Air monitoring of solvent exposed workers with passive samplers in comparison to “biological monitoring (BM)"†

A study was performed comparing ambient air monitoring (AM) and biological monitoring (BM) in order to evaluate the reliability of passive sampling (PS) in occupational medicine.

Five groups of persons (total number = 188) exposed to tetrachloroethene, isopropanol, toluene, xylene and styrene at the workplace were examined.

AM was performed over several hours using one or two brands of passive samplers (Monitor 3500 and/or ORSA 5). BM includes the determination of the solvent and specific metabolites resp. in blood or urine samples taken at the end of workshift. On the basis of our results we recommend that PS can supply relevant data for the estimation of external exposure to several solvents like chlorinated‐ and aromatic‐hydrocarbons.     

Spatial trends in abundance of long-finned pilot whales, white-beaked dolphins and harbour porpoises in West Greenland

Data from an aerial line transect survey conducted off West Greenland during August–September 2007 were used to estimate the abundance of long-finned pilot whales (Globicephala melas), white-beaked dolphins (Lagenorhynchus albirostris) and harbour porpoises (Phocoena phocoena). The abundance of each species was estimated using mark-recapture distance sampling techniques to correct for perception bias, and correction factors for time spent at the surface were applied. The fully corrected abundance estimates were 8,133 long-finned pilot whales, 11,984 white-beaked dolphins and 33,271 harbour porpoises. Based on density surface modelling methods, a count model with a generalised additive model formulation was used to relate abundance to spatial variables. Response curves indicated that the preferred habitats were deep offshore areas in Midwest Greenland for pilot whales, deep water over steep seabed slopes in South Greenland for white-beaked dolphins and relatively shallow inshore waters in Midwest–South Greenland for harbour porpoises. The abundance estimates and spatial trends for the three species are the first obtained from Greenland.     

Population genetics of the nurse shark (Ginglymostoma cirratum) in the western Atlantic

The nurse shark, Ginglymostoma cirratum, inhabits shallow, tropical, and subtropical waters in the Atlantic and the eastern Pacific. Unlike many other species of sharks, nurse sharks are remarkably sedentary. We assayed the mitochondrial control region and eight microsatellite loci from individuals collected primarily in the western Atlantic to estimate the degree of population subdivision. Two individuals from the eastern Atlantic and one from the Pacific coast of Panama also were genotyped. Overall, the mtDNA haplotype (h = 48 ± 5%) and nucleotide (π = 0.08 ± 0.06%) diversities were low. The microsatellite data mirror the mitochondrial results with the average number of alleles ([`(N)]<sub>A</sub> \bar{N}_{A}  = 9) and observed heterozygosity ([`(H)]_O \bar{H}_{O}  = 0.58) both low. The low levels of diversity seen in both the mtDNA and the microsatellite may be due to historical sea level fluctuations and concomitant loss of shallow water habitat. Eight of the 10 pair-wise western Atlantic F _ST estimates for mtDNA indicated significant genetic subdivision. Pair-wise F _ST values for the microsatellite loci indicated a similar pattern as the mtDNA. The western Atlantic population of nurse sharks is genetically subdivided with the strongest separation seen between the offshore islands and mainland Brazil, likely due to deep water acting as a barrier to dispersal. The eastern and western Atlantic populations were closely related. The eastern Pacific individual is quite different from Atlantic individuals and may be a cryptic, sister species.     

An inventory of tree species in Europe—An essential data input for air pollution modelling

We present a detailed tree species inventory covering Europe, parts of Africa and parts of Asia. The inventory contains 39 groups of species that are important for biogenic VOCs or pollen emission calculations. For example: oak (Quercus), poplar (Populus), pines (Pinus), spruce (Picea), birch (Betula) and alder (Alnus). The inventory is based on national forest inventories and national statistics and gives tree species distribution in percentage within broadleaved as well as conifer forests. The inventory includes data from 799 regions and is redistributed into the 50 km × 50 km EMEP grid. The inventory is therefore prepared for easy implementation into atmospheric transport models by providing an extension to already applied land use data such as the Corine Land Cover (CLC2000) or Global Land Cover (GLC2000). The gridded version of the data set will be available on the webpage http://www.dmu.dk/International/Air/Models/Background/Trees/.     

Production, hatching success and surface ornamentation of eggs of calanoid copepods during a winter at 57°N

