Identifying conservation priorities for threatened Eastern Himalayan mammals

To augment mammal conservation in the Eastern Himalayan region, we assessed the resident 255 terrestrial mammal species and identified the 50 most threatened species based on conservation status, endemism, range size, and evolutionary distinctiveness. By using the spatial analysis package letsR and the complementarity core‐area method in the conservation planning software Zonation, we assessed the current efficacy of their protection and identified priority conservation areas by comparing protected areas (PAs), land cover, and global ecoregion 2017 maps at a 100 × 100 m spatial scale. The 50 species that were most threatened, geographically restricted, and evolutionarily distinct faced a greater extinction risk than globally nonthreatened and wide‐ranging species and species with several close relatives. Small, medium‐sized, and data‐deficient species faced extinction from inadequate protection in PAs relative to wide‐ranging charismatic species. There was a mismatch between current PA distribution and priority areas for conservation of the 50 most endangered species. To protect these species, the skewed regional PA distribution would require expansion. Where possible, new PAs and transboundary reserves in the 35 priority areas we identified should be established. There are adequate remaining natural areas in which to expand current Eastern Himalayan PAs. Consolidation and expansion of PAs in the EH requires strengthening national and regional transboundary collaboration, formulating comprehensive regional land‐use plans, diversifying conservation funding, and enhancing information sharing through a consolidated regional database.     

Characterizing species co-occurrence patterns of imperfectly detected stream fishes to inform species reintroduction efforts

Species reintroduction efforts can improve the recovery of imperiled species, but successful implementation of this conservation strategy requires a thorough understanding of the abiotic and biotic factors influencing species viability. Species interactions are especially understudied, in particular by omitting the effect of imperfect detection on negative, neutral, or positive associations within a community. Using repeat surveys from 5 southern Ontario, Canada, Great Lakes tributaries, we quantified species co-occurrence patterns with the eastern sand darter (ESD) (Ammocrypta pellucida), listed as federally threatened, and characterized how imperfect detection during sampling can influence inference regarding these relationships. We used a probabilistic framework that included 3 approaches of increasing complexity: probabilistic co-occurrence analysis ignoring imperfect detection; single-species occupancy models with subsequent co-occurrence analysis; and 2-species occupancy models. We then used our occupancy models to predict suitable sites for potential future reintroduction efforts while considering the influence of negative species interactions. Based on the observed data, ESD showed several positive associations with co-occurring species; however, species associations differed when imperfect detection was considered. Specifically, a negative association between ESD and rosyface shiner (Notropis rubellus) was observed only after accounting for imperfect detection in the Grand River. Alternatively, positive associations in the Grand River between ESD and northern hogsucker (Hypentelium nigricans) and silver shiner (Notropis photogenis) were observed regardless of whether imperfect detection was accounted for. Our models predicted several potential reintroduction sites for ESD in formerly occupied watersheds with high levels of certainty. Overall, our results demonstrate the importance of investigating imperfect detection and species co-occurrence when planning reintroduction efforts.     

Satellite-based decadal change assessments of pan-Arctic environments

Remote sensing can advance the work of the Circumpolar Biodiversity Monitoring Program through monitoring of satellite-derived terrestrial and marine physical and ecological variables. Standardized data facilitate an unbiased comparison across variables and environments. Using MODIS standard products of land surface temperature, percent snow covered area, NDVI, EVI, phenology, burned area, marine chlorophyll, CDOM, sea surface temperature, and marine primary productivity, significant trends were observed in almost all variables between 2000 and 2017. Analysis of seasonal data revealed significant breakpoints in temporal trends. Within the terrestrial environment, data showed significant increasing trends in land surface temperature and NDVI. In the marine environment, significant increasing trends were detected in primary productivity. Significantly earlier onset of green up date was observed in bioclimate subzones C&E and longer end of growing season in B&E. Terrestrial and marine parameters showed similar rates of change with unidirectional change in terrestrial and significant directional and magnitude shifts in marine.     

Book reviews

Deregulation in the European Union: environmental perspectives. U. Collier (Ed.), 1998, London, Routledge, ISBN 0 415 15694 7, £47.50 (hbk)

Protecting the European Environment: enforcing EC environmental law. H. Somsen (Ed.), 1996, London, Blackstone Press, ISBN 185 431 6044, £19.95

Green Parties and Politics in the European Union. Elizabeth Bomberg, 1998, London, Routledge, ISBN 0 415102 650, £15.99 (pbk)

British Environmental Policy and Europe. Philip Lowe & Stephen Ward (Eds), 1998, London, Routledge, ISBN 0 415155 010, £16.99 (pbk)

Wolf in the Garden: the land rights movement and the new environmental debate. Philip D. Brick & R. McGreggor Cawley (Eds), 1996, Lanham, MD, Rowman & Littlefield, ISBN 08476 8184 X, US$67.50 (hbk) ISBN 08476 8185 8, US$24.95 (pbk)

Fresh Water. E. C. Pielou, 1998, Chicago, IL, University of Chicago Press, ISBN 0 226 66815 0, US$24/£19.25 (hbk)

Environment and Politics. Timothy Doyle & Doug McEachern, 1998, London, Routledge, ISBN 0415 14776, £10.99

Eat Your Genes: how genetically modified food is entering our diet. S. Nottingham, 1998, London, Zed Books, ISBN 1 85649 577 9, £32.95 (hbk) ISBN 1 85649 578 7, £11.95 (pbk)

