a six-fold increase in the total 16 PAHs was observed comparing to the blank sample.     

Photocatalytic decomposition of N<Subscript>2</Subscript>O over g-C<Subscript>3</Subscript>N<Subscript>4</Subscript>/WO<Subscript>3</Subscript> photocatalysts

Although the nitrous oxide belongs among three of the most contributing greenhouse gases to global warming, it is quite neglected by photocatalytic society. The g-C₃N₄ and WO₃ composites were therefore tested for the photocatalytic decomposition of N₂O for the first time. The pure photocatalysts were prepared by simple calcination of precursors, and the composites were prepared by mixing of suspension of pure components in water followed by calcination. The structural (X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy), textural (N₂ physisorption), and optical properties (diffuse reflectance spectroscopy, photoluminescence spectroscopy, photoelectrochemical measurements) of all composites were correlated with photocatalytic activity. The experimental results and results from characterization techniques confirmed creation of Z-scheme in the WO₃/g-C₃N₄ composites, which was confirmed by hydroxyl radicals’ trapping measurements. The photocatalytic decomposition of N₂O was carried out in the presence of UVA light (peak intensity at 365 nm) and the 1:2 WO₃/g-C₃N₄ composite was the most active one, but the photocatalytic activity was just negligibly higher than that of pure WO₃. This is caused by relatively weak interaction between WO₃ and g-C₃N₄ which was revealed from XPS.     

Two-dimensional modeling of torrefaction of a large biomass particle

A two-dimensional (2-D) model is developed to predict the torrefaction behavior of a large wet biomass particle. Although one-dimensional (1-D) model is found to be adequate for L/D ≥ 6, the necessity of using 2-D model at lower L/D ratios and higher torrefaction temperature is established. Errors up to 18% are observed in predicted mass fractions between 1-D and 2-D models. The center temperatures differed more, up to 96%, between z = 0 and z = L/2 in 2-D model which is not captured by the 1-D model. The model predictions agree well with the experimental results of the present authors and others. The evolution of the temperature profile is found to govern the mass fraction profile. At higher reactor temperature, three distinct zones are visible in the contour plots: peripheral fully torrefied zone, intermediate torrefying zone, and core with unreacted virgin biomass zone. Simulation studies show the formation of two symmetric annular hot spots at the ends, which move inward axially and subsequently merge at the center, the rate being faster for smaller L/D ratio. However, 1-D model does not provide such insight. The effects of reactor temperature, particle size, the residence time, and the initial moisture content on the torrefaction behavior are investigated.     

Removal of 4-chlorobenzoic acid from spiked hydroponic solution by willow trees (<Emphasis Type="Italic">Salix viminalis</Emphasis>)

Background  

Chlorobenzoic acids (CBA) are intermediate products of the aerobic microbial degradation of PCB and several pesticides. This study explores the feasibility of using basket willows, Salix viminalis, to remove 4-CBA from polluted sites, which also might stimulate PCB degradation.     

Spontaneous vegetation succession at different central European mining sites: a comparison across seres

We performed detrended correspondence analysis (DCA) ordination to compare seven successional seres running in stone quarries, coal mining spoil heaps, sand and gravel pits, and extracted peatlands in the Czech Republic in central Europe. In total, we obtained 1,187 vegetation samples containing 705 species. These represent various successional stages aged from 1 to 100 years. The successional seres studied were more similar in their species composition in the initial stages, in which synathropic species prevailed, than in later successional stages. This vegetation differentiation was determined especially by local moisture conditions. In most cases, succession led to a woodland, which usually established after approximately 20 years. In very dry or wet places, by contrast, where woody species were limited, often highly valuable, open vegetation developed. Except in the peatlands, the total number of species and the number of target species increased during succession. Participation of invasive aliens was mostly unimportant. Spontaneous vegetation succession generally appears to be an ecologically suitable and cheap way of ecosystem restoration of heavily disturbed sites. It should, therefore, be preferred over technical reclamation.     

