Distribution of iron and manganese in the Seine river estuary: approach with experimental laboratory mixing

The physico-chemical behaviour of iron and manganese has been observed during many surveys covering various hydrodynamic conditions in the Seine river estuary system. The results obtained confirm the non-conservative behaviour of these two metals. Generally, dissolved iron exhibits non-conservative removal and shows a rapid decrease in low salinity; it is moved from fresh waters with high concentrations to saline waters with very low concentrations. This can be attributed to the flocculation processes as confirmed by laboratory experiments. Dissolved manganese versus salinity curves exhibit a peak concentration in the low salinity zone. Laboratory mixing experiments have been undertaken comparing iron and manganese adsorption/desorption from suspended material versus salinity, using a series of water samples collected in the up-river and marine regions in order to assess the importance of particulate material and salinity on iron and manganese distributions. The salinity was controlled by varying the marine to fresh water ratio. The reaction kinetics aspect is developed in more detail for manganese in the last series of remobilization experiments starting from a stock of suspended particles collected in the upstream river site (Caudebec) in mixtures of waters, according to time and salinity. This study has allowed us to show that iron and manganese behaviour in the Seine estuary is strongly influenced: (i) by the high turbidity zone and by the presence of calcium carbonate which could stabilise the Mn(II) form; and (ii) by the increase of salinity, calcium, magnesium and suspended matter concentrations and by complex formation.     

Establishing the link between ammonia emission control and measurements of reduced nitrogen concentrations and deposition

In the context of international efforts to reduce the impactsof atmospheric NH₃ and NH₄ ⁺ (collectively, NH_x), it is important to establish the link between NH₃emissions and monitoring of NH_x concentrations and deposition. This is equally relevant to situations where NH₃emissions changes are certain (e.g. due to changed source sectoractivity), as to cases where NH₃ abatement technologies havebeen implemented. Correct interpretation of adequate atmosphericmeasurements is essential, since monitoring data provide the onlymeans to evaluate trends in regional NH₃ emissions.These issues have been reviewed using available measurements and modelling from nine countries. In addition to historic datasets,the analysis here considers countries where NH₃ source sector activity changed (both increases and decreases) and countries where NH₃ abatement policies have been implemented.In The Netherlands an `ammonia gap' was identified between the expected reduction and results of monitoring, and was attributedinitially to ineffectiveness of the abatement measures. The analysis here for a range of countries shows that atmospheric interactions complicate the expected changes, particularly sinceSO₂ emissions have decreased at the same time, while at manysites the few years of available data show substantial inter-annual variation. It is concluded that networks need to beestablished that speciate between NH₃ and aerosol NH₄ ⁺, in addition to providing wet deposition, and sample at sufficient sites for robust regional estimates to be established. Such measurements will be essential to monitor compliance of the international agreements on NH₃ emission abatement.     

Indoor NO2 pollution and personal exposure to NO2 in two areas with different outdoor NO2 pollution

Indoor NO₂ concentrations were measured in the kitchen, the living room and bedroom of 612 houses in two different areas in the Netherlands. In a group of housewives living in these homes, personal exposure to NO₂ was measured. NO₂ concentrations indoors were dependent on the presence or absence of (un)vented gas appliances. Personal NO₂ exposure was only different between the two areas in the group with the lowest indoor concentrations. In this study, it was determined that gas appliances inside the house are the most important factor with respect to NO₂ exposure and that outside NO₂ concentration played a secondary role, except in situations where gas appliances were absent.     

A methodology for assessing blast protection in explosive ordnance disposal bomb suits.

To reduce human casualties associated with explosive ordnance disposal, a wide range of protective wear has been designed to shield against the blast effects of improvised explosive devices and munitions. In this study, 4 commercially available bomb suits, representing a range of materials and armor masses, were evaluated against 0.227 and 0.567 kg of spherical C-4 explosives to determine the level of protection offered to the head, neck, and thorax. A Hybrid III dummy, an instrumented human surrogate [1], was tested with and without protection from the 4 commercially available bomb suits. 20 tests with the dummy torso mounted to simulate a kneeling position were performed to confirm repeatability and robustness of the dummies, as well as to evaluate the 4 suits. Correlations between injury risk assessments based on past human or animal injury model data and various parameters such as bomb suit mass, projected area, and dummy coverage area were drawn.     

