Determining sources of dissolved organic carbon and disinfection byproduct precursors to the McKenzie River, Oregon

This study was conducted to determine the main sources of dissolved organic carbon (DOC) and disinfection byproduct (DBP) precursors to the McKenzie River, Oregon (USA). Water samples collected from the mainstem, tributaries, and reservoir outflows were analyzed for DOC concentration and DBP formation potentials (trihalomethanes [THMFPs] and haloacetic acids [HAAFPs]). In addition, optical properties (absorbance and fluorescence) of dissolved organic matter (DOM) were measured to provide insight into DOM composition and assess whether optical properties are useful proxies for DOC and DBP precursor concentrations. Optical properties indicative of composition suggest that DOM in the McKenzie River mainstem was primarily allochthonous--derived from soils and plant material in the upstream watershed. Downstream tributaries had higher DOC concentrations than mainstem sites (1.6 +/- 0.4 vs. 0.7 +/- 0.3 mg L(-1)) but comprised < 5% ofmainstem flows and had minimal effect on overall DBP precursor loads. Water exiting two large upstream reservoirs also had higher DOC concentrations than the mainstem site upstream of the reservoirs, but optical data did not support in situ algal production as a source of the added DOC during the study. Results suggest that the first major rain event in the fall contributes DOM with high DBP precursor content. Although there was interference in the absorbance spectra in downstream tributary samples, fluorescence data were strongly correlated to DOC concentration (R2 = 0.98), THMFP (R2 = 0.98), and HAAFP (R2 = 0.96). These results highlight the value of using optical measurements for identifying the concentration and sources of DBP precursors in watersheds, which will help drinking water utilities improve source water monitoring and management programs.     

Mason Valley Groundwater Model: Linking Surface Water and Groundwater in the Walker River Basin,Nevada1

Carroll, Rosemary W.H., Greg Pohll, David McGraw, Chris Garner, Anna Knust, Doug Boyle, Tim Minor, Scott Bassett, and Karl Pohlmann, 2010. Mason Valley Groundwater Model: Linking Surface Water and Groundwater in the Walker River Basin, Nevada. Journal of the American Water Resources Association (JAWRA) 46(3):554-573. DOI: 10.1111/j.1752-1688.2010.00434.x Abstract: An integrated surface water and groundwater model of Mason Valley, Nevada is constructed to replicate the movement of water throughout the different components of the demand side of water resources in the Walker River system. The Mason Valley groundwater surface water model (MVGSM) couples the river/drain network with agricultural demand areas and the groundwater system using MODFLOW, MODFLOW’s streamflow routing package, as well as a surface water linking algorithm developed for the project. The MVGSM is capable of simulating complex feedback mechanisms between the groundwater and surface water system that is not dependent on linearity among the related variables. The spatial scale captures important hydrologic components while the monthly stress periods allow for seasonal evaluation. A simulation spanning an 11-year record shows the methodology is robust under diverse climatic conditions. The basin-wide modeling approach predicts a river system generally gaining during the summer irrigation period but losing during winter months and extended periods of drought. River losses to the groundwater system approach 25% of the river’s annual budget. Reducing diversions to hydrologic response units will increase river flows exiting the model domain, but also has the potential to increase losses from the river to groundwater storage.     

Some flame retardants and the antimicrobials triclosan and triclocarban enhance the androgenic activity in vitro

Contaminants including flame retardants, antimicrobial agents and phthalates, occurring as residues in human tissues were associated with altered endocrine function. In our study we analysed the flame retardants tetrabromobisphenol A (TBBPA), hexabromocyclodecane (HBCD), penta-bromodiphenylether (BDE-100) and hexa-BDE (BDE-155), the antimicrobial compounds triclosan (TCS) and triclocarban (TCC) and eight phthalates for their androgenic and antiandrogenic activity in vitro in the MDA-kb2 cell line. No or only weak androgenic activity was observed for all the tested compounds. TBBPA showed weak antiandrogenic activity, which was demonstrated for the first time. The flame retardants HBCD, BDE-100 and BDE-155 enhanced the dihydrotestosterone-dependent activation of androgen receptor-responsive gene expression but exhibited little or no agonistic activity. The enhancement reached 150%, which was similar to the antimicrobials (TCS up to 180%, and TCC up to 130%). This enhancement of androgenic activity represents a novel mode of action of the endocrine activity of flame retardants. In contrast, most phthalates showed antiandrogenic activity. Butylbenzyl phthalate (BBP), dibutyl phthalate (DBP) and diethyl phthalate (DEP) showed strong antiandrogenicity, whereas the action of diethylhexyl phthalate (DEHP), dipentyl phthalate (DPP), dimethyl phthalate (DMP), and the DEHP metabolite monoethylhexyl phthalate (MEHP) was lower. Our in vitro study demonstrates for the first time a weak antiandrogenic activity of TBBPA, and a significant enhancement of the androgenic activity of HBCD, BDE-100 and BDE-155, which represents a novel mechanism of hormonal activity of flame retardants.     

