Risk of serious injury of occupants involved in frontal crashes of cab-over-type trucks

Objectives: Truck vehicles (TVs) have a different structure and stiffness than non-TVs and are used commercially for transporting goods. This study aimed to analyze whether truck occupants have a greater risk of serious injury than those of other types of vehicles.

Methods: Crash data were obtained from the Korean In-Depth Data Analysis Study (KIDAS) for calendar years 2011–2016. Vehicles involved in frontal crash were included and classified into TVs and non-TVs (passenger cars and sports utility vehicles). We compared the demographic characteristics and serious injuries by body region between the 2 groups and analyzed factors that contributed to the serious injury severity from frontal crashes.

Results: The analysis was based on 884 occupants; 177 (20.0%) were in TVs and 707 (80.0%) were in non-TVs. Non-TVs had more frontal airbags deployments than TVs (50.9% vs. 3.4%, P <.01). TV occupants were 4.8 times more likely to have a serious lower extremity (LE) injury (adjusted odds ratio [AOR] = 4.820; 95% confidence interval [CI], 2.407–9.653) and 2.5 times to have a serious abdominal injury (AOR = 2.465; 95% CI, 1.108–5.487) compared to non-TV occupants.

Conclusions: Truck occupants had more serious LE and abdominal injuries than those of other types of vehicles in frontal crashes. Structural improvement and legislative efforts to develop safety systems are necessary to improve the safety of truck occupants.     

木棉纤维对水中柴油的吸附性能

用木棉纤维作为吸附材料对含油废水进行吸附研究,考察了吸附平衡时间、等温吸附、以及溶液pH、溶液盐浓度等因素对油吸附的影响。溶液pH对吸附影响很小,在不同的盐浓度下吸附略有下降,木棉纤维吸附剂对0#柴油的吸附所需平衡时间为4h,在室温和pH=7左右的条件下,吸附材料对0#柴油的最大吸附量(qm)为(31±0.81)g/g,等温吸附线符合Langmuir和Freundlich模式,研究结果表明:木棉纤维对含油废水的吸附能在较短的时间达到吸附饱和,吸附量较大,对溶液环境的适应能力强,具有很好的应用前景。     

Flowering pattern of biodiesel plant Jatropha in frost- and drought-prone regions of Botswana

Jatropha has gained interest as a potential biodiesel feedstock. Nevertheless, its oil production decreases significantly in frost- and drought-prone regions. In this study, we characterized the flowering pattern of Jatropha in Botswana in the 2014/2015 season. Extensive springtime pruning synchronized Jatropha regrowth in summer and effectively stimulated growth after frost damage. Flowering started in February 2015 and peaked in April and May. Wide variations in flowering frequency were observed among different Jatropha accessions. Trees flowering in February and March produced fruit in May, but most trees only flowered in April and May and did not yield fruit because of cold snaps. These observations suggested that harvesting seed before wintertime is the key to improve Jatropha production in the Botswana climate. This study highlighted the importance of inducing early flowering by developing new agricultural managements. These may include frost cover and sun shades to prevent stress-induced damage, canopy control by pruning, optimization of fertilization practice, and/or introduction of superior Jatropha varieties.     

Assessment of fates of estrogens in wastewater and sludge from various types of wastewater treatment plants

We measured five estrogens in the wastewater samples from the municipal wastewater treatment plants (M-WWTPs), livestock wastewater treatment plants (L-WWTPs), hospital WWTPs (H-WWTPs) and pharmaceutical manufacture WWTPs (P-WWTPs) in Korea. The L-WWTPs showed the highest total concentration (0.195-10.4 μg L⁻¹) of estrogens in the influents, followed by the M-WWTPs (0.028-1.15 μg L⁻¹), H-WWTPs (0.068-0.130 μg L⁻¹) and P-WWTPs (0.015-0.070 μg L⁻¹). Like the influents, the L-WWTPs (0.003-0.729 μg L⁻¹) and the M-WWTPs (0.001-0.299 μg L⁻¹) also showed higher total concentration of estrogens in the effluents than the H-WWTPs (0.002-0.021 μg L⁻¹) and P-WWTPs (0.011 μg L⁻¹ in one sample). The L-WWTPs (37.5-543 μg kg⁻¹, dry weight) showed higher total concentrations in sludge than the M-WWTPs (3.16-444 μg kg⁻¹, dry weight) like the wastewater. The distribution of estrogens in the WWTPs may be affected by their metabolism in the human body, their transition through biological treatment processes, and their usage for livestock growth. Unlike the concentration results, the daily loads of estrogens from the M-WWTPs were the highest, which is related to the high capacities of WWTPs.     