The effect of landscape type and landscape elements on public visual preferences: ways to use knowledge in the context of landscape planning

This study deals with an assessment of the visual quality of landscapes, and specifically with the perception of selected elements in the landscape. The aim of the study was to find out how particular elements are perceived in various landscape types, whether this perception is affected by the landscape type in which the elements are placed, and to what extent the respondents’ characteristics affect the assessment. The study was carried out with a sample of respondents of various ages, educational levels and types of employment. The respondents came from Slovakia and the Czech Republic. The preferences of the respondents were determined using an online questionnaire, in which they rated landscape photographs on a 21 point rating scale with a range from ?10 to +10 points. Using generalised linear mixed effect models, it was found that the perception of an element is most affected by the landscape type, since the same element was assessed differently according to the landscape in which it was situated. The results confirmed that selected elements which do not disturb the harmony of the landscape are generally positively perceived, and the selected elements of a technical character are generally negatively perceived. Among the characteristics of the respondents, only gender and the respondent's current place of residence have an effect on their visual preferences.     

Prenatal diagnosis of exophytic nevus sebaceous of the scalp

Nevus sebaceous is a complex hamartoma most commonly found on the scalp, face, and neck and is often present at birth, although some may be diagnosed later in infancy. We report the first prenatal diagnosis of isolated nevus sebaceous that presented at 19 weeks' gestation as a large and exophytic tumor of the scalp. This case emphasizes the crucial role of ultrasound examination performed with high-frequency probes, which revealed associated diffuse lesions of the face. Identification of such a facial involvement could have a dramatic prognostic impact. © 2013 John Wiley & Sons, Ltd.     

The concentration of Cu and Pb in the funnel spider Eratigena atrica (C. L. Koch 1843) (Araneae: Agelenidae) and its web

Studies on the heavy metal concentrations on spider webs in relation to the pathways of pollution penetration (external and internal) have yet to be performed. This work assesses the concentration levels of two heavy metals: essential copper (Cu) and toxic lead (Pb) in spider webs and spiders (females, males and juveniles). Spiders divided into three treatment groups were exposed to the heavy metals in their diet as prey (fruit flies and mealworms larvae) were artificially contaminated with Cu and Pb. In general, we found higher rates of Cu compared to Pb concentrations in spiders and their webs. A positive correlation between levels of Cu and Pb in webs and spiders was found. Males had higher concentrations of both metals Cu and Pb in their bodies and webs compared to females. In an additional experiment, washed webs had significantly less metals than unwashed suggesting the dominance of external pollution in the contamination pathway.     

Photocatalytic decomposition of methanol over La/TiO<Subscript>2</Subscript> materials

Lanthanum-modified TiO₂ photocatalysts (0.2–1.5 wt% La) were investigated in the methanol decomposition in an aqueous solution. The photocatalysts were prepared by the common sol-gel method followed by calcination. The structural (X-ray diffraction, Raman, X-ray photoelectron spectroscopy), textural (N₂ physisorption), and optical properties (diffuse reflectance spectroscopy, photoelectrochemical measurements) of all synthetized nanomaterials were correlated with photocatalytic activity. Both pure TiO₂ and La-doped TiO₂ photocatalysts proved higher yields of hydrogen in comparison to photolysis. The photocatalyst with optimal amount of lanthanum (0.2 wt% La) showed almost two times higher amount of hydrogen produced at the same time as in the presence of pure TiO₂. The photocatalytic activity increased with both increasing photocurrent response and decreasing amount of lattice and surface O species. It has been shown that both direct and indirect mechanisms of methanol photocatalytic oxidation participate in the production of hydrogen. Both direct and indirect mechanisms take part in the formation of hydrogen.     

Influence of physical factors on polycyclic aromatic hydrocarbons (PAHs) content in vegetable oils

The aim of this study was to test the hypothesis about physical factors causing a significant decrease of polycyclic aromatic hydrocarbon (PAH) compounds in foodstuffs. For this purpose, extraction of 16 PAHs (prioritised by EPA) from selected foodstuffs (rapeseed oil and sunflower oil) was carried out. The changes in PAH content in oils exposed to selected physical factors (UV radiation, temperature and time) were observed. Oils under study were exposed to two types of UV radiation: direct and indirect (through a glass plate). In both experiments, a reduction of 16 PAHs in oils was recorded but in the latter a PAH reduction was not as high. In another experiment, the temperature of oils was raised to 40, 100 and 200°C. As a result, the content of PAHs has decreased significantly. In both cases, exposure to UV radiation and high temperature resulted in the reduction of PAHs, it was strongly correlated with the duration of experiments. The results showed relatively low contamination of oil with PAHs. Only for rapeseed oil, the level of said contamination was substantially higher than laid down limits.