Life Cycle Analyses and Resource Assessments

Prof. Ulgiati stresses that we should always use an ecosystem view when transforming energy from one form to another. Sustainable growth and development of both environmental and human-dominated systems require optimum use of available resources for maximum power output. We have to adapt to the laws of nature because nature has to take care of all the waste products we produce. The presentation addresses a much needed shift away from linear production and consumption pattern, toward reorganization of economies and lifestyle that takes complexity—of resources, of the environment and of the economy—into proper account. The best way to reach maximum yield from the different kinds of biomass is to use biorefineries. Biorefinery is defined as the sustainable processing of biomass into a spectrum of marketable products like heat, power, fuels, chemicals, food, feed, and materials. However, biomass from agricultural land must be used for the production of food and not fuel. Prof. Voss focuses on the sustainability of energy supply chains and energy systems. Life cycle analyses (LCA) provides the conceptual framework for a comprehensive comparative evaluation of energy supply options with regard to their resource requirements as well as the health and environmental impact. Full scope LCA considers not only the emissions from plant operation, construction, and decommissioning but also the environmental burdens and resource requirements associated with the entire lifetime of all relevant upstream and downstream processes within the energy chain. This article describes the results of LCA analyses for state-of-the-art heating and electricity systems as well as of advanced future systems. Total costs are used as a measure for the overall resource consumption.     

Rail ruminations for process safety improvement

Process safety practices have undergone multiple refinements over the past few decades, but major accidents continue to occur. Most organizations strive to improve performance by strengthening existing methods or by adopting new and/or different approaches. Central to these continual improvement efforts is the practice of applying lessons learned as a means to drive out potential risk exposures. Often, lessons learned may be transferred from other industries; indeed, high-performing organizations regularly benchmark practices outside of their immediate industry.In pursuit of continual process safety improvement, this paper examines risk management practices in the Rail Industry, and explores how methods intended for managing passenger and public rail safety may be transferred to drive continual improvement of process safety. Rail safety has its roots in engineered safety solutions; modern practices have additionally embraced the human aspects of safety performance. A selection of approaches for rail safety assessment and risk management are described in three areas considered fundamental to safety management: management of systems, management of technology, and management of human elements. In light of these examples, the authors provide views regarding how the field of process safety management may leverage the rail experience.     

Comparisons of polychromatic and monochromatic UV-based treatments of bisphenol-A in water via toxicity assessments

Polychromatic ultraviolet irradiation, such as from medium pressure (MP) Hg lamps may enhance the UV degradation of environmental pollutants as compared to low pressure (LP) Hg UV sources emitting monochromatic irradiation. Typically, studies involving destruction of environmental pollutants such as endocrine disrupting compounds (EDCs) are based on measurement of the parent compound decay using analytical chemistry, but such information is insufficient to determine an effective treatment endpoint because the identity and biological activity of many transformation products remain unknown. Bioanalytical methods to assess residual biological activity of a treated water offers one means to compare removal efficiency of EDC activity between MP- and LP-UV lamps under photolysis and UV/H2O2 oxidation. In this study, changes in estrogenic activity of bisphenol-A (BPA) as a function of UV treatment were evaluated using both an in vitro yeast estrogen screen and in vivo vitellogenin assay with Japanese medaka (Oryzias latipes) fish. Decay of BPA parent compound and formation of degradation products were followed using HPLC analysis. Results demonstrated that MP-UV direct photolysis more effectively removed BPA and associated estrogenic activity compared to LP-UV lamps. UV in combination with H2O2 significantly removed estrogenic activity in vitro and in vivo compared to direct photolysis; however, no significant difference in removal rates was found between the two lamps under UV/H2O2 oxidation. Furthermore, the UV/H2O2 process was effective for reducing embryo toxicity of BPA, but resulted in the production of acidic intermediates, causing acute toxicity and delayed hatching in some medaka embryos.     

Dilution-based emissions sampling from stationary sources: Part 1--Compact sampler methodology and performance

This paper presents the design and performance of a compact dilution sampler (CDS) for characterizing fine particle emissions from stationary sources. The sampler is described, along with the methodology adopted for its use. Dilution sampling has a number of advantages, including source emissions that are measured under conditions simulating stack gas entry and mixing in the ambient atmosphere. This is particularly important for characterizing the semivolatile species in effluents as a part of particulate emissions. The CDS characteristics and performance are given, along with sampling methodology. The CDS was compared with a reference dilution sampler. The results indicate that the two designs are comparable for tests on gas-fired units and a diesel electrical generator. The performance data indicate that lower detection limits can be achieved relative to current regulatory methods for particulate emissions. Test data for the fine particulate matter (PM2.5) emissions are provided for comparison with U.S. Environment Protection Agency (EPA) Conditional Test Method 040 for filterable particulate matter (FPM) and the EPA Method 202 for condensable particulate matter. This comparison showed important differences between methods, depending on whether a comparison is done between in situ FPM determinations or the sum of such values with condensable PM from liquid filled impingers chilled in an ice bath. These differences are interpretable in the light of semivolatile material present in the stack effluent and, in some cases, differences in detection and quantification limits. Determination of emissions from combustors using liquid fuels can be readily achieved using 1-hr sampling with the CDS. Emissions from gasfired combustors are very low, requiring careful attention to sample volumes. Sampling volumes corresponding with 6-hr operation were used for the combined mass and broad chemical speciation. Particular attention to dilution sampler operation with clean dilution air also is essential for gas-fired sources.     

