Integrating fast feedback and GIS to plan for important agricultural land designations in Kauai County,Hawaii

With increased affluence worldwide, planning for and preserving land for agriculture and conservation have become important goals in many communities. In Hawaii, the identification and designation of Important Agricultural Land (IAL) was first proposed at the 1978 Hawaii Constitutional Convention and approved by voters the same year. The state is required to conserve and protect agricultural lands, promote diversified agriculture, increase agricultural self-sufficiency, and assure the availability of agriculturally suitable lands. Act 183 in 2005 extended these efforts by defining IAL. The law established eight criteria to evaluate IAL and created county-led and landowner-initiated processes for designating IAL. It also specified policies for promoting agricultural production and identified landowner incentives for the designation of IAL. A central challenge facing policymakers is how to operationalize and implement these land use policies. This paper describes methods used to operationalize Act 183. We use fast feedback (i-Clicker technology) devices for capturing stakeholder preferences and geographic information systems and community mapping to visualize policy impacts and integrate community feedback. The methods developed in this paper have broad applications to jurisdictions around the world looking for data-driven approaches to planning and designating land uses according to legislative mandates or administrative requirements.     

Photochemical generation of reactive intermediates from urban-waste bio-organic substances under UV and solar irradiation

Singlet oxygen (¹O₂), hydroxyl radicals (^•OH), and excited triplet states of organic matter (³OM^*) play a key role in the degradation of pollutants in aquatic environments. The formation rates and quantum yields (Φ) of these reactive intermediates (RI) through photosensitized reactions of dissolved organic matter (DOM) have been reported in the literature for decades. Urban biowaste-derived substances (UW-BOS), a form of organic matter derived from vegetative and urban waste, have recently been shown to be efficient sensitizers in the photo-degradation of different contaminants. Nevertheless, no quantitative measurements of photo-oxidant generation by UW-BOS have been reported. In this study, the formation quantum yields of ¹O₂ and ^•OH, as well as quantum yield coefficients of TMP degradation (indicative of ³OM^* formation), were quantified for two UW-BOS samples, under 254-nm UV radiation or simulated sunlight and compared to a DOM standard from the Suwanee River (SRNOM). Values of Φ for UW-BOS samples ranged from Φ(+¹O₂) = 8.0 to 8.8 × 10⁻³, Φ(+^•OH) = 4.1 to 4.3 × 10⁻⁶, and f _TMP = 1.22 to 1.23 × 10² L Einstein⁻¹ under simulated sunlight and from Φ(+¹O₂) = 1.4 to 2.3 × 10⁻², Φ(+^•OH) = 1.3 to 3.5 × 10⁻³, and f _TMP = 3.3 to 3.9 × 10² L Einstein⁻¹ under UV. Although UW-BOS are not necessarily better than natural DOM regarding photosensitizing properties, they do sensitize the production of RI and could potentially be used in engineered treatment systems.

     

Reducing Indoor Air Formaldehyde Concentrations

Urea-formaldehyde resin bonded partlcleboard, medium density fiberboard and plywood paneling are used as flooring, wall paneling, for cabinet work and in furniture, and are present In almost every office, home and public building. If large quantities of these products are used In poorly ventilated spaces, high manufacturing quality control is necessary to avoid problems of latent formaldehyde release. Indoor air formaldehyde concentrations depend on the nature of the product, the product surface to air volume (loading) factor, temperature, humidity, age and product emission rates. Standard test methods are now available for measuring product emission rates that make It possible to predict the performance of UF-bonded pressed wood materials If use conditions and environmental parameters are known. Recent modifications In adhesive and board manufacturing parameters have made It possible to reduce formaldehyde emission significantly, and UF-bonded wood products are now capable of meeting indoor air quality standard levels of 0.1 ppm under almost all customary loading conditions.     

Effect of Gasoline Formulation on the Formation of Photosmog: A Box Model Study

Abstract

Based on exhaust gas analyses from the combustion of five different types of gasoline in a passenger car operated on a chassis dynamometer, box model simulations of the irradiation of exhaust/NO_x /air mixtures using an established chemical mechanism for a standardized photo-smog scenario were performed. The fuel matrix used covered wide fractional ranges for paraffinic, olefinic, and aromatic hydrocarbons. Two fuels also contained methyl tertiary butyl ether (MTBE). The different O₃ profiles calculated for each run were compared and interpreted. The O₃ levels obtained were strongly influenced by the exhaust gas concentrations of aromatic and olefinic hydro-carbons. The higher exhaust content of these compounds caused higher O₃ production in the smog system investigated. The conclusion of the present study is that the composition of gasoline cannot be taken directly for the estimation of the emissions’ O₃ creation potential from its combustion. Variation of the dilution in the different calculations showed evidence for an additional influence of transport effects. Accordingly, further detailed exhaust gas analyses followed by more complex modeling studies are necessary for a proper characterization of the relationship between fuel blend and gasoline combustion products.     

Effects of droplet density and concentration on the efficacy of bacillus thuringiensis and carbaryl against gypsy moth larvae (Lymantria dispar L.)

