The comparison of fossil carbon fraction and greenhouse gas emissions through an analysis of exhaust gases from urban solid waste incineration facilities

In this study, in order to understand accurate calculation of greenhouse gas emissions of urban solid waste incineration facilities, which are major waste incineration facilities, and problems likely to occur at this time, emissions were calculated by classifying calculation methods into 3 types. For the comparison of calculation methods, the waste characteristics ratio, dry substance content by waste characteristics, carbon content in dry substance, and ¹²C content were analyzed; and in particular, CO₂ concentration in incineration gases and ¹²C content were analyzed together. In this study, 3 types of calculation methods were made through the assay value, and by using each calculation method, emissions of urban solid waste incineration facilities were calculated then compared. As a result of comparison, with Calculation Method A, which used the default value as presented in the IPCC guidelines, greenhouse gas emissions were calculated for the urban solid waste incineration facilities A and B at 244.43 ton CO₂/day and 322.09 ton CO₂/day, respectively. Hence, it showed a lot of difference from Calculation Methods B and C, which used the assay value of this study. It is determined that this was because the default value as presented in IPCC, as the world average value, could not reflect the characteristics of urban solid waste incineration facilities. Calculation Method B indicated 163.31 ton CO₂/day and 230.34 ton CO₂/day respectively for the urban solid waste incineration facilities A and B; also, Calculation Method C indicated 151.79 ton CO₂/day and 218.99 ton CO₂/day, respectively.

Implications: This study intends to compare greenhouse gas emissions calculated using ¹²C content default value provided by the IPCC (Intergovernmental Panel on Climate Change) with greenhouse gas emissions calculated using ¹²C content and waste assay value that can reflect the characteristics of the target urban solid waste incineration facilities. Also, the concentration and ¹²C content were calculated by directly collecting incineration gases of the target urban solid waste incineration facilities, and greenhouse gas emissions of the target urban solid waste incineration facilities through this survey were compared with greenhouse gas emissions, which used the previously calculated assay value of solid waste.     

Effects of aeration frequency on leachate quality and waste in simulated hybrid bioreactor landfills

Research has been conducted to investigate the effects of daily aeration frequency on leachate quality and waste settlement in simulated hybrid landfill bioreactors. Four laboratory-scale reactors were constructed and operated for about 10 months to simulate different bioreactor operations, including one anaerobic bioreactor and three hybrid bioreactors with different aeration frequencies (one, two, and four times per day). Chemical oxygen demand (COD) and biochemical oxygen demand (BOD₅) reduced more than 96% of the initial concentrations in all aerated bioreactors. The differences of COD and BOD₅ reductions among tested aeration frequencies were relatively small. For ammonia nitrogen, the higher aeration frequency (two or four times per day) resulted in the quicker reduction. Overall, the concentrations of heavy metals (Cr, Co, Cu, Mn, Ni, and Zn) decreased over time except Cd and Pb. The reduction of redox-sensitive metal concentrations (Mn, Co, Ni, and Cu) was greater in aerated bioreactors than in anaerobic bioreactor. Settlement of municipal solid waste (MSW) was enhanced with higher frequency of aeration events (four times per day).

Implications: In recent years, hybird bioreactor landfill technology has gained a lot of attention. Appropriate aeration rate is crucial for hybrid bioreactor operation, but few studies have been done and different results were obtained. Research was conducted to investigate the effects of daily aeration frequency on leachate quality and waste settlement. Results indicated that aeration can effectively accelerate waste stabilization and remove organic carbon concentration and total nitrogen in the leachate.     

贵州省三岔河流域水化学特征及其控制因素

对乌江源区三岔河流域枯水期和丰水期河水样品离子浓度及组成特征分析表明,河水主要的阴阳离子分别是HCO_3~–和Ca~(2+),分别占到总阴离子量的55%和总阳离子量的70%,与喀斯特地区流域相似。主要离子的时空分布的对比分析表明,Ca~(2+)、Mg~(2+)、Na~+、HCO_3~–、Cl~–枯水期浓度略高于丰水期,而K+、SO_4~(2–)、NO_3~–两期浓度变化相对较小;空间分布的多样化,反映了不同小流域在地质背景、生态环境、人为活动等方面的差异对河水离子的影响。通过Gibbs图分析表明,研究区河水水化学主要受到岩石风化的影响,通过阴阳离子三角图分析表明,研究区河水水化学主要受到碳酸岩盐的影响,并且硫酸广泛参与到岩石风化中,人为活动对流域水化学组成也有一定影响。     

Pollination ecology of <Emphasis Type="Italic">Eomecon chionantha</Emphasis> Hance (Papaveraceae), an endemic species in China

Eomecon chionantha Hance, the only species in the genus Eomecon, is an angiosperm species endemic to China. Here we investigated the pollination syndrome, pollinator generalization of E. chionantha. Our results showed that the individual flower longevity of E. chionantha was 3–5 days. The flowering phenology of E. chionantha can be divided into five phases. We found significant differences in the pollination efficiency of the different insects visiting E. chionantha with bees and flies being the most efficient pollinators. This, in addition to floral morphology and phenology, suggests that E. chionantha is generalized on bees and flies and possesses an outcrossing, partially self-compatible and pollinator-dependent breeding system.     

