Use of agricultural waste for the removal of nitrate-nitrogen from aqueous medium

The effectiveness of wheat straw charcoal (WSC) and mustard straw charcoal (MSC) as adsorbents for the removal of nitrate-nitrogen from water has been investigated. Commercial activated carbon (CAC) was used as a standard for comparison. The adsorption effectiveness of MSC was highest followed by CAC and WSC irrespective of the concentration of nitrate-nitrogen in the range of 0-25mg/l. The effects of temperature in the range of 15-28 degrees C on adsorption by WSC and MSC have also been investigated. It was observed that the temperature dependence of the adsorption effectiveness of MSC was higher than that of WSC and CAC. It is concluded that the MSC can be used for the in situ treatment by adsorption of nitrate-nitrogen in underground and surface water.     

Validation of a QuEChERS-based gas chromatographic method for analysis of pesticide residues in Cassia angustifolia (senna)

A simple multi-residue method based on modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach was established for the determination of 17 organochlorine (OC), 15 organophosphorous (OP) and 7 synthetic pyrethroid (SP) pesticides in an economically important medicinal plant of India, Senna (Cassia angustifolia), by gas chromatography coupled to electron capture and flame thermionic detectors (GC/ECD/FTD) and confirmation of residues was done on gas chromatograph coupled with mass spectrometry (GC-MS). The developed method was validated by testing the following parameters: linearity, limit of detection (LOD), limit of quantification (LOQ), matrix effect, accuracy–precision and measurement uncertainty; the validation study clearly demonstrated the suitability of the method for its intended application. All pesticides showed good linearity in the range 0.01–1.0 μg mL^?1 for OCs and OPs and 0.05–2.5 μg mL^?1 for SPs with correlation coefficients higher than 0.98. The method gave good recoveries for most of the pesticides (70–120%) with intra-day and inter-day precision < 20% in most of the cases. The limits of detection varied from 0.003 to 0.03 mg kg^?1, and the LOQs were determined as 0.01-0.049 mg kg^?1. The expanded uncertainties were <30%, which was distinctively less than a maximum default value of ±50%. The proposed method was successfully applied to determine pesticide residues in 12 commercial market samples obtained from different locations in India.     

Removal of cyanotoxins from surface water resources using reusable molecularly imprinted polymer adsorbents

Introduction

Microcystins (MCs; cyclic heptapeptides) are produced by freshwater cyanobacteria and cause public health concern in potable water supplies. There are more than 60 types of MCs identified to date, of which MC-LR is the most common found worldwide. For MC-LR, the WHO has established a threshold value of 1???g?L^?1 for drinking water. The present MCs removal methods such as coagulation, flocculation, adsorption, and filtration showed low efficiency for removing dissolved MC fraction from surface waters to the stipulated limit prescribed by WHO based on MC health impacts. The search for cost-effective and efficient removal method is still warranted for remediation of dissolved MC-LR-contaminated water resources.

Materials and methods

Molecularly imprinted polymer (MIP) adsorbent has been prepared using non-covalent imprinting approach. Using MC-LR as a template, itaconic acid as a functional monomer, and ethylene glycol dimethacrylate as a cross-linking monomer, a MIP has been synthesized. Computer simulations were used to design effective binding sites for MC-LR binding in aqueous solutions. Batch binding adsorption assay was followed to determine binding capacity of MIP under the influence of environmental parameters such as total dissolved solids and pH.

Results and discussion

The adsorptive removal of MC-LR from lake water has been investigated using MIPs. The MIP showed excellent adsorption potential toward MC-LR in aqueous solutions with a binding capacity of 3.64???g?mg^?1 which is about 60% and 70% more than the commercially used powdered activated carbon (PAC) and resin XAD, respectively. Environmental parameters such as total organic carbon (represented as chemical oxygen demand (COD)) and total dissolved solids (TDS) showed no significant interference up to 300?mg?L^?1 for MC-LR removal from lake water samples. It was found that the binding sites on PAC and XAD have more affinity toward COD and TDS than the MC-LR. Further, the adsorption capacity of the MIP was evaluated rigorously by its repeated contact with fresh lake water, and it was found that the adsorption capacity of the MIP did not change even after seven adsorption/desorption cycles. The contaminated water of MC-LR (1.0???g?L^?1) of 3,640?L could be treated by 1?g of MIP with an estimated cost of US $1.5.

Conclusions

The adsorption capacity of the MIP is 40% more than commercially used PAC and resins and also the polymer showed reusable potential which is one of the important criteria in selection of cyanotoxins remediation methods.     

Life Cycle Assessment of Polysaccharide Materials: A Review

Apart from conventional uses of polysaccharide materials, such as food, clothing, paper packaging and construction, new polysaccharide products and materials have been developed. This paper reviews life cycle assessment (LCA) studies in order to gain insight of the environmental profiles of polysaccharide products (e.g. viscose or natural fibre polymer composites) in comparison with their conventional counterparts (e.g. cotton or petrochemical polymers). The application areas covered are textiles, engineering materials and packing. It is found that for each stage of the life cycle (production, use phase and waste management) polysaccharide-based end products show better environmental profiles than their conventional counterparts in terms of non-renewable energy use (NREU) and greenhouse gas (GHG) emissions. Cotton is an exception, with high environmental impacts that are related to the use of fertilisers, herbicides, pesticides and high water consumption. The available literature for man-made cellulose fibres shows that they allow to reduce NREU and GHG emissions in the fibre production phase. No study has been found for the fabric production and the use phase of man-made cellulose textiles.