Characterization of polychlorinated biphenyls and brominated flame retardants in surface soils from Surabaya, Indonesia

In this study, soil contamination by PCBs, PBDEs, HBCDs and two novel BFRs such as 1,2-bis-(2,4,6-tribromopenoxy) ethane (BTBPE) and decabromodiphenyl ethane (DBDPE) in various locations such as industrial, urban, rural, dumping site and agricultural areas of Surabaya, Indonesia has been characterized in order to evaluate their contamination status, profiles, potential sources, fate and behavior. Range and median concentrations of PCBs, PBDEs, HBCDs, BTBPE and DBDPE were ND - 9.6 (1.2), 0.069 - 24 (7.4), ND - 1.8 (0.48), ND - 1.7 (0.14) and ND - 7.6 (2.2) ng g⁻¹ dw, respectively. Industrial, urban and dumping areas were inventoried as the main sources of these pollutants. Decreasing gradient levels were observed for these contaminants from industrial district, urban, dumping site, rural and agricultural areas, in that order. Furthermore, organic carbon contents and proximity to the point sources were found as the major controlling factors. Contaminant profiles were characterized by the predominance of hexa-, hepta- and penta-homologues for PCBs; deca-, nona- and octa- for PBDEs and α-isomer for HBCDs. Product mixtures such as Ar1260/KC600 and Ar1254/KC500 for PCBs, deca- and octa-BDEs for PBDEs were the possible common formulations used in study area. To our knowledge, this is a first comprehensive study on characterization of soil contamination by PCBs, PBDEs and HBCDs together with two novel BFRs in a highly industrialized city located in tropical region. This study provides baseline information for establishing national monitoring programs in Indonesia.     

Nationwide monitoring of atmospheric PCDD/Fs and dioxin-like PCBs in South Korea

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) were measured in ambient air samples collected from different parts of South Korea in 2008, and the measured levels were used for assessing the spatial and temporal distribution of atmospheric PCDDFs and DL-PCBs in South Korea. The average concentrations of atmospheric PCDD/Fs and DL-PCBs among the 37 sites were 28 fg I-TEQ m⁻³ (ND ∼ 617) and 1 fg WHO-TEQ m⁻³ (ND ∼ 0.016). Elevated atmospheric levels of PCDD/Fs and DL-PCBs observed at residential/industrial sites and in the north-west of Korea, indicated a potential contribution and impacts of anthropogenic sources of PCDD/Fs and DL-PCBs. These levels were similar or lower than those previously reported in other ambient air surveys. Average concentrations of PCDD/Fs showed small seasonal variations (ANOVA analysis, p = 0.144). The highest concentrations of PCDD/Fs were observed during winter, followed by spring, autumn and summer. Atmospheric PCDD/Fs and DL-PCBs in South Korea rapidly decreased during the last 10 years (1998-2008), demonstrating the efficiency of stricter regulations and the application of best available technologies/best environmental practices at emission sources. Comparison of the congener profiles and principal component analysis showed that current atmospheric PCDD/Fs are mostly influenced by industrial sources and PCBs from old commercial PCB uses. Nationwide POPs monitoring will continue and allows an effective evaluation of the implementation of the Stockholm Convention on POPs.     

Polarity effect of pulsed corona discharge for the oxidation of gaseous elemental mercury

The effect of polarity on the oxidation of Hg⁰ was examined in the presence of O₂ via a pulsed corona discharge (PCD). The experimental result showed no difference in the energy yield of Hg⁰ oxidation at both positive and negative PCDs (∼8 μg Hg W h⁻¹ at following conditions: total flow rate = 2 L min⁻¹ (Hg⁰ = 50 μg N m⁻³, O₂ = 10%, and N₂ balance), temperature = 150 °C, and specific energy density = 5-15 W h N m⁻³). This suggests that the positive PCD process used to control gaseous air pollutants may play an essential key role in Hg⁰ oxidation because it consumes enough energy (∼15 W h N m⁻³) but an electrical precipitator could not because it consumes less energy (∼0.3 W h N m⁻³) to oxidize Hg⁰.     