Working for Better Environmental Performance in SMEs. PACTE programme of the European Commission, 1997, Project of Berlin, Bristol, Copenhagen and Vienna¹ (no charge)

Love Canal, the Story Continues. Lois Marie Gibbs, 1998, Gabriola Island, BC, New Society Publishers, ISBN 0 86571 382 0, US$16.95/Can$19.95 (pbk)     

Ableitungskriterien für Geringfügigkeitsschwellen zur Beurteilung von Grundwasserverunreinigungen

Ohne Zusammenfassung     

Integrating fast feedback and GIS to plan for important agricultural land designations in Kauai County,Hawaii

With increased affluence worldwide, planning for and preserving land for agriculture and conservation have become important goals in many communities. In Hawaii, the identification and designation of Important Agricultural Land (IAL) was first proposed at the 1978 Hawaii Constitutional Convention and approved by voters the same year. The state is required to conserve and protect agricultural lands, promote diversified agriculture, increase agricultural self-sufficiency, and assure the availability of agriculturally suitable lands. Act 183 in 2005 extended these efforts by defining IAL. The law established eight criteria to evaluate IAL and created county-led and landowner-initiated processes for designating IAL. It also specified policies for promoting agricultural production and identified landowner incentives for the designation of IAL. A central challenge facing policymakers is how to operationalize and implement these land use policies. This paper describes methods used to operationalize Act 183. We use fast feedback (i-Clicker technology) devices for capturing stakeholder preferences and geographic information systems and community mapping to visualize policy impacts and integrate community feedback. The methods developed in this paper have broad applications to jurisdictions around the world looking for data-driven approaches to planning and designating land uses according to legislative mandates or administrative requirements.     

Photochemical generation of reactive intermediates from urban-waste bio-organic substances under UV and solar irradiation

Singlet oxygen (¹O₂), hydroxyl radicals (^•OH), and excited triplet states of organic matter (³OM^*) play a key role in the degradation of pollutants in aquatic environments. The formation rates and quantum yields (Φ) of these reactive intermediates (RI) through photosensitized reactions of dissolved organic matter (DOM) have been reported in the literature for decades. Urban biowaste-derived substances (UW-BOS), a form of organic matter derived from vegetative and urban waste, have recently been shown to be efficient sensitizers in the photo-degradation of different contaminants. Nevertheless, no quantitative measurements of photo-oxidant generation by UW-BOS have been reported. In this study, the formation quantum yields of ¹O₂ and ^•OH, as well as quantum yield coefficients of TMP degradation (indicative of ³OM^* formation), were quantified for two UW-BOS samples, under 254-nm UV radiation or simulated sunlight and compared to a DOM standard from the Suwanee River (SRNOM). Values of Φ for UW-BOS samples ranged from Φ(+¹O₂) = 8.0 to 8.8 × 10⁻³, Φ(+^•OH) = 4.1 to 4.3 × 10⁻⁶, and f _TMP = 1.22 to 1.23 × 10² L Einstein⁻¹ under simulated sunlight and from Φ(+¹O₂) = 1.4 to 2.3 × 10⁻², Φ(+^•OH) = 1.3 to 3.5 × 10⁻³, and f _TMP = 3.3 to 3.9 × 10² L Einstein⁻¹ under UV. Although UW-BOS are not necessarily better than natural DOM regarding photosensitizing properties, they do sensitize the production of RI and could potentially be used in engineered treatment systems.

     

Reducing Indoor Air Formaldehyde Concentrations

Urea-formaldehyde resin bonded partlcleboard, medium density fiberboard and plywood paneling are used as flooring, wall paneling, for cabinet work and in furniture, and are present In almost every office, home and public building. If large quantities of these products are used In poorly ventilated spaces, high manufacturing quality control is necessary to avoid problems of latent formaldehyde release. Indoor air formaldehyde concentrations depend on the nature of the product, the product surface to air volume (loading) factor, temperature, humidity, age and product emission rates. Standard test methods are now available for measuring product emission rates that make It possible to predict the performance of UF-bonded pressed wood materials If use conditions and environmental parameters are known. Recent modifications In adhesive and board manufacturing parameters have made It possible to reduce formaldehyde emission significantly, and UF-bonded wood products are now capable of meeting indoor air quality standard levels of 0.1 ppm under almost all customary loading conditions.     

Effect of Gasoline Formulation on the Formation of Photosmog: A Box Model Study

Abstract

Based on exhaust gas analyses from the combustion of five different types of gasoline in a passenger car operated on a chassis dynamometer, box model simulations of the irradiation of exhaust/NO_x /air mixtures using an established chemical mechanism for a standardized photo-smog scenario were performed. The fuel matrix used covered wide fractional ranges for paraffinic, olefinic, and aromatic hydrocarbons. Two fuels also contained methyl tertiary butyl ether (MTBE). The different O₃ profiles calculated for each run were compared and interpreted. The O₃ levels obtained were strongly influenced by the exhaust gas concentrations of aromatic and olefinic hydro-carbons. The higher exhaust content of these compounds caused higher O₃ production in the smog system investigated. The conclusion of the present study is that the composition of gasoline cannot be taken directly for the estimation of the emissions’ O₃ creation potential from its combustion. Variation of the dilution in the different calculations showed evidence for an additional influence of transport effects. Accordingly, further detailed exhaust gas analyses followed by more complex modeling studies are necessary for a proper characterization of the relationship between fuel blend and gasoline combustion products.