Dissipation of flubendiamide in/on Brinjal (Solanum melongena) fruits

A field experiment was conducted at Anand Agricultural University, Anand during Sept-Dec, 2009 to study the rate of degradation of flubendiamide in/on brinjal fruits following foliar application of Fame 480 SC at 90 (standard dose) and 180 (double dose) g a.i. ha(?-1). The residues estimated using HPLC revealed persistence of flubendiamide in/on brinjal till 3rd and 7th day after the last spray at standard and double dose, respectively. The residues of flubendiamamde were reported as parent compound, and no desiodo metabolite was detected. The initial deposits of 0.17 and 0.42 μg g(?-1) in/on brinjal fruits reached below determination level of 0.05 μg g(?-1) on the 5th and 10th day at standard and double dose, respectively. The half life of flubendiamide on brinjal fruits ranged from 2.68 to 2.55 days. Soil samples analyzed on the 15th day after the last spray revealed residues at below determination level (0.05 μg g(?-1)) at either dose of application.     

Chromium speciation in a contaminated groundwater: redox processes and temporal variability

Chromium species (Cr(III), Cr(VI), and Cr(III)-organic) in groundwater of a tannery contaminated area were monitored during pre- and post-monsoon seasons for a period of 3 years (May 2004 to January 2007). The objectives of the study were (1) to investigate the temporal variation of chromium species and other matrix constituents and (2) to study the redox processes associated with the temporal variation of chromium species. Samples were collected from 15 dug wells and analyzed for chromium species and other constituents. The results showed that the groundwater was relatively more oxidizing during post-monsoon periods than the pre-monsoon periods. Except one sample, the concentration of chromium species were found in the order of Cr(VI)>Cr(III)>Cr(III)-organic complexes during all the pre- and post-monsoon periods. In most of the wells, the concentrations of Cr(III), Cr(VI), and Cr(III)-organic decreased during post-monsoon periods compared to their pre-monsoon concentrations. However, the Cr(VI)/Cr_Total ratio still increased and the Cr(III)/Cr_Total ratio decreased during post-monsoon periods in most of the samples. The possible mechanisms for the temporal variation of chromium species were (1) Fe(II) reduction of Cr(VI) vs oxidation of Fe(II) by dissolved oxygen and (2) oxidation of Cr(III) by Mn(IV).     

Removal efficiency of fluoride by novel Mg-Cr-Cl layered double hydroxide by batch process from water

The fluoride ion removal from aqueous solution using synthesized Mg-Cr-Cl layered double hydroxide has been reported.Mg-Cr-Cl was characterized by X-ray powder diffraction,Fourier-transform infrared,thermo-gravimetric analysis,differential thermal analysis,and scanning electron microscope.Adsorption experiments were carried out in batch mode as a function of adsorption dosages,contact time,pH,and initial fluoride concentration to get optimum adsorption capacity.The adsorption kinetic study showed that the adsorption process followed first order kinetics.The fluoride removal was 88.5% and 77.4% at pH 7 with an adsorbent dose of 0.6 g/100 mL solution and initial fluoride concentration of 10 mg/L and 100 mg/L,respectively.The equilibrium was established at 40 min.Adsorption experiment data were fitted well with Langmuir isotherm with R 2 = 0.9924.Thermodynamic constants were also measured and concluded that the adsorption process was spontaneous and endothermic in nature.The removal percentage decreased slowly with increasing pH.This process is suitable for industrial effluents.The regeneration of the material is not possible.     

The role of disinfectants and sanitizers during COVID-19 pandemic: advantages and deleterious effects on humans and the environment

Environmental Science and Pollution Research - Disinfectants and sanitizers are essential preventive agents against the coronavirus disease 2019 (COVID-19) pandemic; however, the pandemic crisis...     

New catalyst comprising Silicotungstic acid and MCM-22 for degradation of some organic dyes

A heterogeneous catalyst comprising Keggin type polyoxometalate, silicotungstic acid (SiW₁₂), and MCM-22 was synthesized using wet impregnation method and characterized by acidity measurement, BET, FT-IR, XRD, and SEM. Their catalytic activity was evaluated for the degradation of cationic organic dyes like methylene blue (MB), crystal violet (CV), and an azo dye Chryosidine Y (CY) in an aqueous solution. The experimental parameters such as catalyst amount, initial dye concentration, and contact time were studied for the degradation of dyes, and it was found that the cationic dyes like methylene blue and crystal violet show better activity as compared to azo dye Chryosidine Y. This may be attributed to better electrostatic interaction of these cationic dyes with the residual negative surface charge of the catalyst, due to presence of SiW₁₂ ion as it is rich in surface oxygens and surface hydroxyl groups. The control experimental results showed that the presence of SiW₁₂ at the surface of MCM-22 promoted the degradation reactions, and presence of multiple W–O bonds in polyoxometalate also played a key role in this reaction. The catalyst exhibits recycling ability without any significant loss in activity up to four cycles.

     

Berberine-loaded liquid crystalline nanoparticles inhibit non-small cell lung cancer proliferation and migration in vitro

Environmental Science and Pollution Research - Non-small cell lung cancer (NSCLC) is reported to have a high incidence rate and is one of the most prevalent types of cancer contributing towards 85%...