城市生活垃圾和污水处理厂剩余污泥混合发酵的原料配比优化研究

以城市生活垃圾和污水处理厂的剩余污泥为混合原料,研究了混合原料的不同配比对厌氧发酵过程及产气的影响。结果表明:城市生活垃圾与剩余污泥以挥发性固体(VS)质量比为2∶1混合后,厌氧发酵效果最好,累计产气量最高,达到8 721mL,发酵后的总固体(TS)、VS、COD去除率分别达43.65%、35.98%、47.88%;各实验组在发酵过程中的pH、氨氮浓度和碱度均在合理范围内,未对厌氧发酵反应造成影响;以适当配比的城市生活垃圾和剩余污泥为混合原料,进行中温联合厌氧发酵是可行的,联合厌氧发酵可以弥补单一原料的缺陷,在一定程度上改善厌氧发酵效果。     

巢湖低温高效聚磷菌的筛选及其特性

采用低温富集培养及混合平板分离技术,从巢湖底泥中分离筛选得到2株在低温下仍具有较高效能的菌株D3、D6,经过厌氧/好氧交替培养,2种菌株在低温下(8℃)的除磷率均达到80%以上。在低温下,研究了p H、微量元素对2株菌株生长及除磷率的影响,实验结果表明,2株菌都具有广泛的温度适应性,适宜其生长和除磷的p H为中性偏碱,微量元素的缺乏对2株菌株的生长和除磷效果有不同程度的不良影响。染色观察显示,厌氧培养时菌体内聚羟基丁酸(PHB)颗粒明显增多,转为好氧培养后异染颗粒增多,为典型的聚磷菌特征。经鉴定,2株菌均属假单胞菌属。     

添加炭基材料对蔬菜废物好氧堆肥进程和腐熟度的影响

以蔬菜废弃物辣椒秸秆和树叶为堆肥原料(CK),采用密闭式好氧堆肥工艺,研究了添加5%木本泥炭(T1)、5%活性炭(T2)和10%木本泥炭(T3)等炭基材料对堆肥p H、EC、CO2累积量、物料损失率、T值、C/N和发芽率指数的影响。结果显示,T2处理的p H在60 d后维持在8~9之间;EC值随着堆肥进行呈现先下降后升高再下降的趋势,最终CK、T1、T2和T3处理的EC值(m S/cm)分别降低了1.02、0.76、0.33和0.48;T2和T3处理的CO2累积量一直高于其他处理;所有处理的物料损失率均在20%以上;4个处理堆肥产品的T值分别为0.56、0.65、0.68和0.69;堆肥产品的发芽率指数分别为63.2%、69.3%、93.5%和86.1%。T值和发芽率指数显示T2和T3处理达到了腐熟阶段。结果表明,在蔬菜堆肥处理中添加炭基材料可改善堆肥产品的理化性质,加速堆肥物料的分解,有效地缩短堆肥周期和提高堆肥产品的腐熟度。     

羟基磷灰石的制备及其对水中氟离子的吸附

本研究利用红外光谱(FTIR)、扫描电镜(SEM)和X射线粉末衍射(XRD)观察了共沉淀法合成羟基磷灰石(HAP)的形貌及其晶型结构,并探讨了Ca/P摩尔比、反应时间及反应温度等因素对羟基磷灰石吸附水中氟离子性能的影响。结果表明,n(Ca/P)=1.5/1、反应时间1 h、反应温度40℃、陈化时间48 h、煅烧温度200℃、煅烧时间2 h时,HAP除氟效果最佳,吸附效率和吸附容量分别达到68.8%和6.88 mg/g。实验数据Langmuir等温模式拟合效果优于Freundlich模式,热力学参数计算可知,HAP对氟离子的吸附是自发(ΔG00),吸热(ΔH00),熵增(ΔS00)的过程。HAP对氟离子的吸附符合拟二级反应动力学过程。     

300MW燃煤锅炉机组超细颗粒聚并器的实验研究

为了解决燃煤锅炉烟气中超细颗粒难以脱除的问题,基于流体动力学原理设计了一种超细颗粒聚并器,并在300 MW燃煤锅炉机组电除尘器的前置烟道中进行了实验研究。结果表明,聚并器内部存在超细颗粒之间以及超细颗粒与大颗粒之间的相互聚集行为,从而使超细颗粒数量显著减少。例如,对于粒径在2.65和10.48μm以下的颗粒,其体积比例在聚并器出口分别减少了56.7%和62.3%,在电除尘器出口的粉尘浓度减少了26.34 mg/Nm3,这表明,基于流体动力学原理的聚并器对超细颗粒的聚并作用明显,具有良好的应用前景。