Abstract

The feeding behavior of gypsy moth larvae exposed to two pesticide deposits (Bt and carbaryl) on oak leaf disks was monitored to determine the relationships between its efficacy and application parameters (droplet density and pesticide concentration). A range of pesticide concentrations and droplet densities (from 9 to 149 droplets/cm²) was used to simulate high and low application rates produced by different methods of application in the field.

The LD₅₀ and the LC₅₀, appeared to be affected by the spatial distribution of the deposit on the leaf surface. Both Bt and carbaryl showed a decreasing LD₅₀ at increasing time after spray. The LD₅₀ of Bt decreased from 14.1 BIU/liter to 3.1 BIU/Iiter between 48 and 144 hours after spray. The results show that feeding inhibition by Bt is more closely related to concentration than to droplet density and dose per unit area with the highest feeding inhibition occurring at 10 BIU/liter at 9 droplets/cm². With carbaryl, an increase in both concentration and droplet density was necessary to cause a decrease in leaf area eaten by larvae.     

Abundance of denitrification genes under different peizometer depths in four Irish agricultural groundwater sites

This study examined the relationship between the abundance of bacterial denitrifiers in groundwater at four sites, differing with respect to overlaying land management and peizometer depth. Groundwater was sourced from 36 multilevel piezometers, which were installed to target different groundwater zones: (1) subsoil, (2) subsoil to bedrock interface, and (3) bedrock. The gene copy concentrations (GCCs), as gene copies per liter, for bacterial 16S rRNA genes and the denitrifying functional genes, nirK, nirS, and nosZ, were determined using quantitative polymerase chain reaction assays. The results were related to gaseous nitrogen emissions and to the physicochemical properties of the four sites. Overall, nirK and nirS abundance appeared to show no significant correlation to N₂O production (P?=?0.9989; P?=?0.3188); and no significant correlation was observed between nosZ and excess N₂ concentrations (P?=?0.0793). In the majority of piezometers investigated, the variation of nirK and nirS gene copy concentrations was considered significant (P?<?0.0001). Dissolved organic carbon (DOC) decreased with aquifer depth and ranged from 1.0–4.0 mg l^?1, 0.9–2.4 mg l^?1, and 0.8–2.4 mg l^?1 within piezometers located in the subsoil, subsoil/bedrock interface, and bedrock depths, respectively. The availability of increasing DOC and the depth of the water table were positively correlated with increasing nir and nosZ GCCs (P?=?0.0012). A significant temporal correlation was noted between nirS and piezometer depth (P?<?0.001). Interestingly, the nirK, nirS, and nosZ GCCs varied between piezometer depths within specific sites, while GCCs remained relatively constant from site to site, thus indicating no direct impact of agricultural land management strategies investigated on denitrifier abundance.     

Using photographic image analysis to assess ground cover: a case study of forest road cutbanks

Road prisms, including cutbanks, road surfaces, and fillslopes, can be important contributors of sediment to streams in forested watersheds. Following road construction, cutbanks and fillslopes are often seeded, mulched, and sometimes fertilized to limit erosion and sedimentation. Assessing the success of vegetation establishment on cutbanks and fillslopes is a common task of forested land managers. This study developed and applied a photographic image analysis method to assess percent ground cover along an entire cutbank of a cut-and-fill haul road in the Monongahela National Forest in Tucker County, West Virginia. Variable-sized sections were employed to quantify the vegetative cover. Measurements obtained by this technique were similar to more commonly applied fixed-area plots, and it proved to be a useful tool for land managers who require a more repeatable quantification of ground cover than is possible through visual assessments. Cutbank slope and aspect also were analyzed to determine their potential impact on cutbank vegetation establishment. Slope was not a significant variable in explaining differences in vegetation cover; however, aspect did affect vegetation establishment. South-facing aspects had significantly lower percent vegetation cover than northeast, east, northwest, and north northwest aspects after the first year following seeding and throughout the entire study. Mean percent cover on the south-facing cutbanks was 32% over all time periods, compared to 60% to 73% for the other represented aspects. This result was expected since south-facing slopes generally are drier in the growing season and are subject to more freeze–thaw cycles in the winter. Timber felled onto the cutbank also decreased vegetative cover in the short term on north and north northwest aspects, but vegetation quickly became reestablished on these aspects with their favorable growing conditions.     

Pilot‐scale evaluation of in situ cometabolic bioremediation of TCE in groundwater using PHOSter® technology

A study was conducted to evaluate the efficacy of PHOSter® technology for treating groundwater contaminated with trichloroethene (TCE) at Edwards Air Force Base, California. The technology consists of injecting a gaseous mixture of air, methane, and nutrients into groundwater with the objective of stimulating the growth of methanotrophs, a naturally occurring microbial group that is capable of catalyzing the aerobic degradation of chlorinated solvents into nontoxic products. Injection operations were performed at one well for a period of three months. Six monitoring wells were utilized for groundwater and wellhead vapor monitoring and for groundwater and microbial sampling. In the five monitoring wells located within 44 feet of the injection well, the following results were observed: dissolved oxygen concentrations increased to a range between 6 and 8 milligrams per liter (μg/L); the biomass of target microbial groups increased by one to five orders of magnitude; and TCE concentrations decreased by an average of 92 percent, and to below the California primary maximum contaminant level (MCL; 5 micrograms per liter [µg/L]) in the well closest to the injection well. © 2008 Wiley Periodicals, Inc. *

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.