Assessment of chemical process hazards in early design stages

A new method called SREST-layer-assessment method with automated software tool is presented that in a hierarchical approach reveals the degree of non-ideality of chemical processes with regard to SHE (safety, health and environment) aspects at different layers: the properties of the chemical substances involved (substance assessment layer (SAL)), possible interactions between the substances (reactivity assessment layer (RAL)), possible hazard scenarios resulting from the combination of substances and operating conditions in the various equipments involved (equipment assessment layer (EAL)), and the safety technologies that are required to run a process safely and in accordance with legal regulations (safety-technology assessment layer (STAL)). In RAL, EAL and STAL the main focus is put on process safety. A case study is used to show the principles of the method. It is demonstrated how the method can be used as a systematic tool to support chemical engineers and chemists in evaluating chemical process safety in early process development stages.     

Particle deposition,resuspension and phosphorus accumulation in small constructed wetlands

To improve understanding of phosphorus (P) retention processes in small constructed wetlands (CWs), we analysed variations in sediment deposition and accumulation in four CWs on clay soils in east-central Sweden. Sediment deposition (in traps) generally exceeded the total suspended solids (TSS) load suggesting that resuspension and wetland base erosion were important. This was confirmed by quantification of particle accumulation (on plates) (1–23 kg m^?2 year^?1), which amounted to only 13–23% of trap deposition. Spatial mean P concentrations in accumulated sediment on plates (0.09–0.15%) were generally similar to temporal mean P concentrations of particles in water (0.11–0.15%). Deposition/accumulation was minor in one wetland with high hydraulic load (400 m year^?1), suggesting that such small wetlands are not efficient as particle sinks. Economic support for CWs are given, but design and landscape position are here demonstrated to be important for effective P retention.     

Reconnecting with nature for sustainability

Calls for humanity to ‘reconnect to nature’ have grown increasingly louder from both scholars and civil society. Yet, there is relatively little coherence about what reconnecting to nature means, why it should happen and how it can be achieved. We present a conceptual framework to organise existing literature and direct future research on human–nature connections. Five types of connections to nature are identified: material, experiential, cognitive, emotional, and philosophical. These various types have been presented as causes, consequences, or treatments of social and environmental problems. From this conceptual base, we discuss how reconnecting people with nature can function as a treatment for the global environmental crisis. Adopting a social–ecological systems perspective, we draw upon the emerging concept of ‘leverage points’—places in complex systems to intervene to generate change—and explore examples of how actions to reconnect people with nature can help transform society towards sustainability.     

Geophysical investigations for evaluation of environmental pollution in a mine tailings area

Sulfide-containing mill wastes of the Komsomolsk ore processing plant situated in the Kemerovo region (Russia) were examined in 2013–2015. Multipurpose studies of the mine tailings determined the composition of waste, pore water, mine drainages, and affected groundwater. Electrical resistivity tomography was used to trace the geoelectric zoning of the waste samples. Layers with low resistivity indicated areas with pore spaces filled with highly mineralized solutions with Fe, Cu, Zn, Cd, As, and Sb at total concentrations of up to 50 g/L. Anomalous zones can be specified as ‘geochemical barriers’ – specific layers where the mobility of the elements is reduced due to pH conditions, redox potential, and Fe(III) hydroxide precipitation. The zones of increased conductivity in oxidized mine tailings indicated local areas with high acid production potential and coexisting acidic pore solution. In non-oxidized tailings, high conductivity of the mineral skeleton was observed. There was a migration of drainage outside the tailings, its direction monitored by geophysical data. Chemical analysis confirmed that the concentrations of As in groundwater samples were higher than the maximum permissible concentration.     

Field Comparison of two NO2 Passive Samplers to Assess Spatial Variation

Two-week average NO₂ concentrations were measured in Amsterdam (NL), Huddersfield (UK) and Prague (CZ) at 80 sites in each study area, to assess small area spatial variation, using a tube type and a badge type passive sampler. The badges appeared to be less robust than the tubes. The lower detection limit for tubes and badges was 3.7 and 0.91 µg/m³, respectively for fortnightly measurements. Accuracy of the samplers was determined with reference methods (chemiluminescence). The mean ratio of the concentration measured by diffusion tube over that by the reference method was 1.16, 1.03 and 0.77 in Amsterdam, Huddersfield and Prague, respectively. Standardizing the badges for the results obtained in Amsterdam, the relative mean ratio of the concentration measured by the badges over that by the reference method was 0.95 and 0.58 in Huddersfield and Prague, respectively. NO₂ concentrations measured by the two designs did not differ significantly. Mean NO₂ concentrations were 36, 26 and 22 µg/m³ in Amsterdam, Huddersfield and Prague, respectively. The precision of duplicate tubes and badges was 8% and 11%, respectively. Both samplers are suitable for determining real variation in small area NO₂ concentrations in the ranges which occurred. It is concluded that low-cost, simple NO₂ passive samplers can provide reliable information about variation in NO₂ concentrations within urban or rural areas on a small spatial scale. Based on its robustness and its precision, tubes were preferred over badges.