Close to 50 species of marine Calanoid copepods have been reported to produce diapause eggs (Engel and Hirche in J Plankton Res 26:1083–1093, 2004); eggs that are viable but require a refractory phase before they hatch, sometimes after months. Diapause eggs are often described as morphologically different with respect to egg membrane ultrastructure and having a thicker egg shell with surface ornamentation as opposed to the smooth shell found in subitaneous eggs that hatch within days (Belmonte in J Mar Syst 15:35–39, 1998; Chen and Marcus in Mar Biol 127:587–597, 1997; Castro-Longoria in Crustaceana 74:225–236, 2001). Egg production rates, egg surface ornamentation, and hatching success were monitored in large aquaculture fish enclosures during winter with close to zero water temperatures (N57°). Surprisingly, all female copepods (Acartia spp.—presumably A. tonsa, and Centropages hamatus) produced eggs all through the winter with no obvious pattern with respect to light, temperature and food availability, and no diapause eggs were observed. However, individual females produced several categories of eggs with or without surface spines even within the same egg batch as evidenced by scanning electron microscopy (SEM). Four egg categories were distinguishable: ‘no spines’, smooth eggs; ‘short spines’, 5–15 μm long; ‘truncated spines’, with the spine tips cut-off <10 μm long; and ‘long spines’, up to 30 μm long. All egg categories remained unchanged with respect to surface structures from when we took them out of the incubation bottles until they hatched. In general, the frequency of ‘no spines’ was 10–40%, and most eggs were ornamented with ‘short-’ or ‘long spines’. Further, a given egg can be ornamented with all types of surface spines simultaneously, which might even be a fifth egg category. The different egg categories were all able to hatch within days when exposed to normoxic conditions suggesting that they were subitaneous.     

A method for building spatial model of annual weed seed dispersal from experimental data and its application to simulating Bromus sterilis population dispersal

Spatial model of annual weed seed dispersal, in this article, was theoretically derived. According to the requirements of building the spatial model, we designed and done an indoor experiment of weed seed dispersal by wind. In the experiment, the seeds of Bromus sterilis were released at 100 cm height under different wind velocity conditions. Based on the experimental data, the spatial models of seed dispersal of the weed species were built, which were divided into three types according to the coefficient β < 0, β = 0, β > 0. The results showed that dispersal of annual weed seed in any direction obeyed an approximate Gaussian distribution; under the experimental conditions, spatial distribution type of weed seed dispersal changed with variation of wind velocity. Well-known Howard et al.'s model (Howard et al., 1991) of Bromus sterilis seed dispersal is an especial example of the model built in this article. The result of model analysis indicated that the distribution type described by Howard's model was similar to that of seed dispersal of the weed species at the height of 100 cm under the condition of lower wind velocity (about 2.18 m/s). Using CA simulation analysis we found that mean control agent applying to a cell with weed should have a decrease with an increase of wind velocity to prevent weed with the initial configuration from spreading, which implicated less herbicide needs spraying in every cell with weed on average when wind velocity increases.     

Adsorption of cadmium, copper, nickel, and zinc to a poly(tetrafluorethene) porous soil solution sampler

Suction cups made of poly(tetrafluorethene) (PTFE) are widely used for sampling of soil solution. A brand (Prenart) of PTFE cups was tested for adsorption of Cd, Cu, Ni, and Zn at low concentrations under different conditions. In a laboratory experiment adsorption from a 10 microg L(-1) heavy metal solution with a 0.01 M NaCl background electrolyte was investigated at pH 3.6, 4.5, and 5.8 by pumping the solutions through the cups. The effect of three different ionic compositions was also investigated using 0.01 M CaCl2, 0.01 M NaCl, and no background electrolyte at pH 4.5. In 0.01 M NaCl electrolyte at pH 5.8 the cups acted as effective filters. At pH 3.6 after 300 mL of solution had passed through the cup, equivalence between the Cd and Ni concentrations in influent and effluent was found. No equivalence between effluent and influent concentrations was found for Zn and Cu at pH 4.5 and 5.8. With Ca as the electrolyte, no adsorption of Cd, Ni, or Zn was found. In Na electrolyte, equivalence between influent and effluent concentrations for Cd, Ni, and Zn was reached. The difference between effluent and influent concentrations of Zn, Ni, and Cd remained significant in the absence of electrolyte. For all pH values and electrolytes the difference between effluent and influent concentrations of Cu was significant. It is concluded that PTFE cups affect the concentrations of heavy metals sampled at low soil solution concentrations. Cadmium, Cu, Ni, and Zn adsorb to the cup at pH > 4.5 and low ionic strength.     

pH-dependent release of cadmium,copper, and lead from natural and sludge-amended soils

The pH-dependent release of cadmium, copper, and lead from soil materials was studied by use of a stirred flow cell to quantify their release and release rates, and to evaluate the method as a test for the bonding strength and potential mobility of heavy metals in soils. Soil materials from sludge-amended and nonamended A horizons from a Thai coarse-textured Kandiustult and a Danish loamy Hapludalf were characterized and tested. For each soil sample, release experiments with steady state pH values in the range 2.9 to 7.1 and duration of 7 d were performed. The effluent was continuously collected and analyzed. Release rates and total releases were higher for the Hapludalf than the Kandiustult and higher for the sludge-amended soils than the nonamended soils. With two exceptions the relative release rates (release rate/total content of metal in soil) plotted vs. steady state pH followed the same curves for each metal, indicating similar bonding strengths. These curves could be described by a rate expression of the form: relative release rate = k[H+]a, with specific a (empirical constant) and k (rate constant) parameters for each metal demonstrating that metal release in these systems can be explained by proton-induced desorption and dissolution reactions. With decreasing pH, pronounced increases in release rates were observed in the sequence cadmium > lead > copper, which express the order of metal lability in the soils. The flow cell system is useful for comparison of metal releases as a function of soil properties, and can be used as a test to rank soils with respect to heavy metal leaching.