Phthalate levels in Norwegian indoor air related to particle size fraction

Phthalates are found in numerous consumer products, including interior materials like polyvinyl chloride (PVC). Several studies have identified phthalates in indoor air. A recent case-control study demonstrated associations between allergic symptoms in children and the concentration of phthalates in dust collected from their homes. Here we have analyzed the content of selected phthalates in particulate matter (PM): PM(10) and PM(2.5) filter samples collected in 14 different indoor environments. The results showed the presence of the phthalates di-n-butyl phthalate (DBP), butyl benzyl phthalate (BBP), dicyclohexyl phthalate (DCHP) and diethyl hexyl phthalate (DEHP) in the samples. The dominating phthalate in both PM(10) and PM(2.5) samples from all locations was DBP. More than a 10-fold variation in the mean concentration of total phthalates between sampling sites was observed. The highest levels of total phthalates were detected in one children's room, one kindergarten, in two primary schools, and in a computer room. The relative contribution of total phthalates in PM(10) and PM(2.5) was 1.1 +/- 0.3% for both size fractions. The contribution of total phthalates in PM(2.5) to total phthalates in PM(10) ranged from 23-81%, suggesting different sources. Of the phthalates that were analyzed in the PM material, DBP was found to be the major phthalate in rubber from car tyres. However, our analyses indicate that tyre wear was of minor importance for indoor levels of both DBP as well as total phthalates. Overall, these results support the notion that inhalation of indoor PM contributes to the total phthalate exposure.     

Dioxins, dioxin-like PCBs and chloroorganic contaminants in herring, Clupea harengus, from different fishing grounds of the Baltic Sea

The contaminant levels of dioxins, dioxin-like PCBs and a range of chloroorganic compounds have been determined in relation to various fishing grounds of the Baltic Sea. Sampling covered an area from the Skagerrak to the coast of Latvia. The data are compared with herring from fishing grounds in the North Sea and west of the British Isles. Also the temporal trend of the dioxin levels in the edible part of herring landed around the Island of Rügen is given from commercial samples collected between 1996 and 2004. A continuous increase of the dioxin concentrations was observed from west to east. Lowest concentrations of 0.199 ng WHO-PCDD/F-TEQ kg(-1)wet weight were found in herring fillets west of the British Isles. Highest level of 6.972 ng WHO-PCCD/F-TEQ kg(-1)w.w. was analysed in fillets off the coast of Latvia. Results showed also a spatial dependence of the WHO-TEQ ratio dioxins:dioxin-like PCBs and of the dioxin congener profile. Only the DDT group of various chloroorganic compounds determined, showed a dependence from the fishing ground. A clear temporal tendency could not be deduced from the data.     

Using photographic image analysis to assess ground cover: a case study of forest road cutbanks

Road prisms, including cutbanks, road surfaces, and fillslopes, can be important contributors of sediment to streams in forested watersheds. Following road construction, cutbanks and fillslopes are often seeded, mulched, and sometimes fertilized to limit erosion and sedimentation. Assessing the success of vegetation establishment on cutbanks and fillslopes is a common task of forested land managers. This study developed and applied a photographic image analysis method to assess percent ground cover along an entire cutbank of a cut-and-fill haul road in the Monongahela National Forest in Tucker County, West Virginia. Variable-sized sections were employed to quantify the vegetative cover. Measurements obtained by this technique were similar to more commonly applied fixed-area plots, and it proved to be a useful tool for land managers who require a more repeatable quantification of ground cover than is possible through visual assessments. Cutbank slope and aspect also were analyzed to determine their potential impact on cutbank vegetation establishment. Slope was not a significant variable in explaining differences in vegetation cover; however, aspect did affect vegetation establishment. South-facing aspects had significantly lower percent vegetation cover than northeast, east, northwest, and north northwest aspects after the first year following seeding and throughout the entire study. Mean percent cover on the south-facing cutbanks was 32% over all time periods, compared to 60% to 73% for the other represented aspects. This result was expected since south-facing slopes generally are drier in the growing season and are subject to more freeze–thaw cycles in the winter. Timber felled onto the cutbank also decreased vegetative cover in the short term on north and north northwest aspects, but vegetation quickly became reestablished on these aspects with their favorable growing conditions.