Utilisation of steel slags as neutralising agents in biooxidation of a refractory gold concentrate and their influence on the subsequent cyanidation

A study on the possibilities to utilise steel slag as neutralising agent in biooxidation of a refractory gold concentrate has been done with reference to commercial grade slaked lime. The idea has been to reduce the operating costs for neutralisation in the biooxidation plant, which is known to be the second largest operating cost. Other benefits would be savings in cost for landfilling of slag, possibilities to recycle elements present in the slag and savings of virgin limestone deposits. The slags used were an EAF slag and a slag from ladle refining; both originating from Swedish scrap based steel-making. Continuous biooxidation of the refractory gold concentrate was conducted in a single-stage 5 L reactor at a retention time of 56 h. The neutralisation capacity was determined by comparing the amount needed, per ton of feed concentrate added, to maintain the desired pH of 1.5 during steady state operation. Slaked lime had the highest neutralisation capacity with 110 kg/ton feed followed by ladle slag and EAF slag with values of 152 and 267 kg/ton feed, respectively. Sulphide mineral oxidation was similar and high in all cases although the ladle slag results were slightly better. Gold recoveries after cyanide leaching on the residues obtained were also similar and were in the range of 86-89%. However, the cyanide consumption expressed as kilogram cyanide per ton of concentrate fed to biooxidation, was double in the case of ladle slag and three times as much for the EAF slag compared to the slaked lime experiment. The increased cyanide consumption could not be explained only by the increased amount of elemental sulphur obtained in the slag experiments. The elemental sulphur formed had different reactivities as seen from the thiocyanate formation and cyanide losses due to thiocyanate formation were 16%, 32% and 40% for EAF slag, slaked lime and ladle slag, respectively. It is concluded that the ladle slag could be a possible replacement for limestone if they are mixed in proper proportions so that the microbial carbon dioxide demand is met whereas the EAF slag is less suitable due to the very fine reaction products obtained which gave operational problems with filtration and washing. To come further, experiments with the normal multi-stage biooxidation set-up with total retention time of 120 h should be performed which would increase the sulphur oxidation and eventually also reduce the cyanide consumption.     

Use of EST database markers from M. truncatula in the transferability to other forage legumes

In general tropical forage legumes lack microsatellites or simple sequence repeat (SSR) markers. Development of genic SSR markers from expressed sequence tagged (EST) database is an alternate and efficient approach to generate the standard DNA markers for genome analysis of such crop species. In the present paper a total of 816 EST-SSRs containing perfect repeats of mono (33.5%), di (14.7%), tri (39.3%), tetra (2.7%), penta (0.7%) and hexa (0.4%) nucleotides were identified from 1,87,763 ESTs of Medicago truncatula. Along with, 70 (8.5%) SSRs of a compound type were also observed. Seven primer pairs of tri repeats were tested for cross transferability in 19 accessions of forage legumes comprising 11 genera. At two different annealing temperatures (55 and 60 degreesC) all primer pairs except AJ410087 reacted with many accessions of forage legumes. Atotal of 51 alleles were detected with six M. truncatula EST-SSRs primer-pairs against DNAfrom 19 accessions representing 11 genera where number of alleles ranged from 2 to 13. The cross-transferability of these EST-SSRs was 40.6% at 55 degreesC and 32.3% at 60 degreesC annealing temperature. 24 alleles of the total 50 (48%) at 55 degreesC and 27 of 51 (53%) at 60 degreesC were polymorphic among the accessions. These 27 polymorphic amplicons identified could be used as DNA markers. This study demonstrates the developed SSR markers from M. truncatula ESTs as a valuable genetic markers and also proposes the possibility of transferring these markers between species of different genera of the legumes of forage importance. It was evident from the results obtained with a set of Desmanthus virgatus accessions where SequentialAgglomerative Hierarchical and Nested (SAHN) cluster analysis based on Dice similarity and Unweighted Pair Group Method with Arithmetic mean Algorithm (UPGMA) revealed significant variability (24 to 74%) among the accessions. High bootstrap values (>30) supported the nodes generated by dendrogram analysis of accessions.     

Integrated techniques to identify groundwater vulnerability to pollution in a highly industrialized terrain, Tamilnadu, India

Investigation has been made to identify groundwater vulnerability to pollution by using geoelectric and hydrochemical investigations in an important industrial town Mettur located in Tamilnadu state of India. Schlumberger vertical electric soundings were carried out in 23 locations and groundwater samples collected from bore wells in the same locations. The resistivity value with <20 Ωm up to a depth of 36 m indicate contamination of groundwater in areas influenced by sewages from industries, domestic and agricultural practices in the central and southern part of the study area. The calculated specific conductance was noted higher than EC in central and southern part of the study area with low resistivity indicating the contaminated nature of groundwater. Concentrations of Ca, Na, Mg and K along with Cl, HCO(3), SO(4) and NO(3) were higher in certain locations when compared with WHO and ISI standards. The facies concept demarcated four groups based on the nature of groundwater contamination. The trace elements Fe and Pb were higher in locations confined to industrial zones and Zn and Cu were within the prescribed limit in all the samples.     