Use of reporter-gene based bacteria to quantify phenanthrene biodegradation and toxicity in soil

A phenanthrene-degrading bacterium, Sphingomonas paucimobilis EPA505 was used to construct two fluorescence-based reporter strains. Strain D harboring gfp gene was constructed to generate green fluorescence when the strain started to biodegrade phenanthrene. Strain S possessing gef gene was designed to die once phenanthrene biodegradation was initiated and thus to lose green fluorescence when visualized by a live/dead cell staining. Confocal laser scanning microscopic observation followed by image analysis demonstrates that the fluorescence intensity generated by strain D increased and the intensity by strain S decreased linearly at the phenanthrene concentration of up to 200 mg/L. Such quantitative increase and decrease of fluorescence intensity in strain D (i.e., from 1 to 11.90 ± 0.72) and strain S (from 1 to 0.40 ± 0.07) were also evident in the presence of Ottawa sand spiked with the phenanthrene up to 1000 mg/kg. The potential use of the reporter strains in quantitatively determining biodegradable or toxic phenanthrene was discussed.     

Molecular cloning and expression of novel metallothionein (MT) gene in the polychaete Perinereis nuntia exposed to metals

To report a novel metallothionein (MT) gene and evaluate its potency as a biomarker, we clone this MT gene and measured the expression levels in the metal-exposed polychaete Perinereis nuntia. Accumulated metal contents and metallothionein-like proteins (MTLPs), which have been recognized as potential biomarkers, were compared with the relative mRNA expressions of the MT gene of P. nuntia (Pn-MT). In addition, the metal-binding affinity was estimated by recombinant Pn-MT protein. Pn-MT having high cysteine residues with three metal response elements in the promoter region closely clusters with those of other invertebrates. The accumulation patterns of metals were dependent on the exposure times in lead (Pb), cadmium (Cd), and copper (Cu) exposure. Particularly, both MTLP levels and relative mRNA expressions of MT were increased with accumulated metal contents and exposure time in P. nuntia exposed to Pb and Cd. There was no significant modulation of the Pn-MT gene in polychaetes exposed to Zn and As. However, the metal-binding ability of the recombinant Pn-MT protein provides a clear evidence for a high affinity of MT to several metal elements. These results suggest that Pn-MT would play an important role in the detoxification and/or sequestration of specific metals (e.g., Pb and Cd) in P. nuntia and have potential as a molecular biomarker in the monitoring of the marine environment using a polychaete.     

Design and use of group-specific primers and probes for real-time quantitative PCR

Real-time quantitative polymerase chain reaction (qPCR) has gained popularity as a technique to detect and quantify a specific group of target microorganisms from various environmental samples including soil, water, sediments, and sludge. Although qPCR is a very useful technique for nucleic acid quantification, accurately quantifying the target microbial group strongly depends on the quality of the primer and probe used. Many aspects of conducting qPCR assays have become increasingly routine and automated; however, one of the most important aspects, designing and selecting primer and probe sets, is often a somewhat arcane process. In many cases, failed or non-specific amplification can be attributed to improperly designed primer-probe sets. This paper is intended to provide guidelines and general principles for designing group-specific primers and probes for qPCR assays. We demonstrate the effectiveness of these guidelines by reviewing the use of qPCR to study anaerobic processes and biologic nutrient removal processes. qPCR assays using group-specific primers and probes designed with this method, have been used to successfully quantify 16S ribosomal Ribonucleic Acid (16S rRNA) gene copy numbers from target methanogenic and ammonia-oxidizing bacteria in various laboratory- and full-scale biologic processes. Researchers with a good command of primer and probe design can use qPCR as a valuable tool to study biodiversity and to develop more efficient control strategies for biologic processes.