Physicochemical characteristics of paper industry effluents��a case study of South India Paper Mill (SIPM)

Pulp and paper mills generate varieties of pollutants depending upon type of the pulping process being used. This paper presents the characteristics of wastewater from South India Paper Mill, Karnataka, India which is using recycled waste paper as a raw material. The raw wastewater consists of 80?C90 mg L^???1 suspended solid and 1,010?C1,015 mg L^???1 dissolved solid. However, pH varied from 5.5?C6.8. The biochemical oxygen demand and chemical oxygen demand ranged from 200?C210 and 1,120?C1,160 mg L^???1, respectively. Aerobic treatment of raw effluent attribute to significant reduction in suspended solid (range between 25 to 30 mg L^???1) and total dissolved solid (range between 360 to 390 mg L^???1). However, pH, temperature, and electrical conductivity were found superior after treatment. Copper, cadmium, iron, lead, nickel, and zinc were found in less quantity in raw effluent and were almost completely removed after treatment. The dendrogram of the effluent quality parameters clearly indicate that South India Paper Mill does not meet Minimal National Standard set by central Pollution Control Board to discharge in agricultural field.     

Competition between the Rotifers Brachionus patulusand Euchlanis dilatata:Effect of Algal Food Level and Relative Initial Densities of Competing Species

We tested the effect of different algal (Chlorella vulgaris) levels and inoculation densities on the outcome of competition between the rotifers Euchlanis dilatata and Brachionus patulus. The experiment was performed in 36 transparent jars, each with 20 ml of a test medium. We used three Chlorella levels: 0.75 × 10⁶, 1.5 × 10⁶, and 3.0 × 10⁶ cells/ml. For each algal level, we used five different ratios of initial inoculation density. The population growth experiments were terminated after 19 days. Regardless of inoculation densities, an increase in food level resulted in an increased population abundance of both rotifer species. Regardless of food concentration,E. dilatatawas able to outcompete B. patulus at all inoculation densities when grown together. However, when Chlorella was offered in low concentration and there was a higher ratio of Brachionus to Euchlanis at the onset of the experiment, both rotifer species coexisted in more or less equal densities until the end of the experiments. When the food level was enhanced, E. dilatata totally eliminated B. patulus. The rate of population growth ranged from 0.002 to 0.578 for B. patulus and from 0.006 to 0.447 for E. dilatata. The results are discussed with respect to the factors influencing the outcome of competition between species.     

Impact of COVID-19 lockdown on small-scale fishers (SSF) engaged in floodplain wetland fisheries: evidences from three states in India

Environmental Science and Pollution Research - The COVID-19 pandemic has created unprecedented human health crisis in recent global history with rippling social and economic effects. The outbreak...     

Spatio-temporal classification and prediction of land use and land cover change for the Vembanad Lake system,Kerala: a machine learning approach

Environmental Science and Pollution Research - Land use and land cover (LULC) change has become a critical issue for decision planners and conservationists due to inappropriate growth and its...     

Application of waste aluminum cans based nano alumina as reinforcing filler in natural rubber composites

Journal of Material Cycles and Waste Management - The application of waste materials based fillers is unique way to achieve rubber composites, which reduces the amount of waste in the environment...     

Recent Advancement of Biopolymers and Their Potential Biomedical Applications

Journal of Polymers and the Environment - Recently, the advantages of biopolymers over conventional plastic polymers are unprecedented, provided that they are used in situations in which they raise...     

Solid phase extraction of trace metals from environmental samples using Amberlite XAD-7 loaded with 2-hydroxy-propiophenone-4-phenyl-3-thiosemicarbazone and determination by inductively coupled plasma–atomic emission spectrometry

A method for the solid phase extraction of trace metals, namely Co, Cu, Pb, Ni and Zn, from environmental and biological samples using column Amberlite XAD-7 loaded with 2-hydroxy-propiophenone-4-phenyl-3-thiosemicarbazone (HPPPTSC) and determination by inductively coupled spectrometry (ICP–AES) has been developed. The reagent has the capacity to form chelate complexes with the metals because of three binding sites in the reagent molecule. The optimum experimental conditions for the quantitative sorption of five metals, pH, effect of flow rate, concentration of eluent, sorption capacity and the effect of diverse ions on the preconcentration of analytes have been investigated. The sorption capacity of the resin has 83, 127, 35, 88 and 85?µmol?g^?1 for Co²⁺, Cu²⁺, Pb²⁺, Ni²⁺ and Zn²⁺, respectively. The preconcentration factors for Co²⁺, Cu²⁺, Pb²⁺, Ni²⁺ and Zn²⁺ were 100, 110, 120, 140 and 150, respectively. The accuracy of the proposed procedure was evaluated by standard reference materials. The achieved results were in good agreement with certified values. The proposed method was applied for the determination of trace metals in river water and plant leaves.